Allied Telesis
AT-X530L-28GPX-30Allied Telesis x530L-28GPX 24-Port Gigabit PoE+ Stackable L3 Switch, 4 x 10G SFP+, 740 W (AT-X530L-28GPX-30)
The Allied Telesis x530L-28GPX 24-Port Gigabit PoE+ Stackable L3 Switch, 4 x 10G SFP+, 740 W (AT-X530L-28GPX-30) is a genuine Allied Telesis product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.
The Allied Telesis x530L-28GPX is a stackable Layer 3 Gigabit switch running the AlliedWare Plus operating system. It suits enterprise access and distribution layers where IP phones, wireless access points and surveillance cameras are powered from the switch and several units are managed together as one.
It provides 24 x 10/100/1000T PoE+ ports with a 740 W power budget, enough for the full 30 W on every port, and four 1/10 Gigabit SFP+ ports, two of which double as stacking ports. Two fixed internal power supplies give power resilience. Up to eight units can form a VCStack, including over long-distance fibre, and switching fabric is 128 Gbps.
Out of the box the switch offers Layer 2 switching with static IPv4 and IPv6 routing. Dynamic routing (RIP, OSPF, BGP), PIM multicast routing and Q-in-Q need the AT-FL-x530L-01 Premium licence; AMF Plus master, G.8032, Continuous PoE, mixed stacking with x530 switches and OpenFlow are further optional licences. The -30 order code is the version with UK power cords.
What the Allied Telesis AT-X530L-28GPX-30 is used for
- Powering IP phones, wireless access points and surveillance cameras at the full 30 W on all 24 PoE+ ports at once, from a 740 W budget
- A stackable switch for enterprise access and distribution layers, with up to eight units run as one VCStack, including over long-distance fibre
- 10 Gigabit fibre uplinks to the core through its 4 SFP+ ports, 2 of which can be used for stacking instead
- Static IPv4 and IPv6 routing as standard, with RIP, OSPF, BGP and PIM added by the Premium licence where full Layer 3 is needed
Allied Telesis AT-X530L-28GPX-30: common questions
Is the AT-X530L-28GPX-30 a Layer 3 switch?
Yes, with a condition. Static IPv4 and IPv6 routing is standard, but dynamic routing (RIP, OSPF, BGP) and PIM multicast routing need the optional AT-FL-x530L-01 Premium licence, one per stack member.
How much PoE power does it provide?
740 W, made up of 370 W from each of its two power supplies. That is enough for 30 W on all 24 PoE+ ports at the same time.
How many x530L-28GPX switches can be stacked?
Up to eight in a VCStack, or four if 1 Gbps ports are used for stacking. Stacking over long-distance fibre (VCStack LD) is also supported.
Does the x530L-28GPX have dual power supplies?
Yes. Two fixed internal AC power supplies are fitted for power resilience, and the -30 order code comes with two UK power cords.
Can it be rack mounted, and how loud is it?
Yes. It is a 1U switch supplied with two brackets for a 19-inch rack or a wall. Fan noise is 42 dB at ambient temperatures under 30 °C.
See all Allied Telesis products or network switches from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 24 x 10/100/1000T PoE+ ports and 4 x 1/10G SFP+ ports (two usable as stacking ports)
- 740 W PoE+ budget (370 W per power supply): 30 W available on all 24 ports at once
- Two fixed internal AC power supplies
- VCStack of up to eight units (four if 1 Gbps ports are used for stacking), including long-distance stacking over fibre
- 128 Gbps switching fabric and 95.2 Mpps forwarding rate
- AlliedWare Plus with Layer 2 switching and static IPv4/IPv6 routing as standard (1,000 static routes each)
- RIP, OSPF, BGP4 and PIM added by the optional AT-FL-x530L-01 Premium licence
- AMF Plus and Vista Manager EX compatible; CLI, web GUI, SNMP and NETCONF/RESTCONF management
- EPSR ring protection, with G.8032 available by licence; IEEE 802.1x, MAC and web tri-authentication
- 1U, 441 x 421 x 44 mm, 6.2 kg; rack or wall mounting with the supplied brackets
General
- Ports: 24 ports
- Power over Ethernet: PoE+ (802.3at)
- Ethernet: Gigabit
- Product type: Stackable Layer 3 Gigabit Ethernet switch with PoE+
- Series: Allied Telesis x530L Series
- Operating system: AlliedWare Plus
- Order code suffix: -30 = UK power cord (ordering table: 10 US, 20 no power cord, 30 UK, 40 AU, 50 EU)
- Part number: AT-X530L-28GPX-30
- Brand: Allied Telesis
- EAN: 767035217086
Ports
- Ethernet ports: 24 x 10/100/1000T RJ-45 (PoE+), ports 1 to 24
- Uplink ports: 4 x 1/10 Gigabit SFP+, ports 25 to 28
- Stacking ports: 2 of the SFP+ ports; usable as 1G/10G Ethernet ports when the switch is not stacked
- Management ports: RJ-45 console port and USB port on the front panel
Power over Ethernet
- PoE standard: IEEE 802.3af PoE and IEEE 802.3at PoE+ (Classes 0 to 4), up to 30 W per port
- PoE ports: 24
- PoE budget: 740 W (370 W per power supply)
- Ports powered at once: 24 at 7.5 W, 24 at 15.4 W or 24 at 30 W
Performance
- Switching fabric: 128 Gbps
- Forwarding rate: 95.2 Mpps
- MAC addresses: 16K
- VLANs: 4094 configurable VLANs
- Routes: 1,000 static IPv4 and IPv6 routes; 256 dynamic IPv4 and IPv6 routes with licence
- Jumbo frames: 10 KB Layer 2 and 9 KB Layer 3
- Memory: 1 GB DDR3 SDRAM, 256 MB NAND flash; 1.5 MB packet buffer
- Latency: 6.06 µs at 10 Mbps, 3.98 µs at 1 Gbps, 1.63 µs at 10 Gbps
Management
- Layer: Layer 2 and basic Layer 3 (static routing) as standard; full Layer 3 with the Premium licence
- Stacking: VCStack up to 8 units (4 units if 1 Gbps ports are used for stacking); long-distance stacking (VCStack LD) over fibre
- Management options: Industry-standard CLI, web-based GUI, SNMPv1/v2c/v3, Telnet, SSH, NETCONF/RESTCONF; AMF Plus and Vista Manager EX
- Licensing: AT-FL-x530L-01 Premium licence adds RIP, OSPFv2/v3, BGP4, PIM, MLD, Q-in-Q, VLAN translation, UDLD and PTP transparent mode; one licence per stack member
- Other feature licences: AMF Plus master (AT-SW-APM10-1YR/-5YR), G.8032 (AT-FL-x53L-8032), Continuous PoE (AT-FL-x53L-CPOE), mixed stacking with x530 (AT-FL-x53L-MSTK), OpenFlow v1.3 (AT-FL-x530L-OF13-1YR/-5YR)
Security
- Access control: IEEE 802.1x, MAC-based and web-based tri-authentication, ACLs, DHCP snooping, IP source guard, Dynamic ARP Inspection, private VLANs
Power
- Power supply: 2 x fixed internal AC power supplies
- Input power: 90-264 V AC (auto-ranging), 50-60 Hz
- Maximum power consumption: 70 W without PoE load; 890 W at full PoE+ load
- Maximum heat dissipation: 239 BTU/h without PoE load; 3037 BTU/h at full PoE+ load
Physical
- Dimensions: 441 x 421 x 44 mm (W x D x H)
- Weight: 6.2 kg (8.4 kg packaged)
- Mounting: 19-inch rack or wall, using the two wall/equipment rack brackets supplied
- Cooling: Fans; 42 dB at ambient temperatures under 30 °C
Environment
- Operating temperature: 0 to 50 °C
- Storage temperature: -25 to 70 °C
- Operating humidity: 5% to 90% non-condensing
- Operating altitude: 3,048 m maximum
- MTBF: 200,000 hours
- x530L-28GPX switch
- 2 m local management cable (RJ-45 to DB-9)
- 2 x AC power cords (UK, per the -30 order code)
- 4 x bumper feet with rivets
- 2 x power cord retaining clips
- 2 x wall/equipment rack brackets
- 8 x 3x6 mm bracket screws
- 2 x 4x32.3 mm wall screws
- 2 x 6x4x29.6 mm wall anchors
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
