D-Link
DGS-1210-28PD-Link DGS-1210-28P 28-Port Gigabit Smart Managed PoE Switch, 24 x PoE+ (193 W) + 4 x Combo GbE/SFP (DGS-1210-28P)
The D-Link DGS-1210-28P 28-Port Gigabit Smart Managed PoE Switch, 24 x PoE+ (193 W) + 4 x Combo GbE/SFP (DGS-1210-28P) is a genuine D-Link product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.
The D-Link DGS-1210-28P is a smart managed Gigabit Ethernet switch from the DGS-1210 Series, aimed at small and medium-sized business networks that need VLANs, link aggregation, spanning tree and basic security without the complexity of a fully managed switch. Its PoE ports power IP phones, wireless access points and network cameras over the data cable, so no separate power outlet is needed at the device.
This model has 24 x 10/100/1000BASE-T PoE ports (IEEE 802.3af/at) sharing a 193 W power budget, plus four 100/1000 Mbps combo ports usable as copper or SFP. Two fans cool the 1U chassis (44.9 to 51.7 dB(A)). Switching capacity is 56 Gbps and maximum consumption is 247.4 W with PoE in use.
Configuration is through a multilingual web interface, the D-Link Network Assistant utility, a compact CLI over Telnet and SNMP. Static routing between VLANs, Auto Voice VLAN and an ONVIF-aware Surveillance Mode are built in, and the switch keeps dual firmware images and dual configuration files. D-Link UK also lists the series as compatible with its Nuclias management platform. Optional D-Link SFP transceivers are sold separately.
What the D-Link DGS-1210-28P is used for
- Powering IP phones, wireless access points and network cameras over the data cable from 24 PoE ports sharing 193 W
- A smart managed 24 port PoE switch for small and medium-sized business networks, with VLANs, QoS and static routing between VLANs
- Uplinking to other switches over copper or fibre through 4 combo ports (1000BASE-T/SFP)
D-Link DGS-1210-28P: common questions
What is the PoE budget of the DGS-1210-28P?
193 W, shared across its 24 IEEE 802.3af/at PoE ports (ports 1 to 24). Maximum consumption with PoE in use is 247.4 W.
How loud is the DGS-1210-28P?
It is cooled by two fans. Acoustic noise is 44.9 dB(A) at low fan speed and 51.7 dB(A) at high fan speed.
Is it rack mountable?
Yes. It is a 1U chassis, 440 mm long, and a rack-mount kit is supplied. Rubber feet are included for desktop use.
Does the switch support a surveillance VLAN?
Yes. It has Auto Surveillance VLAN and an ONVIF-aware Surveillance Mode, as well as Auto Voice VLAN for IP phones.
What warranty comes with the switch?
D-Link Limited Lifetime Warranty if it is registered with D-Link Europe within 30 days of purchase; 5 years if not registered.
See all D-Link products or network switches from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 24 x 10/100/1000BASE-T PoE (IEEE 802.3af/at) ports
- 4 x 100/1000 Mbps combo ports (1000BASE-T/SFP) for fibre or copper uplinks
- 193 W PoE power budget across ports 1 to 24
- 56 Gbps switching capacity, 41.7 Mpps forwarding rate, 8K-entry MAC table
- Two fans; 51.7 dB(A) high / 44.9 dB(A) low
- Static routing: 124 IPv4 and 50 IPv6 static route entries, 4 IP interfaces
- 802.1Q VLANs (256 static groups), Auto Voice VLAN and Auto Surveillance VLAN
- ACLs, 802.1X port-based access control, port security and D-Link Safeguard Engine
- Web UI, D-Link Network Assistant, compact CLI via Telnet and SNMP v1/v2c/v3
- Dual firmware images and dual configuration files
General
- Ports: 28 ports
- Power over Ethernet: PoE+ (802.3at)
- Ethernet: Gigabit
- Product type: Smart managed Gigabit Ethernet switch with PoE
- Hardware version: F1 (D-Link UK lists hardware version Fx as the live version)
- Switching layer: Layer 2 with static routing
- Part number: DGS-1210-28P
- Brand: D-Link
- EAN: 790069373053
Ports
- Ethernet ports: 24 x 10/100/1000BASE-T PoE
- Uplink ports: 4 x 100/1000 Mbps combo ports (1000BASE-T/SFP)
- Port standards: IEEE 802.3 10BASE-T, 802.3u 100BASE-TX/100BASE-FX, 802.3ab 1000BASE-T, 802.3z 1000BASE-X, 802.3az EEE, 802.3x flow control
Power over Ethernet
- PoE standard: IEEE 802.3af/at
- PoE ports: Ports 1 to 24
- PoE budget: 193 W
- PoE features: Time-based PoE (ports switched on or off by schedule)
Performance
- Switching capacity: 56 Gbps
- Forwarding rate: 41.7 Mpps (64-byte packets)
- MAC address table: 8K entries
- Packet buffer: 4.1 Mbits
- Jumbo frames: Up to 10,000 bytes
Management
- Management interfaces: Web-based GUI, D-Link Network Assistant utility, compact CLI via Telnet, SNMP v1/v2c/v3
- Central management: D-View 7 (SNMP); D-Link UK lists the series as Nuclias compatible
- Layer 2 features: IGMP snooping v1/v2 (256 groups), MLD snooping, 802.1D/802.1w/802.1s spanning tree, LLDP/LLDP-MED, port mirroring, loopback detection, cable diagnostics
- Link aggregation: IEEE 802.3ad; up to 8 groups per device, 8 ports per group
- VLAN: 802.1Q, 256 static VLAN groups, VID 1 to 4094, asymmetric VLAN, Auto Voice VLAN, Auto Surveillance VLAN
- Layer 3 features: Static routing (124 IPv4 and 50 IPv6 static route entries), 4 IP interfaces, IPv6 neighbour discovery
- Quality of Service: 8 queues per port, 802.1p, strict and weighted round robin scheduling, port-based bandwidth control
- Firmware: Dual software images and dual configuration files
Security
- Security features: ACLs (up to 50 access lists, 768 rules), port security (up to 64 MAC addresses per port), DHCP server screening, ARP spoofing prevention, IP-MAC-port binding, D-Link Safeguard Engine, SSH v2, TLS v1.0
- Authentication: 802.1X port-based access control with local or RADIUS database
Power
- Power supply: Internal universal power supply, 100 to 240 V AC, 50/60 Hz
- Maximum power consumption: 247.4 W (PoE on); 28.1 W (PoE off)
- Standby power consumption: 16.6 W
- Heat dissipation: 844.23 BTU/hr
Physical
- Dimensions: 440 x 250 x 44 mm (L x W x H)
- Weight: 3.75 kg
- Cooling: 2 fans
- Acoustic noise: 51.7 dB(A) at high fan speed; 44.9 dB(A) at low fan speed
- Mounting: Desktop or rack; rack-mount kit and rubber feet supplied
Environment
- Operating temperature: -5 to 50 °C
- Storage temperature: -20 to 70 °C
- Operating humidity: 0% to 95% relative humidity
Compatibility
- Optional transceivers: D-Link DGS-712 (1000BASE-T), DEM-310GT (1000BASE-LX, 10 km), DEM-311GT (1000BASE-SX, 550 m), DEM-312GT2 (1000BASE-SX, 2 km), DEM-211 (100BASE-FX, 2 km)
Warranty
- Manufacturer warranty: D-Link Limited Lifetime Warranty when the switch is registered with D-Link Europe within 30 days of purchase; 5 years if not registered
- DGS-1210-28P switch
- Power cord
- Power cord retainer
- Quick Start Guide
- Rack-mount kit
- Rubber feet
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
