HPE Aruba
R7J27AHPE Aruba Networking AP-635 (RW) Tri-Radio 2x2 Wi-Fi 6E Indoor Campus Access Point, Internal Antennas (R7J27A)
The HPE Aruba Networking AP-635 (RW) Tri-Radio 2x2 Wi-Fi 6E Indoor Campus Access Point, Internal Antennas (R7J27A) is a genuine HPE Aruba product, supplied new and boxed through official UK distribution. It provides the Wi-Fi coverage that laptops, phones and wireless devices connect to.
The AP-635 is the internal-antenna model of the HPE Aruba Networking 630 Series, an indoor Wi-Fi 6E (802.11ax) campus access point for enterprise offices, education and healthcare sites that want to add the 6 GHz band alongside existing 2.4 GHz and 5 GHz coverage.
Three 2x2 MIMO radios run concurrently on 2.4 GHz (up to 574 Mbps), 5 GHz (up to 1.2 Gbps) and 6 GHz (up to 2.4 Gbps) for a 3.9 Gbps maximum aggregate data rate. Ultra tri-band filtering lets the 5 GHz and 6 GHz radios work side by side, and two 2.5 Gbps Ethernet ports with PoE input give link aggregation and hitless failover of data and power.
This is the RW (Rest of World) regulatory variant. The AP needs 802.3bt PoE (or DC) for unrestricted operation and does not run from 802.3af. It can be used stand-alone, with a gateway, or under HPE Aruba Networking Central; Central subscriptions, mount kit and power source are sold separately.
What the HPE Aruba R7J27A is used for
- Adding the 6 GHz band alongside existing 2.4 GHz and 5 GHz coverage with a tri-radio Wi-Fi 6E access point
- Indoor campus Wi-Fi for enterprise offices, education and healthcare sites, with up to 512 associated clients per radio
- Resilient wired uplinks over 2 x 2.5 Gbps Ethernet ports with PoE input, link aggregation and hitless failover of data and power
- Acting as a reference point for indoor location, using the built-in GPS receiver to self-locate
HPE Aruba R7J27A: common questions
What PoE does the R7J27A need?
802.3bt (class 5) PoE or 12 V DC for unrestricted operation. On 802.3at the USB port is disabled by default, and 802.3af is not supported. It draws up to 23.8 W on PoE without a USB device, and power sources are sold separately.
Does the AP-635 support the 6 GHz band?
Yes. It is a Wi-Fi 6E access point with three concurrent 2x2 MIMO radios: 2.4 GHz (up to 574 Mbps), 5 GHz (up to 1.2 Gbps) and 6 GHz (up to 2.4 Gbps), for a 3.9 Gbps maximum aggregate data rate.
Does it need a controller or a licence?
No controller is needed. It can run stand-alone (InstantOS), with a gateway, or under HPE Aruba Networking Central. Central AP Foundation or AP Advanced subscriptions are sold separately.
Is the mount kit included with the access point?
No. The mounting bracket pre-installed on the back attaches to AP-MNT ceiling-rail, solid-surface or wall-box mount kits, and the mount kit is sold separately.
What is the RW regulatory variant?
RW stands for Rest of World. HPE lists separate US, Japan, Israel, Egypt and Indonesia variants, and the available bands, channels and transmit power depend on the country the AP is configured for.
See all HPE Aruba Networking products or wireless access points from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- Wi-Fi 6E (802.11ax) tri-radio: 2.4 GHz, 5 GHz and 6 GHz concurrent, each 2x2 MIMO
- Up to 2.4 Gbps on 6 GHz (HE160), 1.2 Gbps on 5 GHz and 574 Mbps on 2.4 GHz; 3.9 Gbps maximum aggregate
- 2 x 100/1000/2500BASE-T Ethernet ports, both with PoE input; LACP and hitless PoE failover
- Ultra tri-band (UTB) filtering between the 5 GHz and 6 GHz radios
- Unrestricted on 802.3bt (class 5) PoE or 12 V DC; on 802.3at the USB port is disabled by default; 802.3af not supported
- Maximum power draw 23.8 W on PoE without a USB device (29.4 W with USB load)
- Built-in GPS receiver so APs can self-locate and act as reference points for indoor location
- Integrated Bluetooth Low Energy 5.0 and Zigbee (802.15.4) radio plus USB 2.0 host port
- Up to 512 associated clients per radio; 16 BSSIDs per radio (4 on 6 GHz)
- 220 x 220 x 51 mm, 1.3 kg; mount kit and power source sold separately
General
- Wi-Fi standard: Wi-Fi 6E
- Power over Ethernet: PoE++ (802.3bt)
- Product type: Indoor campus access point, internal antennas
- Model: AP-635 (regulatory model APIN0635), HPE Aruba Networking 630 Series
- Regulatory domain: RW (Rest of World): HPE lists separate US, Japan, Israel, Egypt and Indonesia variants; available bands, channels and transmit power depend on the country the AP is configured for
- Part number: R7J27A
- Brand: HPE Aruba
- EAN: 190017492834
Wireless
- Wi-Fi generation: Wi-Fi 6E (802.11ax with 6 GHz); Wi-Fi CERTIFIED 6E
- Radios: Tri radio: 2.4 GHz, 5 GHz and 6 GHz (concurrent) 802.11ax 2x2 MIMO
- Frequency bands: 2.4 GHz, 5 GHz and 6 GHz
- Spatial streams: 2 per radio (2x2:2)
- Maximum data rate: 6 GHz: up to 2.4 Gbps (2SS HE160); 5 GHz: up to 1.2 Gbps (2SS HE80); 2.4 GHz: up to 574 Mbps (2SS HE40); 3.9 Gbps maximum aggregate
- Channel widths: 20/40 MHz (2.4 GHz), 20/40/80 MHz (5 GHz), 20/40/80/160 MHz (6 GHz)
- Maximum clients: Up to 512 associated client devices per radio; 16 BSSIDs per radio (4 on the 6 GHz radio)
- Antennas: Integrated downtilt omnidirectional antennas for 2x2 MIMO; peak gain 4.6 dBi (2.4 GHz), 7.0 dBi (5 GHz) and 6.3 dBi (6 GHz)
- Maximum transmit power: +21 dBm per radio (18 dBm per chain), conducted, limited by local regulations
- IoT radio: Bluetooth Low Energy (BLE 5.0) and Zigbee (802.15.4)
- Location services: GNSS receiver; 802.11 FTM support
Ports
- Ethernet ports: 2 x 100/1000/2500BASE-T RJ-45 (E0, E1), both PoE-PD; LACP between ports; 802.3az Energy Efficient Ethernet
- USB: 1 x USB 2.0 host (Type A), up to 1 A / 5 W to an attached device
- Console port: Serial console, proprietary micro-B USB jack
Power
- Power sources: Power over Ethernet on port E0 and/or E1 (hitless failover between them) or 12 V DC; power sources sold separately
- PoE requirement: 802.3bt (class 5) for unrestricted operation; on 802.3at (class 4) with IPM disabled the USB port is disabled; 802.3af is not supported (except staging)
- Maximum power consumption: Without / with USB device: 23.8 W / 29.4 W (PoE), 20.7 W / 26.4 W (DC)
Security
- Wireless security: WPA3 and WPA2 (Enterprise, Personal), Enhanced Open (OWE); WPA2-MPSK with ClearPass Policy Manager
- Hardware security: Trusted Platform Module (TPM); Kensington security slot
Management
- Management options: Stand-alone (InstantOS), gateway based, or HPE Aruba Networking Central (cloud or on-premises); zero-touch provisioning
- Minimum software: HPE Aruba Networking OS and InstantOS 8.9.0.0; HPE Aruba Networking OS 10.4.0.0
- Licensing: HPE Aruba Networking Central AP Foundation or AP Advanced subscriptions (1, 3, 5, 7 or 10 years, cloud or on-premises) are sold separately
Physical
- Dimensions (W x D x H): 220 x 220 x 51 mm, without mount bracket
- Weight: 1.3 kg (1300 g), without mount bracket
- Mounting: Bracket pre-installed on the back of the AP attaches to HPE Aruba Networking AP-MNT ceiling-rail, solid-surface or wall-box mount kits; mount kit sold separately
Environment
- Operating temperature: 0 °C to +50 °C
- Operating humidity: 5% to 95% relative humidity
- Storage temperature: -40 °C to +70 °C (storage and transportation)
- Plenum rating: UL2043 plenum rated for use in air-handling spaces
- MTBF: 520,000 hours at +25 °C
Warranty
- Manufacturer warranty: Limited lifetime warranty: HPE Networking warranty summary lists it as ending 5 years after end of sale, with 90 days of 24x7 technical support and next-business-day hardware replacement
- AP-635 access point with mounting bracket pre-installed on the back
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
