QNAP
TS-435XEU-4G+4XST2000VN003_UKQNAP TS-435XeU 4-Bay 1U Short-Depth Rackmount NAS, 8 TB (4 x 2 TB Seagate NAS Drives) (TS-435XEU-4G+4XST2000VN003_UK)
The QNAP TS-435XeU 4-Bay 1U Short-Depth Rackmount NAS, 8 TB (4 x 2 TB Seagate NAS Drives) (TS-435XEU-4G+4XST2000VN003_UK) is a genuine QNAP product, supplied new and boxed through official UK distribution. It is storage on the network: shared files, backups and recordings kept on site, reachable by everyone who is allowed to.
The QNAP TS-435XeU is a four-bay 1U short-depth rackmount NAS with built-in 10GbE, for small businesses that need fast shared storage and backup in a shallow rack. Two SFP+ ports allow a direct 10GbE link to a switch or server without an add-in card.
It uses a Marvell OCTEON TX2 CN9130/CN9131 quad-core ARM Cortex-A72 2.2 GHz processor and ships with 4 GB of DDR4 memory in a single SODIMM slot, expandable to 32 GB. Alongside the two 10GbE SFP+ ports are two 2.5GbE ports, two M.2 2280 PCIe Gen 3 slots for NVMe SSD caching and four USB ports.
This bundle is the TS-435XEU-4G supplied with four Seagate IronWolf 2 TB NAS hard drives (ST2000VN003), 8 TB of raw capacity in total. They are 3.5-inch SATA 6 Gb/s drives running at 5,400 rpm with a 256 MB cache, CMR recording and a workload rating of 180 TB/year. Usable capacity depends on the RAID level chosen when the NAS is set up. SFP+ transceivers or DAC cables and a rail kit are not included.
The picture shows the TS-435XEU NAS. The 4 drives supplied with this bundle are not shown.
What the QNAP TS-435XEU-4G+4XST2000VN003_UK is used for
- A 1U rackmount NAS with drives included: four Seagate IronWolf 2 TB hard drives, 8 TB of raw capacity
- Fast shared storage and backup for a small business in a shallow rack: the chassis is 292.12 mm deep
- Direct 10GbE links to a switch or server through two SFP+ ports, without an add-in card
QNAP TS-435XEU-4G+4XST2000VN003_UK: common questions
Which drives are supplied with the TS-435XEU-4G+4XST2000VN003_UK?
Four Seagate IronWolf 2 TB NAS hard drives (ST2000VN003): 3.5-inch SATA 6 Gb/s, 5,400 rpm, 256 MB cache and CMR recording, with a workload rating of 180 TB/year.
How much usable capacity does the 8 TB bundle give?
8 TB is the raw capacity (4 x 2 TB) before RAID. Usable capacity depends on the RAID level chosen at set-up; JBOD, Single, RAID 0, 1, 5, 6 and 10 are supported.
Does this NAS have 10GbE ports?
Yes. Two 10GbE SFP+ ports and two 2.5GbE RJ45 ports are built in. The box contents list an Ethernet cable but no SFP+ modules.
Are rack rails included?
No. A rail kit is not included. The optional QNAP RAIL-B02 kit is sold separately.
Can the memory be upgraded?
Yes. 4 GB of DDR4 is fitted in a single SODIMM slot, expandable to 32 GB (1 x 32 GB).
See all QNAP products.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 4 x Seagate IronWolf 2 TB NAS Hard Drive (ST2000VN003) included: 8 TB raw capacity
- Drives: 3.5-inch SATA 6 Gb/s, 5,400 rpm, CMR, 256 MB cache, 180 TB/year workload rating
- 4 x 3.5-inch SATA 6 Gb/s hot-swappable drive bays (2.5-inch SATA SSDs also fit)
- 2 x 10GbE SFP+ ports and 2 x 2.5GbE RJ45 ports (2.5G/1G/100M)
- Marvell OCTEON TX2 CN9130/CN9131 quad-core ARM Cortex-A72 2.2 GHz processor
- 4 GB DDR4 memory pre-installed, expandable to 32 GB (1 x 32 GB)
- 2 x M.2 2280 PCIe Gen 3 x1 slots for NVMe SSDs; SSD cache supported
- 2 x USB 3.2 Gen 1 and 2 x USB 2.0 ports
- 1U short-depth chassis, 292.12 mm deep; 100 W power supply
- QTS operating system: JBOD, Single, RAID 0, 1, 5, 6 and 10
General
- USB: 2 USB ports
- Cellular: 5G
- Capacity: 8 TB
- Ethernet: 10GbE
- Part number: TS-435XEU-4G+4XST2000VN003_UK
- Brand: QNAP
Storage
- Drive bays: 4 x 3.5-inch SATA 6 Gb/s (2.5-inch SATA SSD compatible)
- Drives included: 4 x Seagate IronWolf 2 TB (ST2000VN003)
- Raw capacity of included drives: 8 TB (4 x 2 TB), before RAID
- Hot-swappable bays: Yes (drive bays; M.2 SSDs are not hot-swappable)
- M.2 slots: 2 x M.2 2280 PCIe Gen 3 x1 (NVMe SSD)
- SSD cache acceleration: Supported
- RAID levels: JBOD, Single, RAID 0, 1, 5, 6, 10
- Expansion units supported: QNAP expansion units (compatible models per QNAP's compatibility list)
Hardware
- Processor: Marvell OCTEON TX2 CN9130 / CN9131 ARMv8 Cortex-A72 quad-core 2.2 GHz (64-bit ARM)
- Memory: 4 GB DDR4 SODIMM
- Maximum memory: 32 GB (1 x 32 GB)
- Memory slots: 1 x SODIMM DDR4 (ECC supported from QTS 5.0.1)
- Flash memory: 4 GB (dual boot OS protection)
- Hardware encryption engine: Yes
Ports
- Ethernet ports: 2 x 10GbE SFP+, 2 x 2.5GbE RJ45 (2.5G/1G/100M)
- USB ports: 2 x USB 3.2 Gen 1, 2 x USB 2.0
Management
- Operating system: QTS
Power
- Power supply: 100 W PSU, 100-240 V
- Power consumption (operating, typical): 30.878 W
- Power consumption (disk standby): 17.367 W
Physical
- Form factor: 1U short-depth rackmount
- Dimensions: 430 x 292.12 x 43.3 mm (W x D x H), excluding rack ears and the protruding part of the power supply
- Weight: 4.91 kg (net)
- Fans: 3 x 40 mm, 12 V DC
- Rack rail kit: Not included; optional QNAP rail kit sold separately (RAIL-B02)
Environment
- Operating temperature: 0 to 40 °C
- Storage temperature: -20 to 70 °C
- Relative humidity: 5 to 95% RH non-condensing (wet bulb 27 °C)
Warranty
- Manufacturer warranty: 3 years (QNAP standard warranty)
Included drives
- Drive model: Seagate IronWolf 2 TB NAS Hard Drive
- Drive part number: ST2000VN003
- Quantity: 4
- Capacity per drive: 2 TB
- Interface: SATA 6 Gb/s
- Form factor: 3.5-inch
- Spindle speed: 5,400 rpm
- Cache: 256 MB
- Recording technology: CMR
- Workload rating: 180 TB/year
- Drive warranty: 3 years limited
- TS-435XeU NAS unit
- Ethernet cable x 1
- Power Cord x 1
- Flat head screw x 16 (for 3.5" HDD)
- Flat head screw x 12 (for 2.5" HDD)
- Hanger x 2
- Holder x 2
- Quick Installation Guide
- 4 x Seagate IronWolf 2 TB NAS Hard Drive (ST2000VN003)
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
