QNAP
TS-464-8G+4XST4000VN006_UKQNAP TS-464 4-Bay Desktop NAS, 16 TB (4 x 4 TB Seagate NAS Drives Included) (TS-464-8G+4XST4000VN006_UK)
The QNAP TS-464 4-Bay Desktop NAS, 16 TB (4 x 4 TB Seagate NAS Drives Included) (TS-464-8G+4XST4000VN006_UK) is a genuine QNAP product, supplied new and boxed through official UK distribution. It is storage on the network: shared files, backups and recordings kept on site, reachable by everyone who is allowed to.
The QNAP TS-464 is a four-bay desktop NAS for small offices, home offices and demanding home users. It is used for shared file storage, backup, collaboration and media serving, and its PCIe slot lets faster networking or extra M.2 storage be added later.
The TS-464-8G pairs an Intel Celeron N5095 quad-core processor (burst up to 2.9 GHz) with 8 GB of DDR4 memory; 16 GB is the maximum. Two 2.5GbE ports, two M.2 2280 PCIe Gen 3 slots, one PCIe Gen 3 x2 slot for a 10GbE or QM2 card and an HDMI 2.1 output are fitted.
This bundle is the TS-464-8G supplied with four Seagate IronWolf 4 TB NAS hard drives (ST4000VN006), 16 TB of raw capacity in total. They are 3.5-inch SATA 6 Gb/s drives running at 5,400 rpm with a 256 MB cache, CMR recording and a workload rating of 180 TB/year. Usable capacity depends on the RAID level chosen when the NAS is set up.
The picture shows the TS-464 NAS. The 4 drives supplied with this bundle are not shown.
What the QNAP TS-464-8G+4XST4000VN006_UK is used for
- A 4 bay NAS with drives included: four Seagate IronWolf 4 TB hard drives give 16 TB of raw capacity for a small or home office
- Shared file storage, backup and media serving, with hardware-accelerated transcoding on Intel UHD Graphics
- Growing later with SSD cache on two M.2 2280 slots, a 10GbE card in the PCIe slot or a QNAP expansion unit
QNAP TS-464-8G+4XST4000VN006_UK: common questions
What drives are in the TS-464-8G+4XST4000VN006_UK bundle?
Four 4 TB Seagate IronWolf NAS hard drives, part number ST4000VN006. Each is a 3.5-inch SATA 6 Gb/s disk that spins at 5,400 rpm, with a 256 MB cache and CMR recording.
Is all 16 TB available for files?
Not necessarily. 16 TB is the raw capacity (4 x 4 TB) before RAID, and usable capacity depends on the RAID level chosen when the NAS is set up.
Which RAID levels does the TS-464 support?
JBOD, Single, RAID 0, 1, 5, 6 and 10 under QTS, and Single, RAID 0, 1, 5, 6, 10 and Triple Mirror under QuTS hero.
Can 10GbE be added to this NAS?
Yes, as an option. The built-in ports are two 2.5GbE, and a 5GbE or 10GbE card fits the PCIe Gen 3 x2 slot.
How much RAM is fitted and what is the maximum?
8 GB of DDR4 is pre-installed and the maximum is 16 GB (2 x 8 GB).
See all QNAP products.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 4 x Seagate IronWolf 4 TB NAS Hard Drive (ST4000VN006) included: 16 TB raw capacity
- Drives: 3.5-inch SATA 6 Gb/s, 5,400 rpm, CMR, 256 MB cache, 180 TB/year workload rating
- 4 x 3.5-inch SATA 6 Gb/s hot-swappable drive bays (2.5-inch SATA SSDs also fit)
- Intel Celeron N5095 quad-core processor, burst up to 2.9 GHz, with AES-NI
- 8 GB DDR4 memory pre-installed, 16 GB maximum (2 x 8 GB)
- 2 x 2.5GbE ports (2.5G/1G/100M/10M)
- 2 x M.2 2280 PCIe Gen 3 x1 slots; SSD cache supported
- 1 x PCIe Gen 3 x2 slot for optional 5GbE/10GbE or QM2 cards
- 1 x HDMI 2.1 output, up to 4096 x 2160 at 60 Hz
- 2 x USB 3.2 Gen 2 (10 Gbps) Type-A and 2 x USB 2.0 ports
General
- USB: 2 USB ports
- Cellular: 5G
- Capacity: 16 TB
- Ethernet: 2.5GbE
- Part number: TS-464-8G+4XST4000VN006_UK
- Brand: QNAP
Storage
- Drive bays: 4 x 3.5-inch SATA 6 Gb/s (2.5-inch SATA SSD compatible)
- Drives included: 4 x Seagate IronWolf 4 TB (ST4000VN006)
- Raw capacity of included drives: 16 TB (4 x 4 TB), before RAID
- Hot-swappable bays: Yes (drive bays; M.2 SSDs are not hot-swappable)
- M.2 slots: 2 x M.2 2280 PCIe Gen 3 x1
- SSD cache acceleration: Supported
- RAID levels: QTS: JBOD, Single, RAID 0, 1, 5, 6, 10; QuTS hero: Single, RAID 0, 1, 5, 6, 10, Triple Mirror
- Expansion units supported: QNAP expansion units (QNAP names the TL-D1600S for this model; others per QNAP's compatibility list)
Hardware
- Processor: Intel Celeron N5095 quad-core/4-thread, burst up to 2.9 GHz (64-bit x86)
- Memory: 8 GB DDR4 SODIMM
- Maximum memory: 16 GB (2 x 8 GB)
- Memory slots: 2 x SODIMM DDR4
- Flash memory: 4 GB (dual boot OS protection)
- PCIe slots: 1 x PCIe Gen 3 x2
- Graphics: Intel UHD Graphics (hardware-accelerated transcoding supported)
- Hardware encryption engine: Yes (AES-NI)
Ports
- Ethernet ports: 2 x 2.5GbE RJ45 (2.5G/1G/100M/10M); 5GbE/10GbE optional via PCIe card
- USB ports: 2 x USB 3.2 Gen 2 Type-A (10 Gbps), 2 x USB 2.0
- HDMI: 1 x HDMI 2.1 (up to 4096 x 2160 @ 60 Hz)
Management
- Operating system: QTS (default); can be switched to QuTS hero
Power
- Power supply: External 90 W power adapter, 100-240 V
- Power consumption (operating, typical): 40.536 W
- Power consumption (disk standby): 21.618 W
Physical
- Form factor: Tower (desktop)
- Dimensions: 170 x 226.5 x 165 mm (W x D x H), excluding foot pads
- Weight: 2.26 kg (net)
- Fans: 1 x 120 mm, 12 V DC
Environment
- Operating temperature: 0 to 40 °C
- Storage temperature: -20 to 70 °C
- Relative humidity: 5 to 95% RH non-condensing (wet bulb 27 °C)
Warranty
- Manufacturer warranty: 3 years (QNAP standard warranty)
Included drives
- Drive model: Seagate IronWolf 4 TB NAS Hard Drive
- Drive part number: ST4000VN006
- Quantity: 4
- Capacity per drive: 4 TB
- Interface: SATA 6 Gb/s
- Form factor: 3.5-inch
- Spindle speed: 5,400 rpm
- Cache: 256 MB
- Recording technology: CMR
- Workload rating: 180 TB/year
- Drive warranty: 3 years limited
- TS-464 NAS unit
- Ethernet cable x 1
- Power cord x 1
- Flat head screw (for 3.5" HDD) x 12
- Flat head screw (for 2.5" HDD) x 12
- AC Adapter
- Quick installation guide
- 4 x Seagate IronWolf 4 TB NAS Hard Drive (ST4000VN006)
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
