Cisco
GLC-LH-SMD=Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Transceiver Module, 1310 nm, Duplex LC, 10 km SMF, DOM (GLC-LH-SMD=)
The Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Transceiver Module, 1310 nm, Duplex LC, 10 km SMF, DOM (GLC-LH-SMD=) is a genuine Cisco product, supplied new and boxed through official UK distribution. It is the pluggable module that gives a switch or router port its fibre or copper connection.
The Cisco GLC-LH-SMD is a 1000BASE-LX/LH SFP transceiver for Gigabit Ethernet over fibre. It is the usual choice for 1 Gbps uplinks between buildings, floors or cabinets where the run is too long for copper, and it fits the SFP uplink ports of Cisco switches and routers.
The module works at a nominal 1310 nm through a duplex LC connector. It reaches 10 km over single-mode fibre and 550 m over multimode fibre, where a mode-conditioning patch cord is needed. This part number is the version with digital optical monitoring (DOM) and the extended temperature rating of -5 to 85°C.
The module is hot-swappable. Support depends on the host platform and its software release, so the combination of this part number and the intended switch or router has to be checked in Cisco's Transceiver Module Group (TMG) Compatibility Matrix. Patch cords must have PC or UPC connectors; APC connectors are not supported.
Representative picture of Cisco Gigabit Ethernet SFP modules, shown with fibre leads plugged in. This listing is for one GLC-LH-SMD module, which has a duplex LC socket; the modules pictured are a different variant and the fibre leads are not included.
What the Cisco GLC-LH-SMD= is used for
- Gigabit fibre uplinks at 1 Gbps between buildings, floors or cabinets, reaching up to 10 km over single-mode fibre
- An SFP module for the SFP uplink ports of Cisco switches and routers, working at 1310 nm through a duplex LC connector
- Reusing multimode fibre for runs of up to 550 m, with a mode-conditioning patch cord
Cisco GLC-LH-SMD=: common questions
What fibre and connector does the GLC-LH-SMD use?
Single-mode fibre for up to 10 km, or multimode fibre for up to 550 m with a mode-conditioning patch cord. The connector is duplex LC; patch cords must be PC or UPC, and APC connectors are not supported.
Which switches is the GLC-LH-SMD compatible with?
It fits SFP ports on Cisco switches and routers, but support varies with the host platform and the software release it runs. The exact switch or router should be confirmed as supporting this part number before ordering.
Does this SFP support DOM?
Yes. Digital optical monitoring (DOM) is supported on this part number, which also carries the extended temperature rating of -5 to 85°C.
Are fibre leads included with the module?
No. The listing is for one GLC-LH-SMD module only; fibre leads are not included.
Is it hot swappable and what is the warranty?
Yes, the module is hot-swappable. It is covered by the Cisco standard warranty of 5 years.
See all Cisco products or SFP modules from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 1000BASE-LX/LH Gigabit Ethernet SFP, compatible with IEEE 802.3z 1000BASE-LX
- Duplex LC/PC connector, 1310 nm nominal wavelength
- Up to 10 km over single-mode fibre
- Up to 550 m over multimode fibre, using a mode-conditioning patch cord
- Digital optical monitoring (DOM) supported
- Extended operating temperature range: -5 to 85°C
- Hot-swappable; typical power draw up to 1 W per SFP port
- Platform support to be confirmed in Cisco's TMG Compatibility Matrix
General
- Ethernet: Gigabit
- Product type: Optical Gigabit Ethernet SFP transceiver module
- Form factor: SFP
- Data rate: 1 Gbps
- Ethernet standard: 1000BASE-LX/LH (compatible with IEEE 802.3z 1000BASE-LX)
- Hot-swappable: Yes
- Laser safety class: Class 1 (21 CFR 1040, IEC 60825-1)
- Part number: GLC-LH-SMD=
- Brand: Cisco
- EAN: 882658340901
Ports
- Connector: Dual LC/PC
- Cable type: Single-mode fibre (SMF) or multimode fibre (MMF)
- Wavelength: 1310 nm nominal (transmit and receive range 1270 to 1355 nm)
Performance
- Maximum distance (single-mode fibre): 10 km
- Maximum distance (multimode fibre): 550 m on 62.5 µm (500 MHz·km) or 50 µm (400 or 500 MHz·km) fibre; mode-conditioning patch cord required
- Minimum cabling distance: 2 m
- Transmit power: -3 dBm maximum, -9.5 dBm minimum
- Receive power: -3 dBm maximum, -20 dBm minimum
- Digital optical monitoring (DOM): Yes
Power
- Maximum power consumption: Up to 1 W per SFP port (typical for Cisco SFP modules)
Physical
- Dimensions (W x D x H): 13.4 x 56.5 x 8.5 mm
- Weight: 75 g or less (typical)
Environment
- Operating temperature: Extended (EXT): -5 to 85°C
- Storage temperature: -40 to 85°C
Compatibility
- Platform support: Depends on the host device and software release; check Cisco's Transceiver Module Group (TMG) Compatibility Matrix (tmgmatrix.cisco.com) for the switch or router in question
- Patch cords: PC or UPC connectors only; APC connectors are not supported
Warranty
- Manufacturer warranty: Cisco standard warranty: 5 years
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
