Cisco
MR36-HWCisco Meraki MR36 Wi-Fi 6 Indoor Access Point, 2x2:2 Dual-Band, Dedicated Scanning Radio (MR36-HW)
The Cisco Meraki MR36 Wi-Fi 6 Indoor Access Point, 2x2:2 Dual-Band, Dedicated Scanning Radio (MR36-HW) is a genuine Cisco product, supplied new and boxed through official UK distribution. It provides the Wi-Fi coverage that laptops, phones and wireless devices connect to.
The Cisco Meraki MR36 is a cloud-managed Wi-Fi 6 access point for indoor use in offices, schools, hospitals, shops and hotels. It suits general-purpose coverage where clients include laptops, phones, wireless VoIP handsets and video, and where the network is run remotely rather than from an on-site controller.
It is a dual-band 2x2:2 MU-MIMO 802.11ax access point with a combined frame rate of up to 1.5 Gbps (1,201 Mbps at 5 GHz and 286 Mbps at 2.4 GHz). A dedicated third radio provides full-time WIDS/WIPS, spectrum analysis and location analytics without taking airtime from clients, and a fourth radio adds Bluetooth Low Energy beaconing and scanning. It has one Gigabit Ethernet port and runs from standard 802.3af PoE.
Like all Meraki hardware, the MR36 is configured and monitored through the cloud-hosted Meraki dashboard and needs a valid Meraki access point licence to operate. The MR36-HW part number is the hardware only; the licence is purchased separately. It can also be powered from a 12 V DC adapter; the PoE injector and DC adapter are sold separately.
What the Cisco MR36-HW is used for
- General-purpose Wi-Fi 6 coverage in offices, schools, hospitals, shops and hotels, run remotely from the Meraki dashboard
- Serving laptops, phones, wireless VoIP handsets and video at a combined frame rate of up to 1.5 Gbps
- Full-time WIDS/WIPS, spectrum analysis and location analytics on a dedicated third radio, without taking airtime from clients
- Desktop, ceiling or wall mounting on one Gigabit Ethernet cable with standard 802.3af PoE
Cisco MR36-HW: common questions
Does the MR36-HW come with a Meraki licence?
No. MR36-HW is the hardware only. A valid Meraki access point licence is needed to operate it and is purchased separately.
What PoE does the Meraki MR36 need?
Standard IEEE 802.3af PoE, with a 15 W maximum. A 12 V DC input is the alternative; the DC adapter and PoE injector are sold separately.
Is the mounting kit included?
Yes. The box holds a mount cradle with a built-in level tool, a drop ceiling mount kit, wall screws, wall screw anchors and security screws.
What is the dedicated scanning radio for?
It is a third, dual-band radio that handles WIDS/WIPS, spectrum analysis and location analytics full time, so the two client radios are left to serve devices.
Is the MR36 an indoor or outdoor access point?
Indoor. Its operating temperature range is 0 °C to 40 °C, and it carries the lifetime hardware warranty with advanced replacement that applies to indoor access points.
See all Cisco products or wireless access points from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- Wi-Fi 6 (802.11ax) dual-band access point with 2x2:2 MU-MIMO on 2.4 GHz and 5 GHz
- Up to 1.5 Gbps aggregate frame rate: 1,201 Mbps at 5 GHz and 286 Mbps at 2.4 GHz
- Dedicated third radio for 24x7 WIDS/WIPS, spectrum analysis and location analytics
- Integrated Bluetooth Low Energy radio with Beacon and scanning support
- 1 x 10/100/1000BASE-T Ethernet port; 802.3af PoE, 15 W maximum; 12 V DC input option
- Internal antennas: 5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz
- WPA3-Personal, WPA3-Enterprise and WPA2 with 802.1X; Layer 7 firewall and guest isolation
- Desktop, ceiling and wall mounting with all standard mounting hardware included
- Cloud-managed through the Meraki dashboard with automatic firmware updates
- Lifetime hardware warranty with advanced replacement; Meraki licence required
General
- Power over Ethernet: PoE (802.3af)
- Product type: Cloud-managed indoor Wi-Fi 6 access point
- Licensing: Meraki access point licence required to operate (purchased separately; not included with the -HW hardware part number)
- Part number: MR36-HW
- Brand: Cisco
- EAN: 810979017042
Wireless
- Wi-Fi standard: Wi-Fi 6 (IEEE 802.11ax); also 802.11a/b/g/n/ac
- Frequency bands: 2.4 GHz and 5 GHz, concurrent
- Spatial streams: 2x2:2 MU-MIMO on both 2.4 GHz and 5 GHz (two spatial streams)
- Maximum data rate: 1.5 Gbps aggregate frame rate (1,201 Mbps at 5 GHz, 286 Mbps at 2.4 GHz)
- Channel widths: 20, 40 and 80 MHz (40 MHz supported in the 5 GHz band only)
- Modulation: Up to 1024-QAM on both 2.4 GHz and 5 GHz bands
- Wi-Fi 6 features: DL-OFDMA, UL-OFDMA, TWT, BSS Coloring, SU-MIMO, UL and DL MU-MIMO, beamforming, maximal ratio combining
- Client radios: 2.4 GHz 802.11b/g/n/ax and 5 GHz 802.11a/n/ac/ax client access radios; all four radios operate concurrently
- Scanning radio: Dedicated 2.4 GHz and 5 GHz dual-band radio for WIDS/WIPS, spectrum analysis and location analytics
- Bluetooth radio: 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support
- Antenna: Internal; 5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz
Ports
- Ethernet ports: 1 x 10/100/1000BASE-T (RJ45)
- Additional ports: 1 x DC power connector (5.5 mm x 2.5 mm, centre positive)
Power
- PoE requirement: IEEE 802.3af PoE, 37 - 57 V
- Power consumption: 15 W maximum (802.3af)
- Alternative power: 12 V DC input (DC adapter and PoE injector sold separately)
Security
- Encryption and authentication: WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3-Personal, WPA3-Enterprise, WPA3-Enhanced Open (OWE); TKIP and AES encryption; EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
- Wireless intrusion detection: Real-time WIDS/WIPS with alerting and automatic rogue AP containment (Air Marshal) on the dedicated scanning radio
- Firewall and policy: Integrated Layer 7 firewall with mobile device policy management; guest access with device isolation; 802.1Q VLAN tagging; PCI compliance reporting
Management
- Management: Cloud-managed through the Cisco Meraki dashboard; self-configuring; automatic firmware updates
- Quality of service: WMM access categories with DSCP and 802.1p; U-APSD power save; Layer 7 application traffic identification and shaping
- Roaming: PMK, OKC and 802.11r for fast Layer 2 roaming; distributed or centralised Layer 3 roaming
Physical
- Dimensions (W x D x H): 250 x 120 x 36 mm (not including desk mount feet or mount plate)
- Weight: 0.492 kg
- Mounting: Desktop, ceiling and wall mount; ceiling tile rail (9/16, 15/16 or 1 1/2 in flush or recessed rails) and cable junction boxes; mounting hardware included
- Physical security: Two security screw options (included); Kensington lock hard point; concealed mount plate with anti-tamper cable bay
Environment
- Operating temperature: 0 °C to 40 °C
- Humidity: 5 to 95% non-condensing
- Operating altitude: Up to 12,192 m (40,000 ft)
- MTBF: 257,215 hours at +25 °C
Warranty
- Manufacturer warranty: Lifetime hardware warranty with advanced replacement included (indoor access point)
- MR36 cloud-managed access point
- Mount cradle with built-in level tool
- Drop ceiling mount kit
- Wall screws, wall screw anchors and security screws
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
