Cisco
CW9172I-CFGCisco Wireless 9172I Wi-Fi 7 Access Point, Tri-Band 2x2:2, 2.5G mGig, Global Use (CW9172I-CFG)
The Cisco Wireless 9172I Wi-Fi 7 Access Point, Tri-Band 2x2:2, 2.5G mGig, Global Use (CW9172I-CFG) is a genuine Cisco product, supplied new and boxed through official UK distribution. It provides the Wi-Fi coverage that laptops, phones and wireless devices connect to.
The Cisco Wireless 9172I is a Wi-Fi 7 (802.11be) indoor access point for sites with low to moderate device density, such as branch offices, retail stores, healthcare clinics, student housing and small hotels. It is a compact ceiling unit with internal omnidirectional antennas.
It can run as a tri-radio access point with 2x2 radios on 2.4, 5 and 6 GHz (six spatial streams, PHY data rates up to 9 Gbps), or as a dual-radio unit with 2x2 on 2.4 GHz and 4x4 on 5 GHz when 6 GHz is disabled (up to 6.0 Gbps). The uplink is 2.5 Gbps multigigabit Ethernet. Both radio configurations run on 802.3at PoE+ (25.5 W maximum at the device); a USB 2.0 port and an integrated BLE and 802.15.4 IoT radio are included.
This is a Cisco "global use" access point: the part number carries no regulatory domain and no management mode. At first start-up the unit works out its location and whether it is managed by a Catalyst 9800 controller or the Meraki dashboard, and it can be moved between the two later. "-CFG" is Cisco's Configurable ordering option, where mounting accessories and packaging are chosen at order. A Cisco Networking Subscription with Wireless Essentials or Advantage licences is required in either mode.
What the Cisco CW9172I-CFG is used for
- Wi-Fi 7 access point for branch offices, retail stores, healthcare clinics, student housing and small hotels with low to moderate device density
- Tri-radio service on 2.4, 5 and 6 GHz at PHY data rates up to 9 Gbps, or 2.4 GHz with a 4x4 5 GHz radio where 6 GHz is disabled
- Ceiling or wall mounting on a 2.5 Gbps multigigabit uplink, with either radio configuration running from 802.3at PoE+
- Deploying one global part number under a Catalyst 9800 controller or the Meraki dashboard
Cisco CW9172I-CFG: common questions
What PoE does the CW9172I-CFG need?
802.3at PoE+ runs either radio configuration with a 2.5G link, at up to 25.5 W at the device; typical consumption is 12.2 W in tri-radio mode. On 802.3af only the 2.4 GHz radio runs, at 1x1.
Does the 9172I need a subscription?
Yes. It requires a Cisco Networking Subscription with Cisco Wireless Essentials or Advantage licences in either management mode, and an active licence is required for full functionality.
Can it be managed from the Meraki dashboard?
Yes. It can be managed by the Cisco Meraki dashboard or by a Catalyst 9800 Series wireless controller. It discovers its management mode at first start-up and can be migrated later.
Is a power supply in the box?
No. The box holds the access point with the mounting bracket and ceiling-rail clip chosen at order. The 54 V power supply MA-PWR-50WAC for the DC power jack is sold separately.
What does global use mean for this model?
Neither a regulatory domain nor a management mode is fixed in the part number. Both are determined at onboarding, when the unit works out its location and how it is managed.
See all Cisco products or wireless access points from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- Wi-Fi 7 (802.11be) with 4096-QAM, Multi-Link Operation, preamble puncturing and OFDMA
- Tri-radio: 2x2:2 on 2.4, 5 and 6 GHz (six spatial streams), PHY data rates up to 9 Gbps
- Alternative dual-radio mode: 2.4 GHz 2x2:2 with 5 GHz 4x4:4 when 6 GHz is disabled, up to 6.0 Gbps
- 6 GHz channels up to 320 MHz wide; 5 GHz up to 160 MHz
- 1 x 100M/1000M/2.5G multigigabit Ethernet uplink, RJ-45 console port and USB 2.0 (4.5 W)
- 802.3at PoE+ runs either radio configuration, 25.5 W maximum at the device; 802.3bt class 5 up to 32 W
- Typical power consumption 12.2 W (±4 W) tri-radio, 11.2 W (±4 W) dual-radio, on 802.3at
- Integrated BLE and 802.15.4 IoT radio; dedicated scanning radio
- Global use: regulatory domain and management mode (Catalyst 9800 or Meraki) set at onboarding
- Requires a Cisco Networking Subscription; limited lifetime hardware warranty
General
- Wi-Fi standard: Wi-Fi 7 (802.11be)
- Power over Ethernet: PoE++ (802.3bt)
- Cellular: 5G
- Product type: Indoor access point with internal omnidirectional antennas
- Wi-Fi generation: Wi-Fi 7 (802.11be)
- Part number suffix: Global-use access point: the part number carries no regulatory domain or management mode; both are determined at onboarding. -CFG is Cisco's "Configurable" ordering option, with accessories and packaging chosen at order.
- Management mode as shipped: Not fixed: management mode (Catalyst or Meraki) and regulatory settings are determined at onboarding
- Licensing: Requires a Cisco Networking Subscription with Cisco Wireless Essentials or Advantage licences, whichever management mode is used. Cisco states an active licence is required for full functionality.
- Part number: CW9172I-CFG
- Brand: Cisco
- EAN: 889728643115
Wireless
- Wi-Fi standards: IEEE 802.11a/b/g/n/ac/ax/be
- Frequency bands: 2.4 GHz, 5 GHz and 6 GHz
- Radios and spatial streams: Tri-radio: 2.4 GHz, 5 GHz and 6 GHz, all 2x2:2 (six spatial streams); or dual-radio: 2.4 GHz 2x2:2 and 5 GHz 4x4:4 with 6 GHz disabled; plus a dedicated scan radio
- Maximum data rate: PHY data rates up to 9 Gbps (2x2 320 MHz on 6 GHz, 2x2 160 MHz on 5 GHz, 2x2 20 MHz on 2.4 GHz), or up to 6.0 Gbps in dual-radio mode (4x4 160 MHz on 5 GHz)
- Channel widths: 6 GHz: 20, 40, 80, 160 and 320 MHz; 5 GHz: 20, 40, 80 and 160 MHz; 2.4 GHz: 20 MHz
- Antennas: Internal, omnidirectional in azimuth; peak gain 4 dBi (2.4 GHz), 5.5 dBi (5 GHz), 6 dBi (6 GHz) and 2 dBi (IoT)
- Bluetooth / IoT radio: Integrated IoT radio with Bluetooth Low Energy (listed by Cisco as BLE 6) and 802.15.4
- Maximum transmit power: 23 dBm (200 mW) on each of the 2.4, 5 and 6 GHz bands
- 6 GHz operation: Where 6 GHz use is not permitted or not yet supported in software, the 6 GHz radio is disabled
Ports
- Ethernet uplink: 1 x 100M/1000M/2.5G multigigabit Ethernet (RJ-45)
- Console port: RJ-45 management console port, default speed 115200 bps
- USB: 1 x USB 2.0, 4.5 W
Power
- PoE requirement: 802.3at PoE+ for full radio operation (tri-radio 2x2, or 2.4 GHz 2x2 with 5 GHz 4x4), 2.5G link; 802.3bt class 5 (Cisco UPOE) also supported
- Power draw: Maximum at the device: 25.5 W on 802.3at, 32 W on 802.3bt class 5. On 802.3at: tri-radio 10.7 W ±2 W idle, 12.2 W ±4 W typical; dual-radio 10.3 W ±2 W idle, 11.2 W ±4 W typical
- Reduced-power operation: On 802.3af (12.95 W) the data sheet lists the 2.4 GHz radio at 1x1 only, a 1G uplink and USB off
- Other power options: DC power jack (54 V power supply MA-PWR-50WAC, sold separately) or a Cisco power injector
Management
- Management options: Cisco Catalyst 9800 Series wireless controller (on-premises), Cisco Meraki dashboard (cloud) or hybrid; the unit discovers its management mode at first start-up and can be migrated later
- Supported controllers: Cisco Catalyst 9800 Series wireless controllers (physical or virtual); Catalyst 9000 switches with Embedded Wireless Controller in SD-Access mode
- Minimum software: Cisco IOS XE 17.15.2b or later
Security
- Wireless security: WPA3, WPA2 (802.11i), 802.1X, Enhanced Open (OWE), AES with GCMP-128, GCMP-256 and CCMP-256
- Platform security: Image signing, Secure Boot and the Cisco Trust Anchor module
- Certifications: Wi-Fi Alliance: Wi-Fi 7 (R1), Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security
Physical
- Dimensions (W x D x H): 200 x 200 x 53 mm (20 x 20 x 5.3 cm), without mounting bracket
- Weight: 0.874 kg (874 g)
- Mounting: Suspended ceiling, hard ceiling, wall, electrical or network box, or above a suspended ceiling; bracket AIR-AP-BRACKET-1 or AIR-AP-BRACKET-2
Environment
- Operating temperature: 0 to 50°C; performance derated from 40 to 50°C
- Storage temperature: -40 to 70°C
- Operating humidity: 0% to 95% (non-condensing)
Warranty
- Manufacturer warranty: Cisco limited lifetime hardware warranty, for as long as the original end user owns or uses the product; 5-day advance hardware replacement; software media warranted for 90 days.
- Cisco Wireless 9172I access point
- Mounting bracket and ceiling-rail clip as chosen at order (Cisco defaults: AIR-AP-BRACKET-1= and AIR-AP-T-RAIL-R)
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
