Cisco
QSFP-100G-LR-S=Cisco QSFP-100G-LR-S 100GBASE-LR1 QSFP Transceiver Module, 1310 nm SMF, Duplex LC, 10 km (QSFP-100G-LR-S=)
The Cisco QSFP-100G-LR-S 100GBASE-LR1 QSFP Transceiver Module, 1310 nm SMF, Duplex LC, 10 km (QSFP-100G-LR-S=) is a genuine Cisco product, supplied new and boxed through official UK distribution. It is the pluggable module that gives a switch or router port its fibre or copper connection.
The Cisco QSFP-100G-LR-S is a 100GBASE-LR1 QSFP optical transceiver for 100 Gigabit Ethernet over single-mode fibre. It is used for longer 100G links, such as connections between buildings, data halls or sites, from the QSFP port of a Cisco switch or router.
It supports link lengths of up to 10 km over a standard pair of G.652 single-mode fibres with duplex LC connectors. The 100G signal is carried on a single wavelength using onboard PAM4 modulation and FEC, in line with IEEE 802.3 100GBASE-LR1. This is a different interface from 100GBASE-LR4, which Cisco sells as the QSFP-100G-LR4-S and which uses four wavelengths. Power consumption is 4.0 W.
The module is hot-swappable. Support depends on the host platform and its software release, so the combination of this part number and the intended switch or router has to be checked in Cisco's Transceiver Module Group (TMG) Compatibility Matrix. Cisco also publishes an interoperability matrix for module-to-module combinations. Patch cords must have PC or UPC connectors.
Representative picture of a Cisco 100G QSFP28 transceiver module with a duplex LC connector; the module shown is Cisco's 100G QSFP28 DR module. This listing is for the QSFP-100G-LR-S, which has the same QSFP28 body and connector but may have a different colour pull-tab.
What the Cisco QSFP-100G-LR-S= is used for
- 100 Gigabit Ethernet links of up to 10 km between buildings, data halls or sites over single-mode fibre
- Running 100G over a standard pair of G.652 single-mode fibres with duplex LC connectors, on a single 1310 nm wavelength
- Adding a 100GBASE-LR1 optic to the QSFP port of a Cisco switch or router
Cisco QSFP-100G-LR-S=: common questions
What fibre and connector does the QSFP-100G-LR-S need?
A pair of standard G.652 single-mode fibres terminated in duplex LC connectors. Use patch cords with PC or UPC connectors.
Is the QSFP-100G-LR-S the same as 100GBASE-LR4?
No. It is a 100GBASE-LR1 module that carries 100G on a single wavelength using PAM4 modulation and FEC. 100GBASE-LR4 uses four wavelengths and is sold by Cisco as the QSFP-100G-LR4-S.
How far can it reach?
Up to 10 km over single-mode fibre, at a nominal wavelength of 1310 nm.
How much power does the module use?
4.0 W. It is hot-swappable and rated for the commercial temperature range of 0 to 70°C.
Which Cisco switches support it?
Support depends on the host switch or router and its software release, so the intended device should be confirmed as supporting this part number before ordering.
See all Cisco products or SFP modules from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 100GBASE-LR1 100 Gigabit Ethernet on a single wavelength, with onboard PAM4 modulation and FEC
- Duplex LC connector for single-mode fibre (G.652)
- Link length up to 10 km
- 1310 nm nominal wavelength (1304.5 to 1317.5 nm)
- Compliant with IEEE 802.3 100GBASE-LR1; not the four-wavelength 100GBASE-LR4 interface
- Power consumption 4.0 W
- Commercial operating temperature range: 0 to 70°C
- Platform support to be confirmed in Cisco's TMG Compatibility Matrix
General
- Ethernet: 100GbE
- Product type: Optical 100 Gigabit Ethernet QSFP transceiver module
- Form factor: QSFP (QSFP28, SFF-8665)
- Data rate: 100 Gbps
- Ethernet standard: 100GBASE-LR1 (IEEE 802.3)
- Hot-swappable: Yes
- Laser safety class: Class 1
- Part number: QSFP-100G-LR-S=
- Brand: Cisco
- EAN: 889728245012
Ports
- Connector: Duplex LC
- Cable type: Single-mode fibre (SMF), G.652
- Wavelength: 1310 nm nominal (range 1304.5 to 1317.5 nm)
Performance
- Maximum distance (single-mode fibre): 10 km
- FEC requirement: Onboard PAM4 modulation and FEC
- Transmit power: 4.5 dBm maximum, -1.4 dBm minimum
- Receive power: 4.5 dBm maximum, -7.7 dBm minimum
- Management interface: SFF-8636 Common Management Interface
Power
- Maximum power consumption: 4.0 W
Physical
- Dimensions (W x D x H): 18.4 x 72.4 x 13.5 mm (maximum outer dimensions)
- Weight: 100 g or less (typical)
- Pull tab colour: Blue
Environment
- Operating temperature: Commercial: 0 to 70°C
- Storage temperature: -40 to 85°C
Compatibility
- Platform support: Depends on the host device and software release; check Cisco's Transceiver Module Group (TMG) Compatibility Matrix (tmgmatrix.cisco.com) for the switch or router in question
- Patch cords: PC or UPC connectors only
Warranty
- Manufacturer warranty: Cisco standard warranty: 5 years
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
