Cisco QSFP-40G-SR4=

Cisco QSFP-40G-SR4 40GBASE-SR4 QSFP Transceiver Module, 850 nm MMF, MPO-12, 100 m OM3 / 150 m OM4 (QSFP-40G-SR4=)

Exc VAT £1,190.00
Inc VAT £1,428.00
4Low stock
Buying for a project? Volume pricing and stock allocation 0333 242 1314 · sales@clisecure.com Get a quote
Form factorQSFP
Data rate40 Gbps
Wavelength850 nm

The Cisco QSFP-40G-SR4 40GBASE-SR4 QSFP Transceiver Module, 850 nm MMF, MPO-12, 100 m OM3 / 150 m OM4 (QSFP-40G-SR4=) is a genuine Cisco product, supplied new and boxed through official UK distribution. It is the pluggable module that gives a switch or router port its fibre or copper connection.

The Cisco QSFP-40G-SR4 is a 40GBASE-SR4 QSFP optical transceiver for short-reach 40 Gigabit Ethernet over multimode fibre. It is used for 40G links between data centre and core switches over 12-fibre parallel cabling terminated with MPO/MTP connectors.

The module uses four lanes at 850 nm and supports link lengths of 100 m on OM3 and 150 m on OM4 or OM5 multimode fibre. It can also run in 4x10G breakout mode, using a 12-fibre to duplex breakout cable, to interoperate with 10GBASE-SR interfaces and with the SFP-10/25G-CSR-S in 10G mode. That is the difference from the S-Class QSFP-40G-SR4-S, which has the same reach but, per Cisco's data sheet, supports neither 4x10G breakout nor FCoE.

The module is hot-swappable. Support depends on the host platform and its software release, so the combination of this part number and the intended switch or router has to be checked in Cisco's Transceiver Module Group (TMG) Compatibility Matrix. Patch cords must have PC or UPC connectors.

Representative pictures of Cisco QSFP transceiver modules: the first shows a single Cisco 40G QSFP module, the second a row of eight QSFP modules of different types. This listing is for one QSFP-40G-SR4, which has an MPO-12 connector; its pull-tab colour may differ from those shown.

What the Cisco QSFP-40G-SR4= is used for

  • Linking data centre and core switches at 40G over 12-fibre parallel multimode cabling with MPO/MTP connectors
  • Splitting one 40G port into 4 x 10G links to 10GBASE-SR interfaces, using a 12-fibre to duplex breakout cable
  • Short runs of up to 100 m on OM3 and 150 m on OM4 or OM5 multimode fibre, at 850 nm

Cisco QSFP-40G-SR4=: common questions

Does the QSFP-40G-SR4 support 4x10G breakout?

Yes. It can run in 4x10G breakout mode with a 12-fibre to duplex breakout cable, to interoperate with 10GBASE-SR interfaces and with the SFP-10/25G-CSR-S in 10G mode.

What is the difference between the QSFP-40G-SR4 and QSFP-40G-SR4-S?

Reach is the same. Per Cisco's data sheet the S-Class QSFP-40G-SR4-S supports neither 4x10G breakout nor FCoE, whereas this part does support 4x10G breakout.

How far does it reach on OM3 and OM4?

100 m on OM3 and 150 m on OM4 or OM5, with 30 m on OM2. The OM4 and OM5 distances are treated as engineered links with a maximum 1 dB loss budget.

What connector does it have?

An MPO-12 connector for 12-fibre MPO/MTP parallel multimode cabling. Use patch cords with PC or UPC connectors.

How much power does the module draw?

1.5 W at most. It is hot-swappable and rated for the commercial temperature range of 0 to 70°C.

Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.

  • 40GBASE-SR4 40 Gigabit Ethernet in the QSFP form factor: four lanes at 850 nm
  • MPO-12 connector for 12-fibre parallel multimode cabling
  • 100 m on OM3; 150 m on OM4 and OM5; 30 m on OM2
  • 4x10G breakout mode for interoperability with 10GBASE-SR (not offered by QSFP-40G-SR4-S)
  • Power consumption 1.5 W
  • Commercial operating temperature range: 0 to 70°C
  • Hot-swappable; high-speed electrical interface compliant with IEEE 802.3ba
  • Platform support to be confirmed in Cisco's TMG Compatibility Matrix

General

  • Ethernet: 40GbE
  • Product type: Optical 40 Gigabit Ethernet QSFP transceiver module
  • Form factor: QSFP (QSFP+ MSA SFF-8436)
  • Data rate: 40 Gbps (4 lanes); 4 x 10 Gbps in breakout mode
  • Ethernet standard: 40GBASE-SR4 (IEEE 802.3ba)
  • Hot-swappable: Yes
  • Laser safety class: Class 1M
  • Part number: QSFP-40G-SR4=
  • Brand: Cisco
  • EAN: 882658439759

Ports

  • Connector: MPO-12 (12-fibre MPO/MTP)
  • Cable type: Multimode fibre (MMF), 50 µm core, 12-fibre parallel
  • Wavelength: 850 nm (range 840 to 860 nm)

Performance

  • Maximum distance (OM3): 100 m (2000 MHz·km)
  • Maximum distance (OM4): 150 m (4700 MHz·km); treated as an engineered link with a maximum 1 dB loss budget
  • Maximum distance (OM5): 150 m (4700 MHz·km); treated as an engineered link with a maximum 1 dB loss budget
  • Maximum distance (OM2): 30 m (500 MHz·km)
  • Minimum cabling distance: 0.5 m
  • Transmit power: -1 dBm maximum, -7.6 dBm minimum, per lane (version -01 allows +1 dBm maximum per lane)
  • Receive power: 2.4 dBm maximum, -9.5 dBm minimum, per lane
  • Management interface: 2-wire I2C communication interface compliant with SFF-8436

Power

  • Maximum power consumption: 1.5 W

Physical

  • Dimensions (W x D x H): 18.4 x 72.4 x 13.5 mm (maximum outer dimensions)
  • Weight: 100 g or less (typical)
  • Pull tab colour: Beige

Environment

  • Operating temperature: Commercial: 0 to 70°C
  • Storage temperature: -40 to 85°C

Compatibility

  • Platform support: Depends on the host device and software release; check Cisco's Transceiver Module Group (TMG) Compatibility Matrix (tmgmatrix.cisco.com) for the switch or router in question
  • Patch cords: PC or UPC connectors only
  • Breakout: 4x10G breakout mode supported, for interoperability with 10GBASE-SR and SFP-10/25G-CSR-S (in 10G mode); the QSFP-40G-SR4-S does not support 4x10G breakout

Warranty

  • Manufacturer warranty: Cisco standard warranty: 5 years

UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.

Cisco QSFP-40G-SR4 40GBASE-SR4 QSFP Transceiver Module, 850 nm MMF, MPO-12, 100 m OM3 / 150 m OM4 (QSFP-40G-SR4=) - Cisco 40G QSFP transceiver module (representative picture)
Cisco QSFP-40G-SR4 40GBASE-SR4 QSFP Transceiver Module, 850 nm MMF, MPO-12, 100 m OM3 / 150 m OM4 (QSFP-40G-SR4=) £1,190.00 Exc VAT · Low stock
Trade pricing availableNext-day UK dispatchGenuine UK stockProject quote supportSecure checkoutExpert pre-sales advice

Customer reviews

★ We're on Trustpilot Bought from us? An honest review helps other installers and IT teams choose. Review us on Trustpilot

Built for B2B buying

From product selection to deployment, this is made for real projects.

Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.

1Check compatibility
2Choose fulfilment
3Deploy with support
Trade quote ready Send your basket for quantity pricing and project supply checks.
Same basket support Add licences, mounts, switches, storage or accessories with confidence.
Cisco QSFP-40G-SR4 40GBASE-SR4 QSFP Transceiver Module, 850 nm MMF, MPO-12, 100 m OM3 / 150 m OM4 (QSFP-40G-SR4=) - Cisco 40G QSFP transceiver module (representative picture)
Need fit advice? Ask before checkout and avoid wrong-spec purchases.

Why choose us

Procurement that feels fast, clear and trade-ready.

Every product page is designed to help you move from shortlist to checkout with fewer unknowns.

Genuine UK stock New, boxed products sourced through official UK distribution.
Project help Ask for fit checks, renewal advice and quantity pricing.
Fast dispatch Choose UK delivery options for urgent deployments.
Secure checkout Order online or speak to the team for larger baskets.

Common questions

Product and order FAQs

Can I request trade or bulk pricing?

Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.

How quickly can this be delivered?

Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.

Can you help confirm compatibility?

Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.

Do you supply renewals and supporting accessories?

CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.