Cisco
SFP-10G-SR-S=Cisco SFP-10G-SR-S 10GBASE-SR SFP+ S-Class Transceiver Module, 850 nm MMF, Duplex LC, 400 m OM4 (SFP-10G-SR-S=)
The Cisco SFP-10G-SR-S 10GBASE-SR SFP+ S-Class Transceiver Module, 850 nm MMF, Duplex LC, 400 m OM4 (SFP-10G-SR-S=) is a genuine Cisco product, supplied new and boxed through official UK distribution. It is the pluggable module that gives a switch or router port its fibre or copper connection.
The Cisco SFP-10G-SR-S is the S-Class 10GBASE-SR SFP+ optical transceiver for short-reach 10 Gigabit Ethernet over multimode fibre. It suits Ethernet uplinks between access and core switches, server connections and links between nearby racks, plugged into the SFP+ port of a Cisco switch or router.
It transmits at 850 nm over duplex LC multimode fibre and reaches 300 m on OM3 and 400 m on OM4 or OM5, with shorter spans on older grades (82 m on OM2, 33 m on OM1, 26 m on FDDI-grade fibre). It is rated for 0 to 70°C and draws up to 1 W. The reach and optical figures are the same as the SFP-10G-SR; the difference Cisco's data sheet states for the S-Class part is that it does not support FCoE.
The module is hot-swappable. Support depends on the host platform and its software release, so the combination of this part number and the intended switch or router has to be checked in Cisco's Transceiver Module Group (TMG) Compatibility Matrix. Patch cords must have PC or UPC connectors; APC connectors are not supported.
The picture shows a range of Cisco transceiver modules of different types and sizes, some with fibre leads attached. This listing is for one SFP-10G-SR-S module (SFP+, duplex LC connector); no cables are included.
What the Cisco SFP-10G-SR-S= is used for
- Short-reach 10 Gigabit Ethernet uplinks between access and core switches over multimode fibre
- Server connections and links between nearby racks, reaching 300 m on OM3 and 400 m on OM4 or OM5
- An SFP+ module for the SFP+ port of a Cisco switch or router, at 850 nm on a duplex LC connector
Cisco SFP-10G-SR-S=: common questions
How far does the SFP-10G-SR-S reach?
300 m on OM3 and 400 m on OM4 or OM5. On older grades it reaches 82 m on OM2, 33 m on OM1 and 26 m on FDDI-grade fibre.
What is the difference between the SFP-10G-SR-S and the SFP-10G-SR?
Only FCoE support. Both reach the same distances with the same optical figures, but Cisco's data sheet marks the S-Class SFP-10G-SR-S as not supporting FCoE.
Which fibre and connector does it use?
Multimode fibre with a duplex LC connector, at 850 nm. Patch cords must be PC or UPC; APC connectors are not supported.
Is digital optical monitoring available?
Yes. DOM is supported; it is listed as a feature of Cisco SFP+ modules.
Are cables included with the module?
No. The listing is for one SFP-10G-SR-S module and no cables are included.
See all Cisco products or SFP modules from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 10GBASE-SR 10 Gigabit Ethernet in the SFP+ form factor, S-Class part
- 850 nm over multimode fibre with a duplex LC/PC connector
- 300 m on OM3; 400 m on OM4 and OM5
- 82 m on OM2, 33 m on OM1, 26 m on FDDI-grade multimode fibre
- Commercial operating temperature range: 0 to 70°C
- Maximum power consumption 1 W; hot-swappable
- Digital optical monitoring capability
- S-Class: no FCoE support, per Cisco's data sheet
- Platform support to be confirmed in Cisco's TMG Compatibility Matrix
General
- Ethernet: 10GbE
- Product type: Optical 10 Gigabit Ethernet SFP+ transceiver module
- Form factor: SFP+
- Data rate: 10 Gbps
- Ethernet standard: 10GBASE-SR (IEEE 802.3 10 Gigabit Ethernet)
- Hot-swappable: Yes
- Laser safety class: Class 1 (21 CFR 1040, IEC 60825-1)
- Part number: SFP-10G-SR-S=
- Brand: Cisco
- EAN: 882658782466
Ports
- Connector: Dual LC/PC
- Cable type: Multimode fibre (MMF)
- Wavelength: 850 nm (transmit and receive range 840 to 860 nm)
Performance
- Maximum distance (OM3): 300 m (50 µm, 2000 MHz·km)
- Maximum distance (OM4): 400 m (50 µm, 4700 MHz·km)
- Maximum distance (OM5): 400 m (50 µm, 4700 MHz·km)
- Maximum distance (OM2): 82 m (50 µm, 500 MHz·km); 66 m on 50 µm, 400 MHz·km fibre
- Maximum distance (OM1): 33 m (62.5 µm, 200 MHz·km)
- Maximum distance (FDDI-grade MMF): 26 m (62.5 µm, 160 MHz·km)
- Minimum cabling distance: 2 m
- Transmit power: -1.2 dBm maximum, -7.3 dBm minimum
- Receive power: -1.0 dBm maximum, -9.9 dBm minimum
- Digital optical monitoring (DOM): Supported (listed as a feature of Cisco SFP+ modules)
Power
- Maximum power consumption: 1 W
Physical
- Dimensions (W x D x H): 13.4 x 56.5 x 8.5 mm
- Weight: 75 g or less (typical)
- Bail latch colour: Beige
Environment
- Operating temperature: Commercial (COM): 0 to 70°C
- Storage temperature: -40 to 85°C
Compatibility
- Platform support: Depends on the host device and software release; check Cisco's Transceiver Module Group (TMG) Compatibility Matrix (tmgmatrix.cisco.com) for the switch or router in question
- Patch cords: PC or UPC connectors only; APC connectors are not supported
- Fibre Channel over Ethernet (FCoE): Not supported on this S-Class part
Warranty
- Manufacturer warranty: Cisco standard warranty: 5 years
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
