Cisco
SFP-10G-T-X=Cisco SFP-10G-T-X 10GBASE-T SFP+ Transceiver Module, RJ-45, 100M/1G/10G, 30 m at 10G on Cat6A (SFP-10G-T-X=)
The Cisco SFP-10G-T-X 10GBASE-T SFP+ Transceiver Module, RJ-45, 100M/1G/10G, 30 m at 10G on Cat6A (SFP-10G-T-X=) is a genuine Cisco product, supplied new and boxed through official UK distribution. It is the pluggable module that gives a switch or router port its fibre or copper connection.
The Cisco SFP-10G-T-X is a 10GBASE-T copper transceiver in the SFP+ form factor. It gives an SFP+ port an RJ-45 interface so that it can connect over twisted-pair cabling to servers, storage, access points or other devices that have built-in 10GBASE-T ports, within a rack or across adjacent racks.
The module supports data rates of 100 Mbps, 1 Gbps and 10 Gbps. At 10 Gbps it reaches up to 30 m and needs Cat6A or Cat7 cabling; at 100 Mbps and 1 Gbps it reaches up to 100 m on Cat5e, Cat6A or Cat7. Power consumption is 2.5 W at 10 Gbps and 1.5 W at the lower speeds, and the module carries the extended temperature rating of -5 to 85°C.
The module is hot-swappable. Support depends on the host platform and its software release, so the combination of this part number and the intended switch or router has to be checked in Cisco's Transceiver Module Group (TMG) Compatibility Matrix. At 2.5 W it draws more power than the 1 W optical SR and LR SFP+ modules.
The picture shows the Cisco SFP-10G-T-X module (left) next to Cat6A/Cat7 network cables. The cables are there for illustration only and are not included.
What the Cisco SFP-10G-T-X= is used for
- Giving an SFP+ port an RJ-45 interface to reach servers, storage or access points with built-in 10GBASE-T ports
- 10 Gbps copper links of up to 30 m on Cat6A or Cat7 cabling, within a rack or across adjacent racks
- An SFP+ module that also runs at 100 Mbps and 1 Gbps, for up to 100 m on Cat5e, Cat6A or Cat7
Cisco SFP-10G-T-X=: common questions
How far does the SFP-10G-T-X reach at 10G?
Up to 30 m at 10 Gbps, on Cat6A or Cat7 cabling. The 100 Mbps and 1 Gbps rates run for up to 100 m on Cat5e, Cat6A or Cat7.
Does the SFP-10G-T-X support 1G and 100M?
Yes. Besides 10 Gbps it also runs at 100 Mbps and 1 Gbps.
How much power does it draw?
2.5 W at 10 Gbps and 1.5 W at 100 Mbps or 1 Gbps. That is above the 1 W drawn by optical SR and LR SFP+ modules.
Are network cables included?
No. The cables in the picture are for illustration only and are not included.
Will it work in any SFP+ port?
Not necessarily. Support varies with the host platform and the software release it runs, so the intended switch or router should be confirmed as supporting this part number before ordering.
See all Cisco products or SFP modules from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 10GBASE-T copper connectivity in the SFP+ form factor
- RJ-45 interface; data rates of 100 Mbps, 1 Gbps and 10 Gbps
- Up to 30 m at 10 Gbps on Cat6A/Cat7 or better cabling
- Up to 100 m at 100 Mbps and 1 Gbps on Cat5e/Cat6A/Cat7 or better cabling
- Power consumption 2.5 W at 10 Gbps, 1.5 W at 100 Mbps/1 Gbps
- Extended operating temperature range: -5 to 85°C
- Hot-swappable
- Platform support to be confirmed in Cisco's TMG Compatibility Matrix
General
- Product type: Copper 10 Gigabit Ethernet SFP+ transceiver module
- Form factor: SFP+
- Data rate: 100 Mbps, 1 Gbps and 10 Gbps
- Ethernet standard: 10GBASE-T
- Hot-swappable: Yes
- Part number: SFP-10G-T-X=
- Brand: Cisco
- EAN: 889728117593
Ports
- Connector: RJ-45
- Cable type: Twisted-pair copper: Cat6A/Cat7 or better at 10 Gbps; Cat5e/Cat6A/Cat7 or better at 100 Mbps/1 Gbps
Performance
- Maximum distance (10 Gbps): 30 m on Cat6A/Cat7 or better
- Maximum distance (100 Mbps/1 Gbps): 100 m on Cat5e/Cat6A/Cat7 or better
- Digital optical monitoring (DOM): Not applicable to this copper module
Power
- Maximum power consumption: 2.5 W at 10 Gbps; 1.5 W at 100 Mbps/1 Gbps
Physical
- Dimensions (W x D x H): 13.4 x 56.5 x 8.5 mm
- Weight: 75 g or less (typical)
- Bail latch colour: Golden/Yellow
Environment
- Operating temperature: Extended (EXT): -5 to 85°C
- Storage temperature: -40 to 85°C
Compatibility
- Platform support: Depends on the host device and software release; check Cisco's Transceiver Module Group (TMG) Compatibility Matrix (tmgmatrix.cisco.com) for the switch or router in question
Warranty
- Manufacturer warranty: Cisco standard warranty: 5 years
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
