D-Link
DAP-E9560D-Link DAP-E9560 BE9500 Tri-Band Wi-Fi 7 Ceiling Mount Access Point, 10G PoE and 2.5G Ports (DAP-E9560)
The D-Link DAP-E9560 BE9500 Tri-Band Wi-Fi 7 Ceiling Mount Access Point, 10G PoE and 2.5G Ports (DAP-E9560) is a genuine D-Link product, supplied new and boxed through official UK distribution. It provides the Wi-Fi coverage that laptops, phones and wireless devices connect to.
The D-Link DAP-E9560 is an indoor tri-band Wi-Fi 7 (802.11be) ceiling mount access point for small and medium-sized businesses, enterprises, and education or hospitality sites that need high-capacity wireless coverage.
It is a 2x2+2x2+2x2 BE9500 design with data rates of up to 688 Mbps on 2.4 GHz, 2882 Mbps on 5 GHz and 5764 Mbps on 6 GHz, using 320 MHz channels, 4096-QAM and Multi-Link Operation. It has two wired ports: a 10 Gigabit Ethernet PoE LAN port and a second 2.5 Gigabit Ethernet LAN port.
Full operation needs an 802.3bt PoE source or 20 V / 2.25 A over the USB Type-C power connector. On 802.3at power the 2.5G port is disabled and the 10G port is limited to 2.5G; 802.3af is not accepted. It can be managed through its web interface or centrally with D-Link's Nuclias Network Controller. No power supply is included.
What the D-Link DAP-E9560 is used for
- A tri-band Wi-Fi 7 access point for the ceilings of small and medium-sized businesses, enterprises, and education or hospitality sites
- High-capacity wireless coverage on 2.4 GHz, 5 GHz and 6 GHz, with up to 5764 Mbps on 6 GHz using 320 MHz channels
- Multi-gigabit wired connection through a 10 Gigabit Ethernet PoE LAN port and a second 2.5 Gigabit Ethernet LAN port
D-Link DAP-E9560: common questions
How is the DAP-E9560 powered?
By an IEEE 802.3bt PoE source or 20 V / 2.25 A over the USB Type-C power connector. A power supply is not part of the box contents.
Does the DAP-E9560 work on 802.3at PoE?
Yes, with limits. With an 802.3at source the 2.5G port is switched off and the 10G port runs at 2.5G. 802.3af power is not accepted.
Does it need a controller?
No. It can be managed on its own through its web interface, Telnet/SSH or SNMP, or centrally with D-Link's Nuclias Network Controller.
Is the ceiling mount included?
Yes. Ceiling brackets and a mounting plate are in the box, for ceiling or wall mounting.
Is it an indoor or outdoor access point?
Indoor. Its operating temperature range is 0 to 40 °C.
See all D-Link products or wireless access points from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- Tri-band Wi-Fi 7 (802.11be) BE9500: 2x2 on 2.4 GHz, 5 GHz and 6 GHz
- Up to 688 Mbps (2.4 GHz), 2882 Mbps (5 GHz) and 5764 Mbps (6 GHz)
- 320 MHz channels, 4096-QAM and Multi-Link Operation (MLO)
- 1 x 10 Gigabit Ethernet PoE LAN port plus 1 x 2.5 Gigabit Ethernet LAN port
- Powered by 802.3bt PoE or 20 V / 2.25 A USB Type-C; maximum consumption 27.756 W
- On 802.3at power the 2.5G port is disabled and the 10G port runs at 2.5G; no 802.3af support
- WPA3 Personal/Enterprise, 802.1X, MAC/IP ACLs, VLAN per SSID and customisable captive portal
- Web, Telnet/SSH and SNMP management, or central control by Nuclias Network Controller
- 223.04 x 223.04 x 46.7 mm, 1167 g; ceiling brackets and mounting plate included
General
- Wi-Fi standard: Wi-Fi 7 (802.11be)
- Power over Ethernet: PoE++ (802.3bt)
- USB: USB-C
- Cellular: 5G
- Ethernet: 10GbE
- Product type: Indoor tri-band Wi-Fi 7 ceiling mount access point
- Hardware version: A1
- Certifications: CE, IC, FCC, LVD
- Part number: DAP-E9560
- Brand: D-Link
- EAN: 790069477355
Wireless
- Wi-Fi generation: Wi-Fi 7 (IEEE 802.11be); IEEE 802.11be/ax/ac/n/g/b/a
- Frequency bands: 2.4 GHz, 5 GHz and 6 GHz; operating frequency 2.4 - 2.483 GHz, 5.15 - 5.35 GHz, 5.925 - 7.125 GHz (ranges vary by country)
- Spatial streams: 2x2 + 2x2 + 2x2 (tri-band)
- Maximum data rate: 2.4 GHz up to 688 Mbps; 5 GHz up to 2882 Mbps; 6 GHz up to 5764 Mbps (maximum wireless signal rate)
- Channel widths: Up to 320 MHz
- Antennas: Internal: 2 x 3.3 dBi @ 2.4 GHz, 2 x 4.8 dBi @ 5 GHz, 2 x 4.6 dBi @ 6 GHz
- Maximum output power: 23 dBm (2.4 GHz), 25 dBm (5 GHz), 24 dBm (6 GHz); board limit, actual output depends on regulatory requirements
- Operating modes: Access point; wireless distribution system (WDS) with access point; WDS/bridge (no AP broadcasting)
Ports
- Ethernet ports: 1 x 10 Gigabit Ethernet PoE LAN port; 1 x 2.5 Gigabit Ethernet LAN port
- Other ports: 1 x RJ45 console port, 1 x USB Type-C power connector, reset button
Power over Ethernet
- PoE requirement: IEEE 802.3bt PoE
- Operation on 802.3at: Supported: the 2.5G Ethernet port is disabled and the 10G Ethernet port is limited to 2.5G; 802.3af power input is not accepted
Power
- DC power input: 20 V / 2.25 A via USB Type-C
- Maximum power consumption: 27.756 W
Security
- Wireless security: WPA/WPA2/WPA3 Personal and Enterprise, Enhanced Open, WEP 64/128-bit, SSID broadcast disable, MAC address access control, internal RADIUS server, 802.1X, MAC/IP ACL
Management
- Management options: Web (HTTP/HTTPS), Nuclias Network Controller, Telnet/SSH, SNMP
Physical
- Dimensions (W x D x H): 223.04 x 223.04 x 46.7 mm
- Weight: 1167 g
- Mounting: Ceiling or wall mount; ceiling brackets and mounting plate included
- LED: Power/Status
Environment
- Operating temperature: 0 to 40 °C
- Storage temperature: -20 to 65 °C
- Operating humidity: 10% to 90% non-condensing
Warranty
- Manufacturer warranty: D-Link Limited Lifetime Warranty for business wireless products when registered with D-Link Europe within 30 days of purchase; 5 years if not registered (external power supplies excluded)
- DAP-E9560
- Ceiling brackets
- Mounting plate
- Quick Start Guide
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
