D-Link
DGS-1100-05PDV2D-Link DGS-1100-05PDV2 5-Port Gigabit PoE-Powered Smart Managed Switch, 2 x PoE Pass-Through (DGS-1100-05PDV2)
The D-Link DGS-1100-05PDV2 5-Port Gigabit PoE-Powered Smart Managed Switch, 2 x PoE Pass-Through (DGS-1100-05PDV2) is a genuine D-Link product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.
The D-Link DGS-1100-05PDV2 is a five-port Gigabit smart managed switch that takes its own power from a PoE switch or injector instead of a mains adapter. It is intended for places where there is a network cable but no power outlet - above a ceiling, at a door entry point or beside a pair of cameras - and where a few extra ports with VLAN and QoS control are needed.
Port 5 is the powered-device input (IEEE 802.3af/at). Ports 1 and 2 pass power on to connected devices using IEEE 802.3af, with a pass-through budget of 18 W when the switch is fed by an 802.3at source or 8 W when fed by 802.3af; ports 3 and 4 are data only. The fanless desktop case measures 150 x 97 x 28 mm, switching capacity is 10 Gbps and the MAC table holds 2K entries.
Management is through a web interface (IPv4) offering port-based and 802.1Q VLANs, surveillance and voice VLANs, IGMP snooping, bandwidth control, loopback detection and cable diagnostics. No power supply is included or required; a PoE source for port 5 must be provided separately.
What the D-Link DGS-1100-05PDV2 is used for
- Adding a few managed ports where there is a network cable but no power outlet, such as above a ceiling or at a door entry point
- Powering a pair of cameras from ports 1 and 2, with an 18 W pass-through budget when fed by an 802.3at source
- Smart managed switch with port-based and 802.1Q VLANs, surveillance and voice VLANs and QoS, run from a web interface
- Silent wall or desktop installs in a fanless 150 x 97 x 28 mm case
D-Link DGS-1100-05PDV2: common questions
Does the DGS-1100-05PDV2 need a power adapter?
No. It has no power supply and none is included. It is powered by IEEE 802.3af/at PoE through port 5, so a PoE switch or injector must be provided separately.
How much PoE can it pass through?
18 W with an 802.3at source feeding the switch, or 8 W with an 802.3af source. The output on ports 1 and 2 is IEEE 802.3af.
Which ports supply PoE?
Ports 1 and 2. Ports 3 and 4 are data only, and port 5 is the powered-device input.
How is the switch managed?
Through a web interface over IPv4, with port-based and 802.1Q VLANs, surveillance and voice VLANs, IGMP snooping, bandwidth control, loopback detection and cable diagnostics.
What warranty does it have?
The D-Link Limited Lifetime Warranty when the switch is registered with D-Link Europe within 30 days of purchase, or 5 years if it is not registered.
See all D-Link products or network switches from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 5 x 10/100/1000 Mbps ports: 2 x PoE output (ports 1-2), 2 x data, 1 x PoE-powered uplink (port 5)
- Powered by IEEE 802.3af/at PoE on port 5 - no power supply needed
- PoE pass-through budget: 18 W with 802.3at input, 8 W with 802.3af input (IEEE 802.3af output)
- 10 Gbps switching capacity, 7.44 Mpps forwarding rate, 2K-entry MAC table
- Fanless desktop design, 0 dB(A); 150 x 97 x 28 mm, 0.38 kg
- Web-based management (IPv4): port-based and 802.1Q VLAN, surveillance VLAN, voice VLAN
- IGMP snooping v1/v2, 802.1p QoS with 4 queues per port, port-based bandwidth control
- Loopback detection, cable diagnostics, port mirroring and storm control
General
- Ports: 5 ports
- Power over Ethernet: PoE+ (802.3at)
- Ethernet: Gigabit
- Product type: PoE-powered smart managed Gigabit Ethernet switch
- Hardware version: Ax
- Form factor: Desktop
- Part number: DGS-1100-05PDV2
- Brand: D-Link
- EAN: 790069453298
Ports
- Ethernet ports: 5 x 10/100/1000 Mbps: 2 x GE PoE ports and 3 x GE ports
- Uplink ports: Port 5 is the PoE powered-device (PD) input
- Port standards: IEEE 802.3, 802.3u, 802.3ab, 802.3af, 802.3x flow control, 802.3az EEE; auto-negotiation, auto MDI/MDIX
Power over Ethernet
- PoE standard: IEEE 802.3af (output)
- PoE ports: Ports 1 to 2
- PoE budget: PoE pass-through: 18 W with 802.3at input; 8 W with 802.3af input
Performance
- Switching capacity: 10 Gbps
- Forwarding rate: 7.44 Mpps
- MAC address table: 2K entries
- Packet buffer: 1 Mbits
- Jumbo frames: Up to 9216 bytes
Management
- Management interfaces: Web-based GUI (IPv4)
- Layer 2 features: IGMP snooping v1/v2 (128 groups), loopback detection, cable diagnostics, port mirroring, 802.3x flow control
- Link aggregation: Static trunk, 1 group
- VLAN: Port-based VLAN, 802.1Q tagged VLAN, 32 static VLAN groups, surveillance VLAN, voice VLAN, management VLAN, asymmetric VLAN
- Quality of Service: 4 queues per port, 802.1p, DSCP, strict and weighted round robin scheduling, port-based bandwidth control
Security
- Security features: Static MAC addresses (up to 32 entries), broadcast, multicast and unicast storm control, port security, traffic segmentation
Power
- Power supply: None; powered by 802.3af/at PoE through PD port 5
- Maximum power consumption: 24.08 W (PoE on); 3.24 W (PoE off)
- Standby power consumption: 1.728 W
Physical
- Dimensions: 150 x 97 x 28 mm
- Weight: 0.38 kg
- Cooling: Fanless
- Acoustic noise: 0 dB(A)
- Mounting: Desktop; wall-mount kit supplied
Environment
- Operating temperature: 0 to 40 °C
- Storage temperature: -40 to 70 °C
- Operating humidity: 0% to 90% RH, non-condensing
Warranty
- Manufacturer warranty: D-Link Limited Lifetime Warranty when the switch is registered with D-Link Europe within 30 days of purchase; 5 years if not registered
- DGS-1100-05PDV2 switch
- Four rubber feet
- Wall-mount kit
- Quick Installation Guide
- CD (user manual)
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
