D-Link
DGS-1100-08PV2/BD-Link DGS-1100-08PV2 8-Port Gigabit Smart Managed PoE Switch, 8 x PoE+ (64 W), Fanless (DGS-1100-08PV2/B)
The D-Link DGS-1100-08PV2 8-Port Gigabit Smart Managed PoE Switch, 8 x PoE+ (64 W), Fanless (DGS-1100-08PV2/B) is a genuine D-Link product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.
The D-Link DGS-1100-08PV2 is an eight-port Gigabit smart managed PoE switch for small offices, shops and small IP surveillance or Wi-Fi installations. Every port can power a device such as an IP camera, VoIP phone or wireless access point over the network cable, while a simple web interface adds VLANs, QoS and troubleshooting tools.
All eight 10/100/1000 Mbps ports support IEEE 802.3af/at PoE (up to 30 W per port) within a total budget of 64 W. The switch is fanless and silent, measures 171 x 97.8 x 28.6 mm and is powered by an external 100-240 V AC adapter. Switching capacity is 16 Gbps with a 4K-entry MAC table; maximum consumption is 77.9 W with PoE in use.
Management is through a web interface (IPv4) with port-based and 802.1Q VLANs, surveillance and voice VLANs, IGMP snooping, static trunking, bandwidth control, loopback detection and cable diagnostics. D-Link notes that time-based PoE scheduling is not available on this model.
What the D-Link DGS-1100-08PV2/B is used for
- 8 port PoE switch for small offices, shops and small IP surveillance or Wi-Fi installations, with every port able to power a device
- Powering IP cameras, VoIP phones or wireless access points at up to 30 W per port within a 64 W total budget
- Separating camera and phone traffic with surveillance and voice VLANs, set through a web interface
- Silent desk or wall mounting in a fanless case, with a wall-mount kit supplied
D-Link DGS-1100-08PV2/B: common questions
What is the PoE budget of the DGS-1100-08PV2/B?
64 W in total across all eight ports, with up to 30 W on a single port under IEEE 802.3af/at.
Is the DGS-1100-08PV2 a managed switch?
Yes. It is a smart managed switch configured through a web interface over IPv4, with port-based and 802.1Q VLANs, QoS, IGMP snooping and static trunking.
Can PoE be scheduled by time on this model?
No. Time-based PoE scheduling is not available on this model, according to D-Link.
Is the power adapter included?
Yes. An external AC power adapter for 100 to 240 V AC is in the box, with four rubber feet, a wall-mount kit, a Quick Installation Guide and a CD.
Does the switch make any noise?
No. It is fanless, with acoustic noise listed as 0 dB(A).
See all D-Link products or network switches from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 8 x 10/100/1000 Mbps PoE ports (IEEE 802.3af/at, up to 30 W per port)
- 64 W total PoE power budget
- 16 Gbps switching capacity, 11.9 Mpps forwarding rate, 4K-entry MAC table
- Fanless desktop design, 0 dB(A); 171 x 97.8 x 28.6 mm, 0.43 kg
- Web-based management (IPv4): port-based and 802.1Q VLAN, surveillance VLAN, voice VLAN
- IGMP snooping v1/v2, 802.1p QoS with 4 queues per port, port-based bandwidth control
- Static trunking (2 groups), loopback detection, cable diagnostics and port mirroring
- External 100-240 V AC power adapter; wall-mount kit supplied
General
- Ports: 8 ports
- Power over Ethernet: PoE+ (802.3at)
- Ethernet: Gigabit
- Product type: Smart managed Gigabit Ethernet PoE switch
- Hardware version: Ax
- Form factor: Desktop
- Part number: DGS-1100-08PV2/B
- Brand: D-Link
- EAN: 790069469046
Ports
- Ethernet ports: 8 x 10/100/1000 Mbps PoE ports
- Port standards: IEEE 802.3, 802.3u, 802.3ab, 802.3af/at PoE, 802.3x flow control, 802.3az EEE; auto-negotiation, auto MDI/MDIX
Power over Ethernet
- PoE standard: IEEE 802.3af/at
- PoE ports: Ports 1 to 8
- PoE budget: 64 W
- Maximum power per port: Up to 30 W
Performance
- Switching capacity: 16 Gbps
- Forwarding rate: 11.9 Mpps
- MAC address table: 4K entries
- Packet buffer: 1.5 Mbits
- Jumbo frames: Up to 9216 bytes
Management
- Management interfaces: Web-based GUI (IPv4)
- Layer 2 features: IGMP snooping v1/v2 (128 groups), loopback detection, cable diagnostics, port mirroring, 802.3x flow control
- Link aggregation: Static trunk, 2 groups
- VLAN: Port-based VLAN, 802.1Q tagged VLAN, 32 static VLAN groups, surveillance VLAN, voice VLAN, management VLAN, asymmetric VLAN
- Quality of Service: 4 queues per port, 802.1p, DSCP, strict and weighted round robin scheduling, port-based bandwidth control
Security
- Security features: Static MAC addresses (up to 32 entries), broadcast, multicast and unicast storm control, port security, traffic segmentation
Power
- Power supply: External power adapter, 100 to 240 V AC, 50 to 60 Hz
- Maximum power consumption: 77.9 W (PoE on); 4.6 W (PoE off)
- Standby power consumption: 2.0 W
- Heat dissipation: 265.85 BTU/hr
Physical
- Dimensions: 171 x 97.8 x 28.6 mm
- Weight: 0.43 kg
- Cooling: Fanless
- Acoustic noise: 0 dB(A)
- Mounting: Desktop; wall-mount kit supplied
Environment
- Operating temperature: 0 to 40 °C
- Storage temperature: -40 to 70 °C
- Operating humidity: 0% to 90% RH, non-condensing
Warranty
- Manufacturer warranty: D-Link Limited Lifetime Warranty when the switch is registered with D-Link Europe within 30 days of purchase; 5 years if not registered
- DGS-1100-08PV2 switch
- AC external power adapter
- Four rubber feet
- Wall-mount kit
- Quick Installation Guide
- CD (user manual)
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
