D-Link
DGS-1250-52XMPD-Link DGS-1250-52XMP 52-Port Gigabit Smart Managed PoE Switch, 48 x PoE+ (370 W) + 4 x 10G SFP+ (DGS-1250-52XMP)
The D-Link DGS-1250-52XMP 52-Port Gigabit Smart Managed PoE Switch, 48 x PoE+ (370 W) + 4 x 10G SFP+ (DGS-1250-52XMP) is a genuine D-Link product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.
The D-Link DGS-1250-52XMP is a 52-port Gigabit smart managed PoE switch with four 10G SFP+ uplinks. It is intended for small and medium-sized business networks that need to power a full switch of IP phones, wireless access points or cameras and carry their traffic to the core or to servers over 10-Gigabit fibre or direct-attach links.
All 48 10/100/1000BASE-T ports supply IEEE 802.3af/at PoE, up to 30 W per port, from a 370 W budget - so not every port can draw full power at once. Switching capacity is 176 Gbps with a 130.95 Mpps forwarding rate and a 32K MAC address table. The 1U chassis measures 440 x 250 x 44 mm, weighs 3.85 kg, has an internal power supply and is cooled by smart fans.
Management is through a multilingual web interface, the D-Link Network Assistant utility, a full CLI on the RJ-45 console port or Telnet, and SNMP. Static routing, ACLs, 802.1X, IP-MAC-port binding, Auto Voice VLAN and an ONVIF-aware Surveillance Mode are included, with dual firmware images and dual configuration files. This is the hardware version A model; SFP and SFP+ transceivers are sold separately.
What the D-Link DGS-1250-52XMP is used for
- A 48 port PoE switch for IP phones, wireless access points or cameras, with up to 30 W per port from a 370 W budget
- 10-Gigabit uplinks to the core or to servers over fibre or direct-attach cable through 4 x 10G SFP+ ports
- Dense 1U access switching for small and medium-sized business networks, with VLANs, ACLs, 802.1X and static routing
D-Link DGS-1250-52XMP: common questions
Can the DGS-1250-52XMP power all 48 ports at 30 W?
No. Each of the 48 ports can supply up to 30 W (IEEE 802.3af/at), but the total PoE budget is 370 W, so not every port can draw full power at once.
How is the DGS-1250-52XMP managed?
Through a multilingual web interface, the D-Link Network Assistant utility, a full CLI on the RJ-45 console port or over Telnet, and SNMP v1/v2c/v3.
How noisy is the switch?
Between 43.0 dB(A) and 51.2 dB(A). It is cooled by smart fans that change speed with temperature.
Are SFP+ transceivers included?
No. Neither SFP nor SFP+ transceivers come with the switch. D-Link lists the DEM-431XT and DEM-432XT SFP+ modules and the DEM-CB100S and DEM-CB300S direct-attach cables as options.
What is supplied in the box?
The switch, a Quick Installation Guide, an AC power cord, a console cable (RJ45 to RS-232), a rack mounting kit with two brackets and screws, four adhesive rubber feet and a power cord retainer set.
See all D-Link products or network switches from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 48 x 10/100/1000BASE-T PoE ports (IEEE 802.3af/at, up to 30 W per port)
- 370 W total PoE power budget
- 4 x 10G SFP+ uplink ports
- 176 Gbps switching capacity, 130.95 Mpps forwarding rate, 32K MAC address table
- Static routing: 124 IPv4 and 50 IPv6 static route entries, 4 IP interfaces
- 802.1Q VLANs (up to 4094 static groups), Auto Voice VLAN and Auto Surveillance VLAN
- ACLs, 802.1X, IP-MAC-port binding, DHCP snooping and D-Link Safeguard Engine
- Web UI, full CLI via RJ-45 console port and Telnet, SNMP v1/v2c/v3, D-Link Network Assistant
- Dual firmware images and dual configuration files; time-based PoE and PD-Alive
- 1U rack-mount chassis with smart fans; rack mounting kit supplied
General
- Ports: 52 ports
- Power over Ethernet: PoE+ (802.3at)
- Ethernet: Gigabit
- Product type: Smart managed Gigabit Ethernet PoE switch with 10G uplinks
- Hardware version: Ax (A1)
- Switching layer: Layer 2 with static routing
- Part number: DGS-1250-52XMP
- Brand: D-Link
- EAN: 790069443022
Ports
- Ethernet ports: 48 x 10/100/1000BASE-T PoE
- Uplink ports: 4 x 10G SFP+
- Console port: RJ-45 port for CLI management
- Port standards: IEEE 802.3 10BASE-T, 802.3u 100BASE-TX/100BASE-FX, 802.3ab 1000BASE-T, 802.3z 1000BASE-X, 802.3ae 10 Gigabit Ethernet, 802.3az EEE, 802.3x flow control, 802.3af/at
Power over Ethernet
- PoE standard: IEEE 802.3af/at
- PoE ports: 48
- PoE budget: 370 W
- Maximum power per port: 30 W
- PoE features: Time-based PoE, PD-Alive
Performance
- Switching capacity: 176 Gbps
- Forwarding rate: 130.95 Mpps (64-byte packets)
- MAC address table: 32K
- Packet buffer: 16 Mbits
- Jumbo frames: Up to 12,000 bytes
Management
- Management interfaces: Web-based GUI, D-Link Network Assistant, full CLI (console port, Telnet), SNMP v1/v2c/v3
- Layer 2 features: IGMP snooping v1/v2/v3 (256 groups), MLD snooping, 802.1D/802.1w/802.1s spanning tree, LLDP/LLDP-MED, port mirroring, loopback detection, cable diagnostics, DDM for optics
- Link aggregation: IEEE 802.3ad; up to 8 groups per device, 8 ports per group
- VLAN: 802.1Q, up to 4094 static VLAN groups, asymmetric VLAN, Auto Voice VLAN, Auto Surveillance VLAN
- Layer 3 features: Static routing (124 IPv4 and 50 IPv6 static route entries), 4 IP interfaces, IPv6 neighbour discovery
- Quality of Service: 8 queues per port, 802.1p, strict, WRR and WDRR scheduling, port-based bandwidth control
- Firmware: Dual images and dual configurations
Security
- Security features: ACLs (up to 50 access lists, 768 rules), port security (up to 64 MAC addresses per port), DHCP snooping, DHCP server screening, ARP spoofing prevention, IP-MAC-port binding, D-Link Safeguard Engine, SSH v2, TLS v1.2
- Authentication: 802.1X port-based and host-based access control, MAC authentication, AAA with RADIUS/TACACS+
Power
- Power supply: Internal universal power supply, 100 to 240 V AC, 50/60 Hz
- Maximum power consumption: PoE on: 467.3 W at 100 V, 443.6 W at 240 V; PoE off: 56.4 W at 100 V, 57.2 W at 240 V
- Standby power consumption: 27.8 W at 100 V; 28.4 W at 240 V
- Heat dissipation: PoE on: 1593.493 BTU/hr (100 V), 1512.676 BTU/hr (240 V); PoE off: 192.324 BTU/hr (100 V), 195.052 BTU/hr (240 V)
Physical
- Dimensions: 440 x 250 x 44 mm (L x W x H)
- Weight: 3.85 kg
- Cooling: Smart fans (speed changes with temperature)
- Acoustic noise: Max 51.2 dB(A); min 43.0 dB(A)
- Mounting: Desktop or 19-inch rack; rack mounting kit and rubber feet supplied
Environment
- Operating temperature: -5 to 50 °C
- Storage temperature: -20 to 70 °C
- Operating humidity: 0% to 95% relative humidity
Compatibility
- Optional transceivers: D-Link DGS-712, DEM-310GT, DEM-311GT, DEM-314GT (SFP); DEM-431XT, DEM-432XT (SFP+); DEM-CB100S, DEM-CB300S direct-attach cables
Warranty
- Manufacturer warranty: D-Link Limited Lifetime Warranty when the switch is registered with D-Link Europe within 30 days of purchase; 5 years if not registered
- DGS-1250-52XMP switch
- Quick Installation Guide
- AC power cord
- Console cable (RJ45 to RS-232)
- Rack mounting kit (two brackets and screws)
- Four rubber feet with adhesive backing
- Power cord retainer set
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
