D-Link
DGS-3130-30TS/BD-Link DGS-3130-30TS 30-Port L3 Stackable Managed Switch, 24 x GbE + 2 x 10GBASE-T + 4 x 10G SFP+ (DGS-3130-30TS/B)
The D-Link DGS-3130-30TS 30-Port L3 Stackable Managed Switch, 24 x GbE + 2 x 10GBASE-T + 4 x 10G SFP+ (DGS-3130-30TS/B) is a genuine D-Link product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.
The D-Link DGS-3130-30TS is a 30-port Layer 3 stackable managed Gigabit switch for enterprise access layers and metro Ethernet networks. It suits organisations that need full managed-switch features - dynamic routing, strong access control, OAM and stacking - at the edge, with 10-Gigabit links back to the core.
It provides 24 x 10/100/1000BASE-T ports, two 10GBASE-T ports and four 10G SFP+ ports. Switching capacity is 168 Gbps with a 125 Mpps forwarding rate and a 16K-entry MAC table. Up to nine of these 30-port units can form one physical stack with up to 80 Gbps of stacking bandwidth. The 1U chassis (440 x 250 x 44 mm, 3.2 kg) has one smart fan and draws at most 30.36 W. This model does not supply PoE.
Layer 3 features include static routing, RIP, OSPF, VRRP and policy-based routing. The switch has an RJ-45 console port, a separate out-of-band management port and a USB 2.0 port for firmware, configuration and log files, plus 6 kV surge protection on the Gigabit access ports. An external redundant power supply (DPS-500A or DPS-500DC) is optional.
What the D-Link DGS-3130-30TS/B is used for
- A Layer 3 managed switch for enterprise access layers and metro Ethernet, with RIP, OSPF, VRRP and policy-based routing
- Connecting 24 Gigabit devices with 10-Gigabit links back to the core over 2 x 10GBASE-T and 4 x 10G SFP+ ports
- Stacking up to 9 units in a ring or chain with up to 80 Gbps of stacking bandwidth
D-Link DGS-3130-30TS/B: common questions
Does the DGS-3130-30TS/B supply PoE?
No. It is a non-PoE model, with a maximum power consumption of 30.36 W.
How many DGS-3130-30TS/B switches can be stacked?
Up to nine of these 30-port units in one physical stack, in a ring or chain, with up to 80 Gbps of stacking bandwidth.
Can a redundant power supply be added?
Yes, as an option. An external redundant power supply, the DPS-500A (AC) or DPS-500DC (DC), can be connected. It is not part of the box contents.
What management ports does the switch have?
An RJ-45 console port for the CLI, a separate out-of-band management port and a USB 2.0 Type A port for firmware, configuration and log files. A console cable (RJ45 to RS-232) is supplied.
Which SFP+ modules does D-Link list for it?
The DEM-431XT, DEM-432XT, DEM-433XT, DEM-434XT and DEM-435XT SFP+ transceivers, plus DEM-CB100S/CB300S/CB700S DAC cables.
See all D-Link products or network switches from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 24 x 10/100/1000BASE-T ports, 2 x 10GBASE-T ports and 4 x 10G SFP+ ports
- Layer 3 managed: static routing, RIPv1/v2/RIPng, OSPF v2/v3, VRRP, policy-based routing
- Physical stacking of up to 9 units, up to 80 Gbps stacking bandwidth, ring or chain
- 168 Gbps switching capacity, 125 Mpps forwarding rate, 16K-entry MAC table
- RJ-45 console port, out-of-band management port and USB 2.0 port
- ERPS v1/v2, 802.1D/w/s spanning tree, Q-in-Q, RSPAN and L2 protocol tunnelling
- ACLs, 802.1X, web and MAC-based access control, DHCP snooping, IP source guard
- 6 kV surge protection on the Gigabit Ethernet access ports
- Optional external redundant power supply: DPS-500A (AC) or DPS-500DC (DC)
- 1U chassis with one smart fan; 30.36 W maximum power consumption
General
- Ports: 30 ports
- Ethernet: Gigabit
- Product type: Layer 3 stackable managed Gigabit Ethernet switch
- Hardware version: B1
- Switching layer: Layer 3 (static routing, RIP, OSPF)
- Part number: DGS-3130-30TS/B
- Brand: D-Link
- EAN: 790069469978
Ports
- Ethernet ports: 24 x 10/100/1000BASE-T
- Uplink ports: 2 x 10GBASE-T; 4 x 10G SFP+
- Console port: 10/100/1000BASE-T RJ-45 port for out-of-band CLI management
- Management port: 10/100/1000BASE-T RJ-45 port for out-of-band IP management
- USB port: 1 x USB 2.0 Type A
Performance
- Switching capacity: 168 Gbps
- Forwarding rate: 125 Mpps (64-byte packets)
- MAC address table: 16K (16,384) entries
- Packet buffer: 2 MB
- Jumbo frames: Up to 9 Kbytes
Management
- Management interfaces: Web-based GUI, Command Line Interface (console, Telnet, SSH), SNMP v1/v2c/v3, sFlow, RMON
- Stacking: Physical stacking via 4 stacking ports: up to 9 units of this model per stack (stacking cost 1 per unit), up to 80 Gbps stacking bandwidth, ring/chain topology; virtual stacking (Single IP Management), up to 32 units
- Layer 2 features: IGMP and MLD snooping (1024 groups each), 802.1D/802.1w/802.1s spanning tree, ERPS v1/v2, port, flow and VLAN mirroring, RSPAN, L2 protocol tunnelling, loopback detection
- Link aggregation: IEEE 802.1AX/802.3ad; max. 32 groups per device, 8 ports per group
- VLAN: 802.1Q, max. 4K VLAN groups, GVRP, port-based and selective Q-in-Q, voice VLAN, Auto Surveillance VLAN, MAC-based and protocol-based VLAN, private VLAN, VLAN translation
- Layer 3 features: IPv4/IPv6 static routes (max. 512 IPv4, 256 IPv6), RIPv1/v2/ng, OSPF v2/v3, VRRP v2/v3, policy-based routing, ECMP, 128 IP interfaces, 1024 hardware routing entries shared by IPv4/IPv6
- Quality of Service: 8 queues per port, 802.1p, strict, WRR and WDRR scheduling, port, flow and queue bandwidth control, three colour marker, WRED
- OAM: 802.3ah Ethernet link OAM, 802.1ag CFM, Y.1731, D-Link Unidirectional Link Detection, dying gasp, optical transceiver DDM
- Firmware: Multiple images and multiple configurations
Security
- Security features: ACLs (2048 ingress and 512 egress hardware entries), port security (up to 64 MAC addresses per port), DHCP snooping, IP source guard, dynamic ARP inspection, D-Link Safeguard Engine, SSH v2, TLS 1.0/1.1/1.2
- Authentication: 802.1X, web-based access control, MAC-based access control, guest VLAN, RADIUS and TACACS+ authentication and accounting
Power
- Power supply: Internal power supply, 100 to 240 V AC, 50 to 60 Hz
- Maximum power consumption: 30.36 W
- Standby power consumption: 13.23 W
- Heat dissipation: 103.59 BTU/h
- Redundant power: Optional external redundant power supply: DPS-500A or DPS-500DC
- Surge protection: 6 kV surge protection on the Gigabit Ethernet RJ-45 access ports
Physical
- Dimensions: 440 x 250 x 44 mm (W x D x H)
- Weight: 3.2 kg
- Cooling: 1 x smart fan
- Acoustic noise: Max 47 dB; min 39.7 dB
- Mounting: 19-inch rack or desktop; rack mounting kit and rubber feet supplied
Environment
- Operating temperature: 0 to 50 °C
- Storage temperature: -40 to 70 °C
- Operating humidity: 10% to 90% RH
Compatibility
- Optional transceivers: D-Link DEM-211, DGS-712, DEM-310GT, DEM-311GT, DEM-312GT2, DEM-314GT, DEM-315GT (SFP); DEM-431XT, DEM-432XT, DEM-433XT, DEM-434XT, DEM-435XT (SFP+); DEM-CB100S/CB300S/CB700S DAC cables
Warranty
- Manufacturer warranty: D-Link Limited Lifetime Warranty when the switch is registered with D-Link Europe within 30 days of purchase; 5 years if not registered
- DGS-3130-30TS switch
- Quick Installation Guide
- AC power cord
- Console cable (RJ45 to RS-232)
- Rack mounting kit (two brackets and screws)
- Four rubber feet with adhesive backing
- Power cord retainer set
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
