D-Link DMS-1250-18P/B

D-Link DMS-1250-18P 18-Port 2.5G Smart Managed PoE++ Switch, 16 x 802.3bt (370 W) + 2 x 10G SFP+ (DMS-1250-18P/B)

Exc VAT £370.00
Inc VAT £444.00
4Low stock
Buying for a project? Volume pricing and stock allocation 0333 242 1314 · sales@clisecure.com Get a quote
Ports16 ports
PoE budget370 W
Uplinks2 x 10G SFP+
Switching capacity120 Gbps

The D-Link DMS-1250-18P 18-Port 2.5G Smart Managed PoE++ Switch, 16 x 802.3bt (370 W) + 2 x 10G SFP+ (DMS-1250-18P/B) is a genuine D-Link product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.

The D-Link DMS-1250-18P is a 2.5G multi-gigabit smart managed switch from the DMS-1250 Series. The series is designed for small and medium-sized businesses and multi-dwelling buildings that are moving to Wi-Fi 6 access points, NAS and workstations with 2.5G ports and want to use existing Cat 5e cabling, with 10-Gigabit uplinks to the rest of the network. PoE on the 2.5G ports powers access points, cameras and phones directly from the switch.

This model has sixteen 100/1000/2.5GBASE-T ports that all support IEEE 802.3af/at/bt PoE, up to 90 W on a port, from a 370 W budget, plus two 10G SFP+ uplink slots. Switching capacity is 120 Gbps with an 89.29 Mpps forwarding rate. The 440 x 250 x 44 mm chassis has an internal power supply and three internal fans, and draws up to 443.84 W with PoE in use.

Management is through a multilingual web interface, a full CLI (RJ-45 console port or Telnet) and SNMP. D-Link also supports the series in Nuclias Connect (version 1.3.0 or later), the DNH-1000 and DNH-3000 hubs and Nuclias Hyper. Layer 2 features include 4094 VLANs, MSTP, LACP, ERPS and IGMP snooping, with static routing, ACLs and 802.1X; all 2.5G ports have 6 kV surge protection. SFP+ transceivers are sold separately.

What the D-Link DMS-1250-18P/B is used for

  • Powering access points, cameras and phones from 16 x 2.5G ports with IEEE 802.3af/at/bt PoE, up to 90 W on a port from a 370 W budget
  • A 16 port PoE switch with smart management and 2 x 10G SFP+ uplink slots for small and medium-sized businesses
  • Controlling power to connected devices with Perpetual PoE, Fast PoE, PD-Alive and time-based PoE schedules

D-Link DMS-1250-18P/B: common questions

How much PoE power does the DMS-1250-18P/B provide?

370 W in total. All sixteen 2.5G ports support IEEE 802.3af/at/bt PoE, with up to 90 W on a port.

Can every port deliver 90 W at the same time?

No. Any port can supply up to 90 W, but all sixteen ports share the 370 W budget.

Is the DMS-1250-18P/B fanless?

No. It has three internal fans. It draws up to 443.84 W with PoE in use.

What uplink ports does it have?

Two 10G SFP+ slots. SFP+ transceivers are sold separately; D-Link lists the DEM-431XT, DEM-432XT and DEM-410T (10GBASE-T copper) and the DEM-CB100S and DEM-CB300S direct-attach cables.

How is the switch managed?

Through a multilingual web interface, a full CLI on the RJ-45 console port or over Telnet, and SNMP. The series is also supported in D-Link Nuclias Connect from version 1.3.0.

Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.

  • 16 x 100/1000/2.5GBASE-T PoE ports
  • 2 x 10G SFP+ uplink ports
  • IEEE 802.3af/at/bt, up to 90 W per port PoE, 370 W total budget
  • 120 Gbps switching capacity, 89.29 Mpps forwarding rate, 16K MAC address table
  • 3 internal fans; 440 x 250 x 44 mm, 3.592 kg
  • 6 kV surge protection on all 2.5-Gigabit Ethernet ports
  • Static routing: 128 IPv4 and 64 IPv6 static route entries
  • 802.1Q VLANs (4094 static groups), MSTP, 802.3ad link aggregation, ERPS, IGMP snooping
  • Web UI, full CLI with console port, SNMP v1/v2c/v3; dual image and dual configuration
  • Perpetual PoE, Fast PoE, PD-Alive and time-based PoE

General

  • Ports: 18 ports
  • Power over Ethernet: PoE++ (802.3bt)
  • Cellular: 5G
  • Ethernet: Gigabit
  • Product type: 2.5G multi-gigabit smart managed switch with PoE
  • Hardware version: A1
  • Switching layer: Layer 2 with static routing
  • Part number: DMS-1250-18P/B
  • Brand: D-Link
  • EAN: 790069477843

Ports

  • Ethernet ports: 16 x 100/1000/2.5GBASE-T PoE
  • Uplink ports: 2 x 10G SFP+
  • Console port: RJ-45 console port
  • Port standards: IEEE 802.3u 100BASE-TX, 802.3ab 1000BASE-T, 802.3bz 2.5GBASE-T, 802.3ae 10G Ethernet over fibre, 802.3z 1000BASE-X, 802.3az EEE
  • Network cables: UTP Cat. 5e or better for 100/1000/2.5GBASE-T (max. 100 m)

Power over Ethernet

  • PoE standard: IEEE 802.3af/at/bt (90 W)
  • PoE ports: 16 (all 2.5G ports, IEEE 802.3bt)
  • PoE budget: 370 W
  • Maximum power per port: 90 W
  • PoE features: Perpetual PoE, Fast PoE, PD-Alive, time-based PoE

Performance

  • Switching capacity: 120 Gbps
  • Forwarding rate: 89.29 Mpps
  • MAC address table: 16K
  • Packet buffer: 12 Mbits
  • Jumbo frames: Up to 12,000 bytes

Management

  • Management interfaces: Web-based GUI, full CLI, Telnet server, SNMP v1/v2c/v3
  • Central management: D-Link Nuclias Connect (version 1.3.0 or later), DNH-1000, DNH-3000 and Nuclias Hyper
  • Layer 2 features: IGMP snooping (256 groups), MLD snooping, 802.1D/802.1w/802.1s spanning tree, ERPS, LLDP/LLDP-MED, port mirroring, loopback detection, cable diagnostics, DDM for optics
  • Link aggregation: IEEE 802.3ad; up to 8 groups per device, 8 ports per group
  • VLAN: 802.1Q, max. 4094 static VLAN groups, GVRP, asymmetric VLAN, Auto Voice VLAN, Auto Surveillance VLAN, ISM VLAN, VLAN translation, selective Q-in-Q
  • Layer 3 features: Static routing (128 IPv4 and 64 IPv6 static route entries), IPv4 and IPv6 interfaces, IPv6 neighbour discovery
  • Quality of Service: 8 queues per port, 802.1p, DSCP, strict, WFQ and WRR scheduling, port-based bandwidth control
  • Firmware: Dual image and dual configuration

Security

  • Security features: ACLs (max. 50 access lists), port security (up to 64 MAC addresses per port), DHCP snooping, DHCP server screening, ARP inspection, IP-MAC-port binding, D-Link Safeguard Engine, TLS v1.3, DoS attack prevention
  • Authentication: 802.1X port-based and host-based access control, AAA with RADIUS/TACACS+

Power

  • Power supply: 100 to 240 V AC, 50/60 Hz (internal power supply)
  • Maximum power consumption: 443.84 W (PoE on); 31.45 W (PoE off)
  • Surge protection: IEC 61000-4-5 surge protection compliance; 6 kV surge protection on all 2.5-Gigabit Ethernet ports

Physical

  • Dimensions: 440 x 250 x 44 mm (L x W x H)
  • Weight: 3.592 kg
  • Cooling: 3 internal fans

Environment

  • Operating temperature: -5 to 50 °C
  • Storage temperature: -20 to 70 °C
  • Operating humidity: 0% to 95% relative humidity

Compatibility

  • Optional transceivers: D-Link DGS-712, DEM-310GT, DEM-311GT, DEM-314GT (SFP); DEM-410T (10GBASE-T copper), DEM-431XT, DEM-432XT (SFP+); DEM-CB100S and DEM-CB300S direct-attach cables

Warranty

  • Manufacturer warranty: Limited Lifetime Warranty for Smart Switches under the D-Link Europe warranty guide when registered within 30 days of purchase; 5 years if not registered

UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.

D-Link DMS-1250-18P 18-Port 2.5G Smart Managed PoE++ Switch, 16 x 802.3bt (370 W) + 2 x 10G SFP+ (DMS-1250-18P/B)
D-Link DMS-1250-18P 18-Port 2.5G Smart Managed PoE++ Switch, 16 x 802.3bt (370 W) + 2 x 10G SFP+ (DMS-1250-18P/B) £370.00 Exc VAT · Low stock
Trade pricing availableNext-day UK dispatchGenuine UK stockProject quote supportSecure checkoutExpert pre-sales advice

Customer reviews

★ We're on Trustpilot Bought from us? An honest review helps other installers and IT teams choose. Review us on Trustpilot

Built for B2B buying

From product selection to deployment, this is made for real projects.

Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.

1Check compatibility
2Choose fulfilment
3Deploy with support
Trade quote ready Send your basket for quantity pricing and project supply checks.
Same basket support Add licences, mounts, switches, storage or accessories with confidence.
D-Link DMS-1250-18P 18-Port 2.5G Smart Managed PoE++ Switch, 16 x 802.3bt (370 W) + 2 x 10G SFP+ (DMS-1250-18P/B)
Need fit advice? Ask before checkout and avoid wrong-spec purchases.

Why choose us

Procurement that feels fast, clear and trade-ready.

Every product page is designed to help you move from shortlist to checkout with fewer unknowns.

Genuine UK stock New, boxed products sourced through official UK distribution.
Project help Ask for fit checks, renewal advice and quantity pricing.
Fast dispatch Choose UK delivery options for urgent deployments.
Secure checkout Order online or speak to the team for larger baskets.

Common questions

Product and order FAQs

Can I request trade or bulk pricing?

Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.

How quickly can this be delivered?

Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.

Can you help confirm compatibility?

Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.

Do you supply renewals and supporting accessories?

CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.