D-Link
DMS-1250-28/BD-Link DMS-1250-28 28-Port 2.5G Smart Managed Switch, 24 x 2.5GBASE-T + 4 x 10G SFP+ (DMS-1250-28/B)
The D-Link DMS-1250-28 28-Port 2.5G Smart Managed Switch, 24 x 2.5GBASE-T + 4 x 10G SFP+ (DMS-1250-28/B) is a genuine D-Link product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.
The D-Link DMS-1250-28 is a 2.5G multi-gigabit smart managed switch from the DMS-1250 Series. The series is designed for small and medium-sized businesses and multi-dwelling buildings that are moving to Wi-Fi 6 access points, NAS and workstations with 2.5G ports and want to use existing Cat 5e cabling, with 10-Gigabit uplinks to the rest of the network.
This model has 24 x 100/1000/2.5GBASE-T ports and four 10G SFP+ uplink slots - the highest port count of the non-PoE models. Switching capacity is 200 Gbps with a 148.81 Mpps forwarding rate and a 32K MAC address table. The 440 x 250 x 44 mm chassis has an internal power supply and two internal fans, and draws at most 39.73 W. It does not supply PoE.
Management is through a multilingual web interface, a full CLI (RJ-45 console port or Telnet) and SNMP. D-Link also supports the series in Nuclias Connect (version 1.3.0 or later), the DNH-1000 and DNH-3000 hubs and Nuclias Hyper. Layer 2 features include 4094 VLANs, MSTP, LACP, ERPS and IGMP snooping, with static routing, ACLs and 802.1X; all 2.5G ports have 6 kV surge protection. SFP+ transceivers are sold separately.
What the D-Link DMS-1250-28/B is used for
- 24 ports at up to 2.5 Gbps for Wi-Fi 6 access points, NAS and workstations over existing Cat 5e cabling
- Linking to the rest of the network at 10-Gigabit speed through 4 x 10G SFP+ uplink slots
- A 2.5Gb managed switch with the highest port count of the non-PoE DMS-1250 models, for small and medium-sized businesses
D-Link DMS-1250-28/B: common questions
Does the DMS-1250-28/B supply PoE?
No. It is a non-PoE model, drawing at most 39.73 W.
How many uplink ports does the DMS-1250-28/B have?
Four 10G SFP+ slots, alongside 24 x 100/1000/2.5GBASE-T ports. Transceivers for the SFP+ slots are not supplied with the switch.
Is it fanless or fan cooled?
Fan cooled. The 440 x 250 x 44 mm chassis has two internal fans and an internal power supply.
What is the switching capacity?
200 Gbps. The forwarding rate is 148.81 Mpps and the MAC address table holds 32K entries.
Does the switch have a console port?
Yes. There is an RJ-45 console port for the full CLI, which is also available over Telnet. A web interface and SNMP v1/v2c/v3 are provided as well.
See all D-Link products or network switches from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 24 x 100/1000/2.5GBASE-T ports
- 4 x 10G SFP+ uplink ports
- 200 Gbps switching capacity, 148.81 Mpps forwarding rate, 32K MAC address table
- 2 internal fans; 440 x 250 x 44 mm, 3.498 kg
- 6 kV surge protection on all 2.5-Gigabit Ethernet ports
- Static routing: 128 IPv4 and 64 IPv6 static route entries
- 802.1Q VLANs (4094 static groups), MSTP, 802.3ad link aggregation, ERPS, IGMP snooping
- Web UI, full CLI with console port, SNMP v1/v2c/v3; dual image and dual configuration
General
- Ports: 28 ports
- Cellular: 5G
- Ethernet: Gigabit
- Product type: 2.5G multi-gigabit smart managed switch
- Hardware version: A1
- Switching layer: Layer 2 with static routing
- Part number: DMS-1250-28/B
- Brand: D-Link
- EAN: 790069477850
Ports
- Ethernet ports: 24 x 100/1000/2.5GBASE-T
- Uplink ports: 4 x 10G SFP+
- Console port: RJ-45 console port
- Port standards: IEEE 802.3u 100BASE-TX, 802.3ab 1000BASE-T, 802.3bz 2.5GBASE-T, 802.3ae 10G Ethernet over fibre, 802.3z 1000BASE-X, 802.3az EEE
- Network cables: UTP Cat. 5e or better for 100/1000/2.5GBASE-T (max. 100 m)
Performance
- Switching capacity: 200 Gbps
- Forwarding rate: 148.81 Mpps
- MAC address table: 32K
- Packet buffer: 16 Mbits
- Jumbo frames: Up to 12,000 bytes
Management
- Management interfaces: Web-based GUI, full CLI, Telnet server, SNMP v1/v2c/v3
- Central management: D-Link Nuclias Connect (version 1.3.0 or later), DNH-1000, DNH-3000 and Nuclias Hyper
- Layer 2 features: IGMP snooping (256 groups), MLD snooping, 802.1D/802.1w/802.1s spanning tree, ERPS, LLDP/LLDP-MED, port mirroring, loopback detection, cable diagnostics, DDM for optics
- Link aggregation: IEEE 802.3ad; up to 8 groups per device, 8 ports per group
- VLAN: 802.1Q, max. 4094 static VLAN groups, GVRP, asymmetric VLAN, Auto Voice VLAN, Auto Surveillance VLAN, ISM VLAN, VLAN translation, selective Q-in-Q
- Layer 3 features: Static routing (128 IPv4 and 64 IPv6 static route entries), IPv4 and IPv6 interfaces, IPv6 neighbour discovery
- Quality of Service: 8 queues per port, 802.1p, DSCP, strict, WFQ and WRR scheduling, port-based bandwidth control
- Firmware: Dual image and dual configuration
Security
- Security features: ACLs (max. 50 access lists), port security (up to 64 MAC addresses per port), DHCP snooping, DHCP server screening, ARP inspection, IP-MAC-port binding, D-Link Safeguard Engine, TLS v1.3, DoS attack prevention
- Authentication: 802.1X port-based and host-based access control, AAA with RADIUS/TACACS+
Power
- Power supply: 100 to 240 V AC, 50/60 Hz (internal power supply)
- Maximum power consumption: 39.73 W
- Surge protection: IEC 61000-4-5 surge protection compliance; 6 kV surge protection on all 2.5-Gigabit Ethernet ports
Physical
- Dimensions: 440 x 250 x 44 mm (L x W x H)
- Weight: 3.498 kg
- Cooling: 2 internal fans
Environment
- Operating temperature: -5 to 50 °C
- Storage temperature: -20 to 70 °C
- Operating humidity: 0% to 95% relative humidity
Compatibility
- Optional transceivers: D-Link DGS-712, DEM-310GT, DEM-311GT, DEM-314GT (SFP); DEM-410T (10GBASE-T copper), DEM-431XT, DEM-432XT (SFP+); DEM-CB100S and DEM-CB300S direct-attach cables
Warranty
- Manufacturer warranty: Limited Lifetime Warranty for Smart Switches under the D-Link Europe warranty guide when registered within 30 days of purchase; 5 years if not registered
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
