Fast dispatch and helpful advice before we placed a multi-site order. Pricing was clear and the product arrived ready for install.
Wesley G.Grandstream RPS-300W-B 54V 5.6A PoE Power Supply for GWN7813P
Low stock — only 3 left
The Grandstream RPS-300W-B is the 54V 5.6A power supply for the GWN7813P PoE aggregation switch. Unlike an ordinary switch supply, this one carries the PoE budget as well as the switch's own draw — which is why it is a 300W unit rather than a 60W brick.
If a GWN7813P is powering access points, cameras or phones, this supply is the single point everything downstream depends on. That makes it the one spare worth having on the shelf: when it fails, the switch and every powered device hanging off it go down together, and a replacement ordered on the day is a replacement that arrives too late.
Ideal for
- Replacing a failed or missing supply on a GWN7813P
- Shelf spares for a PoE aggregation switch carrying access points or cameras
- Comms rooms where a swap needs to happen in minutes
- MSPs and installers holding critical spares for managed sites
- Sites that will not run a PoE switch on a generic supply
Key features
- Genuine Grandstream supply — correct voltage, polarity and connector for the switch
- 54V DC at 5.6A, 300W — sized to carry the switch and its PoE budget
- PoE-rated — 54V is what 802.3af/at/bt devices are powered from
- Direct replacement — no configuration, no downtime beyond the swap
- Sold individually — order per switch; project quantities on request
Works with
- Grandstream GWN switches — including the GWN7813P
- RPS-60W-B 12V supply — the non-PoE version, for the GWN7813, GWN7831 and GWN7832
- Grandstream GWN access points — typically what this switch is powering
- All Grandstream networking
- All PSUs and accessories
Frequently asked questions
Why is this so much larger than the 60W supply?
Because it powers the connected devices too. On a non-PoE switch the supply only runs the switch; on the GWN7813P it also has to deliver the PoE budget to everything plugged into it.
Can I use the 12V RPS-60W-B instead?
No. PoE devices are powered at 54V and the GWN7813P is built around that. The 12V supply is for the non-PoE models.
Will a generic 54V adapter do?
We would not advise it. Connector, polarity and sustained current rating all have to match, and an under-rated supply on a PoE switch shows up as devices dropping off under load — one of the hardest faults to trace on a network.
Does the switch need to be powered down to swap it?
Yes — and so does everything it powers. Treat it as a planned outage and warn the site before you start.
Should I keep a spare?
If the switch carries your access points or cameras, yes. This is the component whose failure takes the most with it.
Not sure which supply your switch takes? Call 0333 242 1314 or email sales@clisecure.com with the model number and we will confirm the right part.
Electrical
| Output voltage | 54V DC |
|---|---|
| Output current | 5.6A |
| Output power | 300W |
| Input | Mains AC, external brick supply |
| Carries | Switch draw plus the PoE budget for connected devices |
Compatibility
| Fits | Grandstream GWN7813P |
|---|---|
| Does not fit | GWN7813, GWN7831, GWN7832 — these non-PoE models take the 12V RPS-60W-B |
Product details
| Type | External PoE power supply unit |
|---|---|
| Brand | Grandstream |
| Part number | RPS-300W-B |
| Sold as | Single power supply |
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Trusted by trade buyers
"CLI Secure has been our go-to for Fortinet hardware and renewals. Fast delivery and knowledgeable support every time."

"We ordered Grandstream phones for a full office rollout. The trade pricing and next-day delivery saved us both time and budget."

"Very professional IT networking supplier. Their pre-sales team helped us spec the right firewall for a multi-site deployment."

"Great stock availability on Hikvision cameras. Everything arrived well packaged and on time. Will order again."

Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Better buying value
Why trade buyers choose CLI Secure
- Trade and bulk pricing support
- Compatibility advice before purchase
- UK delivery options and account support
- Hardware, renewals and accessories in one place
- Limited project advice
- Unclear warranty or channel source
- Harder to quote bundles and renewals
- Separate suppliers for accessories
- Less flexible fulfilment for mixed baskets
- More admin for repeat trade orders
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Verified buyer feedback
Trusted by installers, resellers and IT teams.
CLI Secure helped us confirm the right supporting accessories and saved us a return. Good trade service.
Keith D.Reliable fulfilment for security hardware and renewals. The team understands what business buyers need.
Rania M.Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.





