Cisco
CBS110-24T-UKCisco Business 110 Series CBS110-24T 24-Port Gigabit Unmanaged Switch + 2 x Combo RJ-45/SFP (CBS110-24T-UK)
The Cisco Business 110 Series CBS110-24T 24-Port Gigabit Unmanaged Switch + 2 x Combo RJ-45/SFP (CBS110-24T-UK) is a genuine Cisco product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.
The Cisco Business CBS110-24T is an unmanaged Gigabit Ethernet switch for small offices that need a higher port count in the comms cabinet. It connects PCs, printers, servers and other wired devices with no software to install and nothing to configure.
Cisco's current data sheet lists 26 Gigabit Ethernet ports: 24 fixed 10/100/1000 ports plus two combo ports, each with one copper port and one Gigabit SFP slot, of which one is active at a time. Switching capacity is 48 Gbps with a forwarding rate of 35.7 mpps, and the MAC table holds 8K addresses. The unit is fanless, has an internal universal power supply, measures 279 x 170 x 44 mm and is listed by Cisco as rack-mountable.
As an unmanaged switch it needs no management or configuration. Built-in functions run automatically: 802.1p quality of service with four hardware queues, loop detection, cable diagnostics and Energy Efficient Ethernet (IEEE 802.3az). Cisco lists the MGBSX1, MGBLX1, MGBLH1 and MGBT1 SFP modules as supported. Earlier hardware versions sold under the same part number had 22 fixed ports plus two combo ports, so the port layout depends on the hardware version of the unit.
What the Cisco CBS110-24T-UK is used for
- Connecting PCs, printers, servers and other wired devices in a small-office comms cabinet on 24 fixed Gigabit ports
- An unmanaged switch with no software to install, where QoS, loop detection and cable diagnostics run by themselves
- Uplinking over fibre or copper through 2 combo ports, each with a 10/100/1000 copper port and a Gigabit SFP slot
Cisco CBS110-24T-UK: common questions
Does the CBS110-24T-UK have PoE?
No. This model does not supply PoE. All of its ports carry data only.
How many ports are on the CBS110-24T?
26 Gigabit ports on the current hardware version: 24 fixed 10/100/1000 ports plus 2 combo ports. Earlier hardware versions of the same part number had 22 fixed ports plus 2 combo ports, so the layout depends on the hardware version.
Which SFP modules does it support?
Cisco lists the MGBSX1, MGBLX1, MGBLH1 and MGBT1. Each combo port has one copper port and one SFP slot, and only one of the two is active at a time.
Is the switch rack mountable?
Yes. Cisco lists it as rack-mountable and a mounting kit is included. The chassis measures 279 x 170 x 44 mm.
Is the CBS110-24T fanless?
Yes. It has no fan and uses an internal universal power supply, drawing 17.49 W at 220 V.
See all Cisco products or network switches from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 26 Gigabit Ethernet ports: 24 x 10/100/1000 plus 2 combo ports (RJ-45 or Gigabit SFP)
- Unmanaged, plug-and-play: no software installation or configuration
- 48 Gbps switching capacity, 35.7 mpps forwarding rate (64-byte packets)
- Fanless design
- Rack-mountable, 279 x 170 x 44 mm (W x D x H); internal power supply
- 802.1p QoS with 4 hardware queues, loop detection and cable diagnostics
- Energy Efficient Ethernet (IEEE 802.3az) on all copper Gigabit ports
- Kensington lock slot
- Cisco limited lifetime hardware warranty
General
- Ports: 24 ports
- Ethernet: Gigabit
- Product type: Unmanaged Gigabit Ethernet switch
- Switch type: Unmanaged (no management or configuration required)
- Standards: IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1p, Energy Efficient Ethernet (802.3az)
- MTBF at 25°C: 524,296 hours
- Certifications: UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A; FCC Class B on select models
- Hardware version: Figures are for the current (refreshed) hardware version in Cisco's data sheet; earlier versions carry the same part number with a lower version ID (VID)
- Change from earlier hardware versions: Now 24 x Gigabit copper ports + 2 combo ports (ports 25 and 26); earlier versions had 22 + 2 combo ports (ports 23 and 24)
- Part number: CBS110-24T-UK
- Brand: Cisco
- EAN: 889728326582
Ports
- Total system ports: 26 Gigabit Ethernet
- RJ-45 ports: 26 Gigabit Ethernet (10/100/1000)
- Combo ports (RJ-45 + SFP): 2 SFP (combo with 2 Gigabit Ethernet); each combo port has one 10/100/1000 copper port and one SFP slot, with one active at a time
- Supported SFP modules: MGBSX1, MGBLX1, MGBLH1, MGBT1
- Media: Automatic MDI/MDI-X
- Cabling: Category 5e or better
Power over Ethernet
- PoE ports: None (this model does not supply PoE)
Performance
- Switching capacity: 48 Gbps
- Forwarding rate: 35.7 mpps (64-byte packets)
- Switching method: Wire-speed, nonblocking; head-of-line (HOL) blocking prevention
- MAC table: 8K addresses
- Packet buffer: 2 Mbit (aggregate)
- Jumbo frames: 9216 bytes
- Quality of service: 802.1p-based, 4 hardware queues, priority queuing and Weighted Round-Robin (WRR)
Management
- Management: None required: unmanaged, plug-and-play
- Automatic functions: Loop detection; cable diagnostics
Power
- Power supply: 100 to 240 V, 50 to 60 Hz, internal, universal
- System power consumption: 17.79 W at 110 V; 17.49 W at 220 V
- Heat dissipation: 60.7 BTU/hr
- Energy efficiency: IEEE 802.3az Energy Efficient Ethernet on all copper Gigabit Ethernet ports
Physical
- Dimensions (W x D x H): 279 x 170 x 44 mm
- Weight: 1.45 kg
- Cooling: Fanless
- Mounting: Rack-mountable; mounting kit included
- Physical security: Kensington lock slot
- LEDs: Power, link/activity (cable diagnostics, loop detection), Gigabit
- Memory: 8 MB flash; 64 MB CPU memory; 400 MHz ARM CPU
Environment
- Operating temperature: 0 to 50°C
- Storage temperature: -20 to 70°C
- Operating humidity: 10% to 90%, relative, noncondensing
- Storage humidity: 5% to 90%, relative, noncondensing
Warranty
- Manufacturer warranty: Cisco limited lifetime hardware warranty
- Cisco Business 110 Series switch
- Power cord or adapter
- Quick start guide
- Mounting kit
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
