Cisco C9350-48TX

Cisco C9350 Series Smart Switch, 48-Port 10G Multigigabit Data, Modular Uplinks (C9350-48TX)

Exc VAT £8,235.00
Inc VAT £9,882.00
2Low stock
Buying for a project? Volume pricing and stock allocation 0333 242 1314 · sales@clisecure.com Get a quote
Ports48 ports
UplinksOne network module slot
Switching capacity1760 Gbps

The Cisco C9350 Series Smart Switch, 48-Port 10G Multigigabit Data, Modular Uplinks (C9350-48TX) is a genuine Cisco product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.

The Cisco C9350 Series Smart Switches are stackable fixed access switches for campus and branch networks, built on Cisco Silicon One ASICs and running Cisco IOS XE with Layer 2 and Layer 3 forwarding. They can be managed on-premises with Cisco Catalyst Center or from the cloud through the Meraki dashboard.

The C9350-48TX is the data-only multigigabit model: 48 copper ports that each run from 10 Mbps to 10 Gbps, with no PoE. Two Silicon One A100/L ASICs give it a 1760 Gbps bandwidth specification and a 1309.44 Mpps forwarding rate. The uplink slot takes modules up to 4 x 100G (400G total), and up to eight switches stack at 1.6 Tbps with StackWise-1.6T, giving up to 448 multigigabit ports in one stack.

The switch ships with one 500 W power supply in a three-bay chassis and has no uplink module fitted; the network module is chosen separately. C9350 switches use Cisco unified licensing: a per-device Essentials or Advantage licence, bought in a Cisco Networking Subscription or Enterprise Agreement, is selected with the switch and includes software and hardware support.

What the Cisco C9350-48TX is used for

  • Giving 48 wired devices copper links from 10 Mbps up to 10 Gbps in a campus or branch network, data only
  • A stackable 10Gb switch for dense access: up to 8 units join at 1.6 Tbps with StackWise-1.6T
  • Uplinking at up to 4 x 100G (400G total) through the network module slot, with the module chosen separately
  • Layer 2 and Layer 3 access managed from Cisco Catalyst Center on-premises or the Meraki dashboard in the cloud

Cisco C9350-48TX: common questions

What speeds do the ports on the C9350-48TX support?

Each of the 48 RJ-45 ports runs at 10M, 100M, 1G, 2.5G, 5G or 10G. At 10 and 100 Mbps the ports work in full duplex only.

Does the C9350-48TX supply PoE?

No. It is the data-only multigigabit model and PoE is not supported.

Which uplink modules does it take?

The network module slot supports the C9350-NM-4C, C9350-NM-2C, C9350-NM-8Y, C9350-NM-8M and C9350-NM-8L, for up to 400G of uplink bandwidth. The module is not included.

Is a licence needed for the C9350-48TX?

Yes. Cisco unified licensing applies: a per-device Essentials or Advantage licence is selected with the switch, in a Cisco Networking Subscription (minimum 36 months for a new subscription) or an Enterprise Agreement.

Can the switch be stacked?

Yes. Up to 8 switches stack at 1.6 Tbps using StackWise-1.6T cables, together with other C9350 models on the same licence level. StackPower+ shares power across up to 4 switches.

Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.

  • 48 x multigigabit copper ports, 10 Mbps to 10 Gbps, data only (no PoE)
  • Uplink module slot (module not included): 400G uplink bandwidth with NM-4C, NM-2C, NM-8Y, NM-8M, NM-8L
  • 1760 Gbps bandwidth specification, 1309.44 Mpps forwarding rate
  • StackWise-1.6T stacking: up to 8 switches at 1.6 Tbps; StackPower+ power sharing across up to 4 switches
  • Dual Cisco Silicon One A100/L ASIC, 16 GB DRAM, 18 GB flash, optional SSD up to 240 GB
  • Three power supply bays (one PWR-C2-500WAC included) and three field-replaceable fans with N+1 redundancy
  • Managed by Cisco Catalyst Center, Meraki dashboard or CLI; NETCONF/RESTCONF with YANG
  • Cisco unified licensing: Essentials or Advantage licence selected separately from the hardware
  • 1RU, 8 kg with default power supply; Cisco Limited Lifetime Warranty

General

  • Ports: 48 ports
  • Power over Ethernet: PoE (802.3af)
  • Product type: Stackable managed 10G multigigabit Ethernet access switch
  • Series: Cisco C9350 Series Smart Switches
  • Switching layer: Layer 2 and Layer 3 (IP routing, IPv6 routing, IP multicast routing)
  • Operating system: Cisco IOS XE (minimum release 17.18.1)
  • Licensing: Cisco unified licensing: per-device Essentials or Advantage licence in a Cisco Networking Subscription (minimum 36 months for a new subscription) or Enterprise Agreement, selected with the switch
  • Part number: C9350-48TX
  • Brand: Cisco
  • EAN: 889728593724

Ports

  • Downlink ports: 48 x 10M/100M/1G/2.5G/5G/10G multigigabit RJ-45 (data only; 10/100 Mbps full duplex only)
  • Uplinks: One network module slot (module not included); supported modules: C9350-NM-4C, C9350-NM-2C, C9350-NM-8Y, C9350-NM-8M, C9350-NM-8L; up to 400G uplink bandwidth
  • Stacking: StackWise-1.6T: 1.6 Tbps, up to 8 switches, using StackWise-1.6T cables; stacks with other C9350 models on the same licence level
  • Management and console ports: Front: USB Type-C console, USB Type-C host. Rear: RJ-45 console, RJ-45 10/100/1000 management port, USB 3.0 SSD slot

Power over Ethernet

  • PoE: Not supported (data-only model)

Performance

  • Switching capacity: 1760 Gbps (bandwidth specification)
  • Forwarding rate: 1309.44 Mpps
  • Switching capacity with stacking: 3360 Gbps
  • Forwarding rate with stacking: 2499.84 Mpps
  • ASIC: 2 x Cisco Silicon One A100/L
  • MAC addresses: Up to 64,000
  • IPv4 routes: Up to 192,000
  • Memory: 16 GB DRAM, 18 GB flash; SSD capacity up to 240 GB
  • VLAN IDs: 4094
  • Jumbo frames: 9216 bytes

Security

  • Security features: Secure Boot, image signing, Cisco Trust Anchor module, hardware ACLs, VXLAN and Cisco TrustSec segmentation

Management

  • Management options: Cisco Catalyst Center (on-premises), Cisco Meraki dashboard (cloud), CLI via console or SSH, NETCONF/RESTCONF with YANG

Power

  • Default power supply: PWR-C2-500WAC (500 W AC)
  • Power supply slots: 3 hot-swappable bays; one supply included
  • Input voltage: AC 100 to 230 V
  • StackPower: StackPower+ supported (up to 4 switches in a StackPower+ ring)
  • Cooling: Three field-replaceable fan modules (N+1 redundancy), front-to-back airflow

Physical

  • Dimensions (W x D x H): 445 x 472 x 44 mm chassis only; 445 x 510 x 44 mm with 500 W power supply
  • Weight: 8 kg with default power supply
  • Mounting: 19-inch rack (brackets included) or table/shelf; 1RU
  • MTBF: 261,150 hours

Environment

  • Operating temperature: -5 to +50 °C at sea level; -5 to +45 °C up to 1,830 m; -5 to +40 °C up to 3,050 m (minimum 0 °C for cold start)
  • Storage temperature: -40 to +75 °C
  • Relative humidity: 10% to 95%, non-condensing

Warranty

  • Manufacturer warranty: Cisco Limited Lifetime Warranty (LLW): for as long as the original customer owns the product; replacement part shipped the next business day after a valid RMA, using commercially reasonable efforts
  • Cisco C9350 Series Smart Switch (ships with one default power supply)
  • AC power cord
  • Two 19-inch rack-mount brackets with screws
  • Four rubber mounting feet
  • Cable guide
  • Ground lug screw and ring terminal
  • Documentation pointer card and compliance document

UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.

Cisco C9350 Series Smart Switch, 48-Port 10G Multigigabit Data, Modular Uplinks (C9350-48TX)
Cisco C9350 Series Smart Switch, 48-Port 10G Multigigabit Data, Modular Uplinks (C9350-48TX) £8,235.00 Exc VAT · Low stock
Trade pricing availableNext-day UK dispatchGenuine UK stockProject quote supportSecure checkoutExpert pre-sales advice

Customer reviews

★ We're on Trustpilot Bought from us? An honest review helps other installers and IT teams choose. Review us on Trustpilot

Built for B2B buying

From product selection to deployment, this is made for real projects.

Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.

1Check compatibility
2Choose fulfilment
3Deploy with support
Trade quote ready Send your basket for quantity pricing and project supply checks.
Same basket support Add licences, mounts, switches, storage or accessories with confidence.
Cisco C9350 Series Smart Switch, 48-Port 10G Multigigabit Data, Modular Uplinks (C9350-48TX)
Need fit advice? Ask before checkout and avoid wrong-spec purchases.

Why choose us

Procurement that feels fast, clear and trade-ready.

Every product page is designed to help you move from shortlist to checkout with fewer unknowns.

Genuine UK stock New, boxed products sourced through official UK distribution.
Project help Ask for fit checks, renewal advice and quantity pricing.
Fast dispatch Choose UK delivery options for urgent deployments.
Secure checkout Order online or speak to the team for larger baskets.

Common questions

Product and order FAQs

Can I request trade or bulk pricing?

Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.

How quickly can this be delivered?

Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.

Can you help confirm compatibility?

Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.

Do you supply renewals and supporting accessories?

CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.