Cisco
C9120AXI-ECisco Catalyst 9120AXI Wi-Fi 6 Access Point, 4x4:4 Flexible Radio, 2.5G mGig, -E Domain (C9120AXI-E)
The Cisco Catalyst 9120AXI Wi-Fi 6 Access Point, 4x4:4 Flexible Radio, 2.5G mGig, -E Domain (C9120AXI-E) is a genuine Cisco product, supplied new and boxed through official UK distribution. It provides the Wi-Fi coverage that laptops, phones and wireless devices connect to.
The Cisco Catalyst 9120AXI is a Wi-Fi 6 (802.11ax) indoor access point from the Catalyst 9100 family for enterprise offices, education and other busy sites running controller-managed Cisco wireless. The AXI version has internal antennas; the 9120AXE and 9120AXP are the external-antenna versions.
It has two 4x4 radios with four spatial streams: one dedicated to 5 GHz and one flexible radio that serves either 2.4 GHz or 5 GHz, so the unit can run as a dual 5 GHz access point. PHY data rates reach 5.38 Gbps. Cisco's RF ASIC adds a software-defined radio for CleanAir spectrum analysis, wIPS and DFS detection. The uplink is 2.5 Gbps multigigabit Ethernet and full operation needs 802.3at PoE+ (25.5 W maximum).
The "-E" in the part number is the regulatory domain, which fixes the channels and power levels the radios may use; Cisco's wireless compliance lookup lists the United Kingdom under the -E domain for this model. It is managed by a Cisco Catalyst 9800 Series wireless controller (earlier AireOS controllers are also supported) and needs a Cisco DNA Essentials or Advantage subscription licence when used with Catalyst 9800 controllers and Catalyst Center.
What the Cisco C9120AXI-E is used for
- Controller-managed Wi-Fi 6 access point for enterprise offices and education sites, with two 4x4 radios and PHY data rates up to 5.38 Gbps
- Running dual 5 GHz coverage in busy areas, since its flexible radio can serve either 2.4 GHz or 5 GHz
- Ceiling or wall mounting on a 2.5 Gbps multigigabit uplink, powered from an 802.3at PoE+ switch port
- Spectrum analysis alongside client service, using the Cisco RF ASIC for CleanAir, wIPS and DFS detection
Cisco C9120AXI-E: common questions
Does the C9120AXI-E need a wireless controller?
Yes. It ships in Catalyst (controller) mode and is managed by a Cisco Catalyst 9800 Series wireless controller. Cisco 3500, 5520 and 8540 Series controllers and the Cisco Virtual Wireless Controller are also supported.
Is a licence needed for the Catalyst 9120AXI?
Yes. A Cisco DNA subscription licence, Essentials or Advantage, is required when it is used with Catalyst 9800 controllers and Cisco Catalyst Center. The licence comes in 3-, 5- or 7-year terms.
How is the 9120AXI powered, and is a PoE injector included?
It needs 802.3at PoE+ for full operation and draws 25.5 W at most. No injector is in the box; the Cisco AIR-PWRINJ6= injector is sold separately. On 802.3af it runs in a reduced mode at up to 13.4 W.
What does the -E in the part number mean?
It is the regulatory domain code set at the factory, which decides the channels and power levels the radios may use. The United Kingdom is listed under the -E domain for this model.
What warranty comes with this access point?
A Cisco limited lifetime hardware warranty, for as long as the original end user owns or uses the product, with 10-day advance hardware replacement.
See all Cisco products or wireless access points from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- Wi-Fi 6 (802.11ax) with uplink/downlink OFDMA, MU-MIMO, BSS colouring and Target Wake Time
- Two 4x4:4 radios: dedicated 5 GHz plus a flexible radio for 2.4 GHz or 5 GHz (dual 5 GHz mode)
- PHY data rates up to 5.38 Gbps; 20, 40, 80 and 160 MHz channels
- Cisco RF ASIC: software-defined radio for CleanAir, wIPS and DFS detection
- 1 x 100/1000/2500 Mbps multigigabit Ethernet uplink (IEEE 802.3bz), RJ-45 console port and USB 2.0 (4.5 W)
- 802.3at PoE+ for full operation, 25.5 W maximum; reduced operation on 802.3af at 13.4 W
- Internal omnidirectional antennas: 4 dBi peak gain at 2.4 GHz, 5 dBi at 5 GHz
- Integrated Bluetooth Low Energy 5 radio
- -E regulatory domain version; Cisco DNA subscription licence needed with Catalyst 9800 and Catalyst Center
- Cisco limited lifetime hardware warranty with 10-day advance replacement
General
- Wi-Fi standard: Wi-Fi 6 (802.11ax)
- Power over Ethernet: PoE+ (802.3at)
- Cellular: 5G
- Product type: Indoor access point with internal antennas
- Wi-Fi generation: Wi-Fi 6 (802.11ax)
- Part number suffix: -E is the regulatory domain code set at the factory. Cisco's wireless compliance lookup lists the United Kingdom under the -E domain for this model; use the lookup to confirm other countries.
- Management mode as shipped: Catalyst (controller) mode, for Catalyst 9800 Series wireless controllers
- System memory: 2048 MB DRAM, 1024 MB flash
- Licensing: Cisco DNA subscription licence (Essentials or Advantage; 3-, 5- or 7-year term) is required when the access point is used with Catalyst 9800 controllers and Cisco Catalyst Center, per the Cisco Wireless Ordering Guide.
- Part number: C9120AXI-E
- Brand: Cisco
- EAN: 889728227674
Wireless
- Wi-Fi standards: IEEE 802.11a/b/g/n/ac/ax
- Frequency bands: 2.4 GHz and 5 GHz
- Radios and spatial streams: Dedicated 5 GHz radio: 4x4, four spatial streams; flexible radio (2.4 GHz or 5 GHz): 4x4, four spatial streams
- Maximum data rate: PHY data rates up to 5.38 Gbps (160 MHz on 5 GHz and 20 MHz on 2.4 GHz)
- Channel widths: 20, 40, 80 and 160 MHz
- Antennas: Internal, omnidirectional in azimuth; flexible radio 4 dBi (2.4 GHz) or 5 dBi (5 GHz) peak gain; dedicated 5 GHz radio 5 dBi
- Bluetooth / IoT radio: Integrated Bluetooth Low Energy (BLE) 5
- RF analysis: Cisco RF ASIC software-defined radio: Cisco CleanAir, wIPS and DFS detection
- Maximum transmit power: 23 dBm (200 mW) on 2.4 GHz and on 5 GHz
Ports
- Ethernet uplink: 1 x 100/1000/2500 Mbps multigigabit Ethernet (RJ-45), IEEE 802.3bz, auto-MDIX
- Console port: RJ-45 management console port
- USB: 1 x USB 2.0, 4.5 W
Power
- PoE requirement: 802.3at PoE+ for full operation (4x4 on both radios, 2.5G link, USB on); 802.3bt Cisco UPOE also accepted
- Power draw: 25.5 W maximum on 802.3at; 13.4 W maximum on 802.3af
- Reduced-power operation: On 802.3af: both radios at 1x1, or a single radio at 2x2; 1G uplink; USB off
- Other power options: Cisco power injector AIR-PWRINJ6= (802.3at) or AIR-PWRINJ5= (802.3af), sold separately
Management
- Management options: Cisco Catalyst 9800 Series wireless controllers; Cisco 3500, 5520 and 8540 Series wireless controllers and Cisco Virtual Wireless Controller
- Minimum software: Cisco IOS XE 16.11 with AP Device Pack, or later; Cisco Unified Wireless Network Software 8.9.x or later
Security
- Wireless security: WPA3, WPA2 (802.11i), 802.1X, AES; EAP-TLS, EAP-TTLS, PEAP, EAP-FAST and EAP-SIM
- Platform security: Image signing, Secure Boot and the Cisco Trust Anchor module
Physical
- Dimensions (W x D x H): 216 x 216 x 43 mm (21.6 x 21.6 x 4.3 cm), without mounting bracket
- Weight: 1.3 kg
- Mounting: Suspended ceiling, hard ceiling or wall, electrical or network box, or above a suspended ceiling; bracket AIR-AP-BRACKET-1 (default) or AIR-AP-BRACKET-2
Environment
- Operating temperature: 0 to 50°C; above 40°C ambient the radios drop from 4x4 to 2x2 and the uplink to 1 Gigabit Ethernet
- Storage temperature: -30 to 70°C
- Operating humidity: 10% to 90% (non-condensing)
Warranty
- Manufacturer warranty: Cisco limited lifetime hardware warranty, for as long as the original end user owns or uses the product; 10-day advance hardware replacement; software media warranted for 90 days.
- Cisco Catalyst 9120AXI access point
- Mounting bracket (as selected when the access point was ordered)
- Adjustable ceiling-rail clip (as selected when the access point was ordered)
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
