Cisco
C9130AXI-ECisco Catalyst 9130AXI Wi-Fi 6 Access Point, 8x8 5 GHz + 4x4 2.4 GHz, 5G mGig, -E Domain (C9130AXI-E)
The Cisco Catalyst 9130AXI Wi-Fi 6 Access Point, 8x8 5 GHz + 4x4 2.4 GHz, 5G mGig, -E Domain (C9130AXI-E) is a genuine Cisco product, supplied new and boxed through official UK distribution. It provides the Wi-Fi coverage that laptops, phones and wireless devices connect to.
The Cisco Catalyst 9130AXI is the high-density Wi-Fi 6 (802.11ax) indoor access point in the Catalyst 9100 family, aimed at large offices, lecture theatres and other spaces with many clients on controller-managed Cisco wireless. The AXI version has internal antennas.
By default it runs an 8x8 5 GHz radio alongside a 4x4 2.4 GHz radio; in tri-radio mode the 8x8 radio is split by software into two 4x4 5 GHz radios while 2.4 GHz stays active. PHY data rates reach 5.38 Gbps. The uplink is multigigabit Ethernet up to 5 Gbps. 802.3at PoE+ (25.5 W) runs 8x8 without USB; 802.3bt Cisco UPOE (30.5 W) runs 8x8 with the USB port powered. Cisco's RF ASIC provides CleanAir, wIPS, FastLocate and DFS detection.
The "-E" in the part number is the regulatory domain, which fixes the channels and power levels the radios may use; Cisco's wireless compliance lookup lists the United Kingdom under the -E domain for this model. It is managed by a Cisco Catalyst 9800 Series wireless controller (earlier AireOS controllers are also supported) and needs a Cisco DNA Essentials or Advantage subscription licence when used with Catalyst 9800 controllers and Catalyst Center.
What the Cisco C9130AXI-E is used for
- High-density Wi-Fi 6 access point for large offices and lecture theatres, with an 8x8 5 GHz radio alongside a 4x4 2.4 GHz radio
- Splitting the 8x8 radio into two 4x4 5 GHz radios in tri-radio mode while 2.4 GHz stays active, for spaces with many clients
- Controller-managed Cisco wireless on a multigigabit uplink of up to 5 Gbps, powered by 802.3at PoE+ or 802.3bt Cisco UPOE
Cisco C9130AXI-E: common questions
What PoE does the C9130AXI-E need?
802.3at PoE+ at up to 25.5 W runs the 8x8 5 GHz radio with the USB port off. 802.3bt Cisco UPOE at up to 30.5 W runs 8x8 with the USB port on. On 802.3af both radios drop to 1x1 and the uplink to 1G.
Does the Catalyst 9130AXI need a wireless controller?
Yes. It ships in Catalyst (controller) mode for Catalyst 9800 Series wireless controllers. Cisco 3504, 5520 and 8540 wireless controllers and the Cisco Virtual Wireless Controller are also supported.
Is a subscription licence required?
Yes. A Cisco DNA subscription licence, Essentials or Advantage, is required when the access point is used with Catalyst 9800 controllers and Cisco Catalyst Center. Terms are 3, 5 or 7 years.
Which country version is the -E model?
The -E suffix is the regulatory domain code set at the factory. The United Kingdom is listed under the -E domain for this model; other countries should be confirmed before ordering.
What ports does the 9130AXI have?
One multigigabit Ethernet RJ-45 uplink that links at 100, 1000, 2500 or 5000 Mbps, an RJ-45 console port and one USB 2.0 port rated at 4.5 W.
See all Cisco products or wireless access points from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- Wi-Fi 6 (802.11ax) with uplink/downlink OFDMA and MU-MIMO, BSS colouring and Target Wake Time
- Dual-radio mode: 8x8 5 GHz and 4x4 2.4 GHz; tri-radio mode: two 4x4 5 GHz radios plus 4x4 2.4 GHz
- Up to eight spatial streams; PHY data rates up to 5.38 Gbps
- 1 x 100/1000/2500/5000 Mbps multigigabit Ethernet uplink, RJ-45 console port and USB 2.0 (4.5 W)
- 802.3at PoE+ at 25.5 W maximum, or 802.3bt Cisco UPOE at 30.5 W for 8x8 with USB
- Cisco RF ASIC: CleanAir, wIPS, FastLocate and DFS detection
- Internal omnidirectional antennas: 4 dBi peak gain at 2.4 GHz, 6 dBi at 5 GHz
- Integrated Bluetooth Low Energy 5 radio
- -E regulatory domain version; Cisco DNA subscription licence needed with Catalyst 9800 and Catalyst Center
- Cisco limited lifetime hardware warranty with 10-day advance replacement
General
- Wi-Fi standard: Wi-Fi 6 (802.11ax)
- Power over Ethernet: PoE++ (802.3bt)
- Cellular: 5G
- Product type: Indoor access point with internal antennas
- Wi-Fi generation: Wi-Fi 6 (802.11ax)
- Part number suffix: -E is the regulatory domain code set at the factory. Cisco's wireless compliance lookup lists the United Kingdom under the -E domain for this model; use the lookup to confirm other countries.
- Management mode as shipped: Catalyst (controller) mode, for Catalyst 9800 Series wireless controllers
- System memory: 2048 MB DRAM, 1024 MB flash
- Licensing: Cisco DNA subscription licence (Essentials or Advantage; 3-, 5- or 7-year term) is required when the access point is used with Catalyst 9800 controllers and Cisco Catalyst Center, per the Cisco Wireless Ordering Guide.
- Part number: C9130AXI-E
- Brand: Cisco
- EAN: 889728246132
Wireless
- Wi-Fi standards: IEEE 802.11a/b/g/n/ac/ax
- Frequency bands: 2.4 GHz and 5 GHz
- Radios and spatial streams: Dual-radio mode (default): 8x8 5 GHz, eight spatial streams, and 4x4 2.4 GHz; tri-radio mode: two 4x4 5 GHz radios and 4x4 2.4 GHz
- Maximum data rate: PHY data rates up to 5.38 Gbps (8x8 80 MHz or dual 4x4 80+80 MHz on 5 GHz, and 4x4 20 MHz on 2.4 GHz)
- Channel widths: 20, 40, 80 and 160 MHz
- Antennas: Internal, omnidirectional in azimuth; peak gain 4 dBi (2.4 GHz) and 6 dBi (5 GHz)
- Bluetooth / IoT radio: Integrated Bluetooth Low Energy (BLE) 5
- RF analysis: Cisco RF ASIC software-defined radio: Cisco CleanAir, wIPS, FastLocate and DFS detection
- Maximum transmit power: 23 dBm (200 mW) on 2.4 GHz; 26 dBm (400 mW) on 5 GHz
Ports
- Ethernet uplink: 1 x 100/1000/2500/5000 Mbps multigigabit Ethernet (RJ-45)
- Console port: RJ-45 management console port
- USB: 1 x USB 2.0, 4.5 W
Power
- PoE requirement: 802.3at PoE+: 4x4 2.4 GHz with 8x8 5 GHz (USB off) or 4x4 5 GHz (USB on), 5G link. 802.3bt Cisco UPOE: 8x8 5 GHz with USB on
- Power draw: 25.5 W maximum on 802.3at; 30.5 W maximum on 802.3bt (Cisco UPOE); 13.4 W maximum on 802.3af
- Reduced-power operation: On 802.3af both radios run at 1x1, the uplink at 1G and the USB port is off
- Other power options: Cisco power injector AIR-PWRINJ6= or AIR-PWRINJ5= (802.3af only), sold separately
Management
- Management options: Cisco Catalyst 9800 Series wireless controllers; Cisco 3504, 5520 and 8540 wireless controllers and Cisco Virtual Wireless Controller
- Minimum software: Cisco IOS XE 16.12.1 with AP Device Pack, or later; Cisco Unified Wireless Network Software 8.10.x or later
Security
- Wireless security: WPA3, WPA2 (802.11i), 802.1X, AES; EAP-TLS, EAP-TTLS, PEAP, EAP-FAST and EAP-SIM
- Platform security: Image signing, Secure Boot and the Cisco Trust Anchor module
Physical
- Dimensions (W x D x H): 226 x 226 x 48 mm (22.6 x 22.6 x 4.8 cm), without mounting bracket
- Weight: 1.45 kg
- Mounting: Suspended ceiling, hard ceiling or wall, electrical or network box, or above a suspended ceiling; bracket AIR-AP-BRACKET-1 (default) or AIR-AP-BRACKET-2
Environment
- Operating temperature: 0 to 50°C; above 40°C ambient the 5 GHz radio drops from 8x8 to 4x4 and the uplink to 1 Gigabit Ethernet
- Storage temperature: -30 to 70°C
- Operating humidity: 10% to 90% (non-condensing)
Warranty
- Manufacturer warranty: Cisco limited lifetime hardware warranty, for as long as the original end user owns or uses the product; 10-day advance hardware replacement; software media warranted for 90 days.
- Cisco Catalyst 9130AXI access point
- Mounting bracket AIR-AP-BRACKET-1= (default) or AIR-AP-BRACKET-2= (only if selected when the access point was ordered)
- Adjustable ceiling-rail clip AIR-AP-T-RAIL-R or AIR-AP-T-RAIL-F (as selected when the access point was ordered)
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
