Cisco
CW9162I-ROWCisco Catalyst 9162I Wi-Fi 6E Access Point, Tri-Band 2x2:2, 2.5G mGig, -ROW Domain (CW9162I-ROW)
The Cisco Catalyst 9162I Wi-Fi 6E Access Point, Tri-Band 2x2:2, 2.5G mGig, -ROW Domain (CW9162I-ROW) is a genuine Cisco product, supplied new and boxed through official UK distribution. It provides the Wi-Fi coverage that laptops, phones and wireless devices connect to.
The Cisco Catalyst 9162I is a tri-band Wi-Fi 6E indoor access point for small and medium-sized deployments, adding the 6 GHz band to 2.4 GHz and 5 GHz. It suits offices, shops and branch sites that want 6 GHz capacity from a compact unit, and it can be managed either on-premises by a Catalyst 9800 controller or in the cloud from the Meraki dashboard.
It has three 2x2 radios, one per band, for six spatial streams and PHY data rates up to 3.9 Gbps, with internal omnidirectional antennas. The uplink is 2.5 Gbps multigigabit Ethernet. All radios run at full strength on 802.3at PoE+ (25.5 W maximum), and a 12 V DC input is provided as an alternative. Bluetooth Low Energy 5.1 and a 4.5 W USB port are built in.
The "-ROW" part number is the controller-managed version in Cisco's Rest of World regulatory domain: it joins a Catalyst 9800 controller and takes its channel and power settings from the country code assigned there. Cisco's compliance lookup lists the United Kingdom under -ROW for this model. It can later be migrated to Meraki dashboard management. Licensing is by Cisco Networking Subscription (Wireless Essentials or Advantage) or Cisco DNA licences; Meraki management needs a Meraki licence.
What the Cisco CW9162I-ROW is used for
- Tri-band Wi-Fi 6E access point for offices, shops and branch sites that want 6 GHz capacity from a compact unit
- Serving 2.4 GHz, 5 GHz and 6 GHz clients from three 2x2 radios at PHY data rates up to 3.9 Gbps
- Joining a Catalyst 9800 controller on-premises, with the option to move to Meraki dashboard management later
- Ceiling, wall or desk placement on a 2.5G multigigabit uplink, powered by 802.3at PoE+ or a 12 V DC input
Cisco CW9162I-ROW: common questions
Does the CW9162I-ROW need a controller?
Yes. The -ROW version ships in Catalyst (controller) mode and joins a Catalyst 9800 Series wireless controller, physical or virtual. A later move to Meraki dashboard management is possible.
What licence does the Catalyst 9162I need?
Wireless Essentials or Advantage licences in a Cisco Networking Subscription, or Cisco DNA Essentials or Advantage licences. Management from the Meraki dashboard needs a Meraki licence instead.
Can the 9162I -ROW version be used in the UK?
Yes. -ROW is the Rest of World regulatory domain and the United Kingdom is listed under it for this model. The country code is assigned from the Catalyst 9800 controller at deployment.
How is it powered, and is a power supply included?
802.3at PoE+ runs all three radios at 2x2 with a 2.5G link, drawing 25.5 W at most, and a 12 V DC input is the alternative. No power supply or injector is in the box; both are sold separately.
Is a mounting bracket in the box?
Yes. The low-profile bracket AIR-AP-BRACKET-1= and the adjustable ceiling-rail clip AIR-AP-T-RAIL-R are the default options supplied with the access point.
See all Cisco products or wireless access points from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- Wi-Fi 6E (802.11ax) tri-band: 2.4 GHz, 5 GHz and 6 GHz
- Three 2x2:2 radios, six spatial streams, PHY data rates up to 3.9 Gbps
- 6 GHz channels up to 160 MHz wide; 5 GHz up to 80 MHz
- 1 x 100M/1000M/2.5G multigigabit Ethernet uplink, RJ-45 console port and USB 2.0 (4.5 W)
- Full operation on 802.3at PoE+, 25.5 W maximum; 12 V DC input as an alternative
- Integrated Bluetooth Low Energy 5.1 radio; Cisco CleanAir Pro interference detection
- Internal omnidirectional antennas: 4 dBi (2.4 GHz), 5 dBi (5 GHz), 5 dBi (6 GHz)
- Managed by Catalyst 9800 controller or Meraki dashboard; management mode can be changed later
- -ROW (Rest of World) regulatory domain; country code assigned from the Catalyst 9800 controller
- Cisco limited lifetime hardware warranty with 5-day advance replacement
General
- Wi-Fi standard: Wi-Fi 6E
- Power over Ethernet: PoE+ (802.3at)
- Cellular: 5G
- Product type: Indoor access point with internal antennas
- Wi-Fi generation: Wi-Fi 6E (802.11ax in the 2.4, 5 and 6 GHz bands)
- Part number suffix: -ROW is Cisco's Rest of World regulatory domain, in the controller-managed version. The country code is assigned from the Catalyst 9800 controller at deployment. Cisco's compliance lookup lists the UK under -ROW.
- Management mode as shipped: Catalyst (controller) mode, for Catalyst 9800 Series wireless controllers
- System memory: 2048 MB DRAM, 1024 MB flash
- Licensing: Two options per Cisco: Wireless Essentials or Advantage licences in a Cisco Networking Subscription, or Cisco DNA Essentials or Advantage (3-, 5- or 7-year term). Meraki dashboard management needs a Meraki licence.
- Part number: CW9162I-ROW
- Brand: Cisco
- EAN: 889728464253
Wireless
- Wi-Fi standards: IEEE 802.11a/b/g/n/ac/ax
- Frequency bands: 2.4 GHz, 5 GHz and 6 GHz
- Radios and spatial streams: Three radios, six spatial streams in total: 2.4 GHz 2x2, 5 GHz 2x2 and 6 GHz 2x2
- Maximum data rate: PHY data rates up to 3.9 Gbps (2x2 160 MHz on 6 GHz, 2x2 80 MHz on 5 GHz and 2x2 20 MHz on 2.4 GHz)
- Channel widths: 6 GHz: 20, 40, 80 and 160 MHz; 5 GHz: 20, 40 and 80 MHz; 2.4 GHz: 20 MHz
- Antennas: Internal, omnidirectional in azimuth; peak gain 4 dBi (2.4 GHz), 5 dBi (5 GHz) and 5 dBi (6 GHz)
- Bluetooth / IoT radio: Integrated Bluetooth Low Energy (BLE) 5.1
- RF analysis: Cisco CleanAir Pro interference detection and classification, extended to the 6 GHz band
- Maximum transmit power: 20 dBm (100 mW) on each of the 2.4, 5 and 6 GHz bands
- 6 GHz operation: Low power indoor (LPI). Where 6 GHz use is not permitted or not yet supported in software, the 6 GHz radio is disabled
Ports
- Ethernet uplink: 1 x 100M/1000M/2.5G multigigabit Ethernet (RJ-45)
- Console port: RJ-45 management console port
- USB: 1 x USB 2.0, 4.5 W
Power
- PoE requirement: 802.3at PoE+ or 802.3bt (Cisco UPOE) for full operation: all three radios at 2x2, 2.5G link, USB on
- Power draw: 25.5 W maximum on 802.3at or 802.3bt; 13.3 W maximum on 802.3af
- Reduced-power operation: On 802.3af the 2.4 GHz radio is off, the 5 GHz and 6 GHz radios run at 1x1, the uplink at 1G and USB is off
- Other power options: 12 V DC input (30 W power supply MA-PWR-30W); Cisco power injectors AIR-PWRINJ7=, AIR-PWRINJ6= or MA-INJ-6; all sold separately
Management
- Management options: Cisco Catalyst 9800 Series wireless controller (on-premises) or Cisco Meraki dashboard (cloud); the management mode can be changed after deployment
- Supported controllers: Cisco Catalyst 9800 Series wireless controllers (physical or virtual)
- Minimum software: Cisco IOS XE 17.9.2 / 17.10.1 or later
Security
- Wireless security: WPA3-Personal and WPA3-Enterprise, WPA2-Personal and WPA2-Enterprise with 802.1X, WPA3 Enhanced Open (OWE), AES
- Platform security: Image signing, Secure Boot and the Cisco Trust Anchor module
- Certifications: Wi-Fi Alliance: Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security
Physical
- Dimensions (W x D x H): 200 x 200 x 44.45 mm, without mounting bracket
- Weight: 0.93 kg
- Mounting: Suspended ceiling, hard ceiling, wall, electrical or network box, above a suspended ceiling, or desk; bracket AIR-AP-BRACKET-1 or AIR-AP-BRACKET-2
Environment
- Operating temperature: 0 to 50°C
- Storage temperature: -30 to 70°C
- Operating humidity: 10% to 90% (non-condensing)
Warranty
- Manufacturer warranty: Cisco limited lifetime hardware warranty, for as long as the original end user owns or uses the product; 5-day advance hardware replacement; software media warranted for 90 days.
- Cisco Catalyst 9162I access point
- Low-profile mounting bracket AIR-AP-BRACKET-1= (default option)
- Adjustable ceiling-rail clip AIR-AP-T-RAIL-R (default option)
- Cisco product documentation and pointer card
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
