Cisco
CW9166I-MRCisco Catalyst 9166I Wi-Fi 6E Access Point, Tri-Band 4x4:4, 5G mGig, Meraki Mode (CW9166I-MR)
The Cisco Catalyst 9166I Wi-Fi 6E Access Point, Tri-Band 4x4:4, 5G mGig, Meraki Mode (CW9166I-MR) is a genuine Cisco product, supplied new and boxed through official UK distribution. It provides the Wi-Fi coverage that laptops, phones and wireless devices connect to.
The Cisco Catalyst 9166I is the top indoor model in the Catalyst 9160 Wi-Fi 6E range, built for dense, business-critical wireless in large offices, campuses and public spaces. It adds the 6 GHz band to 2.4 GHz and 5 GHz, and the same hardware can be managed on-premises by a Catalyst 9800 controller or in the cloud from the Cisco Meraki dashboard.
All three radios are 4x4 with four spatial streams, 12 in total, for PHY data rates up to 7.78 Gbps. The third is an XOR radio that serves 6 GHz or a second 5 GHz channel. The uplink is multigigabit Ethernet up to 5 Gbps. 802.3at PoE+ (25.5 W) runs every radio at 4x4; 802.3bt Cisco UPOE (30.5 W) also powers the USB port. Air quality, temperature and humidity sensors and Bluetooth Low Energy 5.1 are built in.
The "-MR" part number is the Meraki cloud-managed version: it boots in Meraki management mode and is configured from the Meraki dashboard. A Meraki access point licence is required to operate it, and Cisco's ordering guide states the same licence is needed to migrate an -MR unit to Catalyst 9800 controller management. In Meraki mode, Cisco Meraki documentation states that 802.3af PoE is not supported.
What the Cisco CW9166I-MR is used for
- Dense, business-critical wireless in large offices, campuses and public spaces, managed in the cloud from the Cisco Meraki dashboard
- Tri-band Wi-Fi 6E access point with three 4x4 radios and 12 spatial streams, for PHY data rates up to 7.78 Gbps
- Switching its XOR radio between 6 GHz and a second 5 GHz channel, over a multigigabit uplink of up to 5 Gbps
- Monitoring room conditions with built-in air quality, temperature and humidity sensors
Cisco CW9166I-MR: common questions
Do I need a licence to run the CW9166I-MR?
Yes. It ships in Meraki management mode and a Meraki access point licence is required to operate it with the Meraki dashboard.
Can the -MR version be managed by a Catalyst 9800 controller?
Yes, after migration. It boots in Meraki mode, and a migration path to Catalyst 9800 controller management is documented. The Meraki access point licence is also needed to migrate.
What PoE does the Catalyst 9166I need?
802.3at PoE+ at up to 25.5 W runs every radio at 4x4 with a 5 Gbps link; 802.3bt Cisco UPOE at up to 30.5 W also powers the USB port. 802.3af PoE is not supported in Meraki mode.
Is the mounting bracket included with the 9166I?
Yes. The -MR version is supplied with the AIR-AP-BRACKET-2 universal mounting bracket and an AIR-AP-T-RAIL-R T-rail mount attachment with five screws.
What happens where 6 GHz is not permitted?
The XOR radio switches to 5 GHz, giving dual 5 GHz operation. Where 6 GHz is allowed, it runs as low power indoor.
See all Cisco products or wireless access points from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- Wi-Fi 6E (802.11ax) tri-band: 2.4 GHz, 5 GHz and 6 GHz
- Three 4x4:4 radios, 12 spatial streams, PHY data rates up to 7.78 Gbps
- XOR radio serves 6 GHz or a second 5 GHz channel (dual 5 GHz operation)
- 1 x 100M/1000M/2.5G/5G multigigabit Ethernet uplink, RJ-45 console port and USB 2.0 (4.5 W)
- 802.3at PoE+ (25.5 W) runs all radios at 4x4; 802.3bt UPOE (30.5 W) adds USB; 54 V DC input
- Built-in air quality (TVOC), temperature and humidity sensors
- Integrated Bluetooth Low Energy 5.1 radio; Cisco CleanAir Pro on all three bands
- -MR version: boots in Meraki mode for the Meraki dashboard; Meraki access point licence required
- Universal mounting bracket AIR-AP-BRACKET-2 supplied with the -MR version
- Cisco limited lifetime hardware warranty with 5-day advance replacement
General
- Wi-Fi standard: Wi-Fi 6E
- Power over Ethernet: PoE++ (802.3bt)
- Cellular: 5G
- Product type: Indoor access point with internal omnidirectional antennas
- Wi-Fi generation: Wi-Fi 6E (802.11ax in the 2.4, 5 and 6 GHz bands)
- Part number suffix: -MR is the Meraki cloud-managed version: it boots in Meraki management mode and is managed from the Meraki dashboard. Cisco documents a migration path to Catalyst 9800 controller management.
- Management mode as shipped: Meraki mode, for the Cisco Meraki dashboard
- System memory: 2048 MB DRAM, 1024 MB flash
- Licensing: Ships in Meraki management mode: a Meraki access point licence is required to operate with the Meraki dashboard, and also to migrate the unit to Catalyst (Cisco DNA) management mode.
- Part number: CW9166I-MR
- Brand: Cisco
- EAN: 810087201906
Wireless
- Wi-Fi standards: IEEE 802.11a/b/g/n/ac/ax
- Frequency bands: 2.4 GHz, 5 GHz and 6 GHz
- Radios and spatial streams: Three radios, 12 spatial streams in total: 2.4 GHz 4x4, 5 GHz 4x4 and a 4x4 XOR radio serving 6 GHz or a second 5 GHz channel
- Maximum data rate: PHY data rates up to 7.78 Gbps (4x4 160 MHz on 6 GHz, 4x4 80 MHz on 5 GHz and 4x4 20 MHz on 2.4 GHz)
- Channel widths: 6 GHz: 20, 40, 80 and 160 MHz; 5 GHz: 20, 40, 80 and 80+80 MHz; 2.4 GHz: 20 MHz
- Antennas: Internal, omnidirectional in azimuth; peak gain 3 dBi (2.4 GHz), 5 dBi (5 GHz), 5 dBi (5 GHz XOR) and 4 dBi (6 GHz)
- Bluetooth / IoT radio: Integrated Bluetooth Low Energy (BLE) 5.1
- Environmental sensors: Built-in air quality (TVOC), temperature and humidity sensors
- RF analysis: Cisco CleanAir Pro interference detection and classification on the 2.4, 5 and 6 GHz bands
- Maximum transmit power: 23 dBm (200 mW) on each of the 2.4, 5 and 6 GHz bands
- 6 GHz operation: Low power indoor (LPI). Where 6 GHz use is not permitted or not yet supported, the XOR radio switches to 5 GHz (dual 5 GHz operation)
Ports
- Ethernet uplink: 1 x 100M/1000M/2.5G/5G multigigabit Ethernet (RJ-45)
- Console port: RJ-45 management console port
- USB: 1 x USB 2.0, 4.5 W
Power
- PoE requirement: 802.3at PoE+ runs all three radios at 4x4 with a 5 Gbps link and USB off; 802.3bt (Cisco UPOE) adds the USB port
- Power draw: 30.5 W maximum on 802.3bt (Cisco UPOE); 25.5 W maximum on 802.3at; 14.0 W on 802.3af
- Reduced-power operation: Cisco data sheet: 802.3af is for configuration staging only, all radios off. Meraki documentation: 802.3af PoE is not supported
- Other power options: 54 V DC input (power supply MA-PWR-50WAC); Cisco power injectors AIR-PWRINJ7=, AIR-PWRINJ6= or MA-INJ-6; all sold separately
Management
- Management options: Cisco Catalyst 9800 Series wireless controller (on-premises) or Cisco Meraki dashboard (cloud); the management mode can be changed after deployment
- Supported controllers: Cisco Catalyst 9800 Series wireless controllers (physical or virtual); Catalyst 9000 switches with Embedded Wireless Controller in SD-Access mode
- Minimum software: Cisco IOS XE 17.9.1 or later
Security
- Wireless security: WPA3-Personal and WPA3-Enterprise, WPA2-Personal and WPA2-Enterprise with 802.1X, WPA3 Enhanced Open (OWE), AES
- Platform security: Image signing, Secure Boot and the Cisco Trust Anchor module
- Certifications: Wi-Fi Alliance: Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security
Physical
- Dimensions (W x D x H): 241.3 x 241.3 x 56.9 mm, without mounting bracket
- Weight: 1.60 kg
- Mounting: Suspended ceiling, hard ceiling, wall, electrical or network box, above a suspended ceiling, or desk; bracket AIR-AP-BRACKET-1 or AIR-AP-BRACKET-2
Environment
- Operating temperature: 0 to 50°C
- Storage temperature: -30 to 70°C
- Operating humidity: 10% to 90% (non-condensing)
Warranty
- Manufacturer warranty: Cisco limited lifetime hardware warranty, for as long as the original end user owns or uses the product; 5-day advance hardware replacement; software media warranted for 90 days.
- Cisco Catalyst 9166I cloud-managed access point
- Cisco universal mounting bracket AIR-AP-BRACKET-2
- T-rail mount attachment AIR-AP-T-RAIL-R with five 6-32 x 1/4 in. screws
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
