Cisco
C9200-24T-ECisco Catalyst 9200 24-Port Gigabit Data Switch, Modular Uplinks, Network Essentials (C9200-24T-E)
The Cisco Catalyst 9200 24-Port Gigabit Data Switch, Modular Uplinks, Network Essentials (C9200-24T-E) is a genuine Cisco product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.
The Cisco Catalyst 9200 is the modular-uplink member of the Catalyst 9200 Series: a stackable enterprise access switch running Cisco IOS XE with Layer 3 capability, field-replaceable power supplies and fans. It suits branch and campus wiring closets that need Gigabit copper connections for wired devices without PoE.
This model has 24 10/100/1000 data ports with no PoE and one uplink module slot that takes a 4 x 1G SFP (C9200-NM-4G) or 4 x 1/10G SFP+ (C9200-NM-4X) network module; the module is chosen separately. It ships with one PWR-C6-125WAC power supply, and a second can be added for redundancy. Up to eight C9200 switches stack over StackWise-160 (160 Gbps) using the optional stack kit.
The -E suffix means the switch carries the perpetual Network Essentials licence, which covers Layer 2 switching, static routing and routed access (RIP, EIGRP stub, OSPF up to 1,000 routes), PIM stub multicast, VRRP, QoS, 802.1X and MACsec-128. Full EIGRP and OSPF, HSRP, IS-IS, IP SLA and segmentation with VRF, VXLAN, LISP and SGT need the Network Advantage (-A) version. For new orders Cisco also requires a Cisco Catalyst or Cisco DNA subscription licence of the same tier (3, 5 or 7 years); this subscription is a separate item and is not part of the switch part number.
What the Cisco C9200-24T-E is used for
- Gigabit copper connections for 24 wired devices in a branch or campus wiring closet where PoE is not needed
- An enterprise access switch on Cisco IOS XE with field-replaceable fans and a second power supply slot for redundancy
- Fibre uplinks chosen to suit the site through one module slot: 4 x 1G SFP or 4 x 1/10G SFP+
- Stacking up to 8 C9200 switches at 160 Gbps over StackWise-160 using the optional stack kit
Cisco C9200-24T-E: common questions
Does the C9200-24T-E support PoE?
No. It is a data-only model; its 24 10/100/1000 ports do not supply power.
Are uplink ports included with the switch?
No. The uplink module is chosen separately. The single module slot takes a C9200-NM-4G (4 x 1G SFP) or a C9200-NM-4X (4 x 1/10G SFP+).
Which power supply does it ship with?
One PWR-C6-125WAC (125 W AC) power supply. There are 2 field-replaceable slots, so a second supply can be added for redundancy.
Is a Cisco DNA subscription included?
No. The switch carries the perpetual Network Essentials licence, but the Cisco Catalyst or Cisco DNA Essentials subscription (3, 5 or 7 year term) that Cisco requires with new switches is a separate item.
Is rack-mount hardware in the box?
Yes. Two 19-inch rack-mount brackets with screws are included, along with four rubber feet, a cable guide and a power cord retainer. The switch is 1RU.
See all Cisco products or network switches from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 24 x 10/100/1000 data ports, no PoE
- Modular uplink slot for C9200-NM-4G (4 x 1G SFP) or C9200-NM-4X (4 x 1/10G SFP+) network modules
- 128 Gbps switching capacity, 95.23 Mpps forwarding rate
- StackWise-160 stacking: up to 8 switches, 160 Gbps, with optional C9200-STACK-KIT
- Network Essentials licence: Layer 2, routed access (RIP, EIGRP stub, OSPF up to 1,000 routes), VRRP, 802.1X, MACsec-128
- Two field-replaceable power supply slots; default PWR-C6-125WAC (125 W AC)
- Managed by CLI, Web UI, Cisco Catalyst Center or Meraki dashboard cloud monitoring; NETCONF/RESTCONF
- 1RU, 5.0 kg; Cisco Enhanced Limited Lifetime Hardware Warranty
General
- Ports: 24 ports
- Power over Ethernet: PoE (802.3af)
- Ethernet: Gigabit
- Product type: Stackable managed Gigabit Ethernet access switch
- Series: Cisco Catalyst 9200 Series (C9200, modular uplinks)
- Switching layer: Layer 2 and Layer 3 (routed access; protocol support depends on licence)
- Operating system: Cisco IOS XE
- Licensing: Network Essentials perpetual licence (the -E suffix). Cisco requires a Cisco Catalyst or Cisco DNA Essentials subscription licence (3, 5 or 7 year term) to be ordered with new switches.
- Part number: C9200-24T-E
- Brand: Cisco
- EAN: 889728168229
Ports
- Downlink ports: 24 x 10/100/1000BASE-T RJ-45 (data only)
- Uplinks: One network module slot; modules: C9200-NM-4G (4 x 1G SFP) or C9200-NM-4X (4 x 1G/10G SFP+); C9200-NM-BLANK when no uplinks are fitted
- Stacking: StackWise-160: 160 Gbps, up to 8 switches, with optional C9200-STACK-KIT; stacks only with other C9200 models on the same licence level
- Management and console ports: RJ-45 Ethernet management port, RJ-45 console port, USB mini-Type B console port, USB Type A storage port
Power over Ethernet
- PoE: Not supported (data-only model)
Performance
- Switching capacity: 128 Gbps
- Forwarding rate: 95.23 Mpps (64-byte packets)
- Switching capacity with stacking: 288 Gbps
- Forwarding rate with stacking: 214 Mpps
- MAC addresses: 32,000
- IPv4 routes: 14,000 (10,000 direct and 4,000 indirect routes)
- Memory: 4 GB DRAM, 4 GB flash
- VLAN IDs: 4094
- Jumbo frames: 9198 bytes
- Packet buffer: 6 MB
Security
- Security features: IEEE 802.1X, IEEE 802.1AE MACsec (AES-128), Cisco Trust Anchor (Secure Boot, image signing)
- SD-Access: Supported (4 virtual networks)
Management
- Management options: CLI, Web UI, Cisco Catalyst Center, Meraki dashboard cloud monitoring, NETCONF/RESTCONF with YANG, SNMP v1/v2c/v3
- Other: Bluetooth dongle support for wireless console access, embedded RFID tag, blue beacon LED
Power
- Default power supply: PWR-C6-125WAC (125 W AC)
- Power supply slots: 2 field-replaceable; a second supply adds redundancy
- Input voltage: 100 to 240 V AC, 50 to 60 Hz
- Cooling: Field-replaceable redundant fans
Physical
- Dimensions (W x D x H): 445 x 350 x 44 mm chassis only; 445 x 391 x 44 mm with power supply and fan
- Weight: 5.0 kg
- Mounting: 19-inch rack (brackets included) or table/shelf; 1RU
- MTBF: 587,800 hours
Environment
- Operating temperature: -5 to +45 °C up to 1,500 m; -5 to +40 °C up to 3,000 m (minimum 0 °C for cold start)
- Storage temperature: -40 to +70 °C
- Relative humidity: 5% to 90%, non-condensing
Warranty
- Manufacturer warranty: Cisco Enhanced Limited Lifetime Hardware Warranty (E-LLW): for as long as the original customer owns the product, next-business-day replacement shipment where available, 90 days of 8x5 Cisco TAC support
- Catalyst 9200 Series switch (ships with one default power supply)
- AC power cord
- Two 19-inch rack-mount brackets with screws
- Four rubber mounting feet
- Cable guide
- Power cord retainer
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
