Cisco
C9300X-24Y-ECisco Catalyst 9300X 24-Port 1/10/25G SFP28 Fibre Switch, Modular Uplinks, Network Essentials (C9300X-24Y-E)
The Cisco Catalyst 9300X 24-Port 1/10/25G SFP28 Fibre Switch, Modular Uplinks, Network Essentials (C9300X-24Y-E) is a genuine Cisco product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.
The Cisco Catalyst 9300X-24Y is a stackable 1RU fibre switch from the Catalyst 9300 Series, built for campus aggregation, small-core and high-speed access roles where servers and access switches need 1G, 10G or 25G fibre links. It runs Cisco IOS XE with full Layer 3 capability.
It provides 24 SFP28 ports that each run at 25G, 10G or 1G, plus a slot for a Catalyst 9300X uplink module offering up to 100G uplinks. Switching capacity is 2,000 Gbps with a 1488 Mpps forwarding rate, and up to eight units stack at 1 Tbps with StackWise-1T. The UADP 2.0sec ASIC, 16 GB of DRAM and StackPower+ set the 9300X apart from the standard 9300; there is no PoE on this model.
The -E suffix means the switch carries the perpetual Network Essentials licence, which covers Layer 2 switching, routed access (RIP, EIGRP stub, OSPF up to 1,000 routes), PIM stub multicast, VRRP, QoS, 802.1X and MACsec-128. BGP, full EIGRP and OSPF, HSRP, IS-IS, VRF, VXLAN, MPLS, PTP and MACsec-256 need the Network Advantage (-A) version. For new orders Cisco also requires a Cisco Catalyst or Cisco DNA subscription licence of the same tier (3, 5 or 7 years); this subscription is a separate item and is not part of the switch part number.
What the Cisco C9300X-24Y-E is used for
- Aggregating access switches and servers over fibre through 24 SFP28 ports that each run at 1G, 10G or 25G
- A stackable switch for campus aggregation or a small core, with up to 8 units joined at 1 Tbps using StackWise-1T
- Routed access on the Network Essentials licence, covering RIP, EIGRP stub, OSPF up to 1,000 routes and VRRP
- Adding 100G/40G uplinks through the Catalyst 9300X network module slot, with the module ordered separately
Cisco C9300X-24Y-E: common questions
What licence comes with the C9300X-24Y-E?
The perpetual Network Essentials licence, shown by the -E suffix. New orders also need a Cisco Catalyst or Cisco DNA subscription licence at the same tier, on a 3, 5 or 7 year term; that subscription is a separate item and not part of this part number.
Does the C9300X-24Y-E support PoE?
No. It is a fibre model with 24 SFP28 ports and PoE is not supported.
Is an uplink module included with the switch?
No. The network module slot is empty as supplied. Catalyst 9300X modules such as the C9300X-NM-8Y (8 x 25G/10G/1G) or C9300X-NM-4C (4 x 100G/40G) are ordered separately.
How many Catalyst 9300X switches can be stacked?
Up to 8 switches at 1 Tbps with StackWise-1T, using StackWise cables. It also stacks with C9300 models at StackWise-480 speeds, provided they are on the same licence level.
Can it be rack mounted and what is in the box?
Yes. It is a 1RU switch supplied with two 19-inch rack-mount brackets, one 715 W AC power supply, three fans, an AC power cord, rubber feet and a cable guide.
See all Cisco products or network switches from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 24 x 25G/10G/1G SFP28 ports
- Uplink slot for Catalyst 9300X network modules up to 4 x 100G/40G (module ordered separately)
- 2,000 Gbps switching capacity, 1488 Mpps forwarding rate
- StackWise-1T stacking: up to 8 switches at 1 Tbps; StackPower+ power sharing
- Network Essentials licence: Layer 2, routed access (RIP, EIGRP stub, OSPF up to 1,000 routes), VRRP, 802.1X, MACsec-128
- 16 GB DRAM; 16 GB flash; x86 CPU with application hosting and optional USB 3.0 SSD storage
- Dual power supply bays, default PWR-C1-715WAC-P (715 W AC); three field-replaceable fans
- Managed by CLI, Web UI, Cisco Catalyst Center or Meraki dashboard
- 1RU, 7.35 kg; Cisco Enhanced Limited Lifetime Hardware Warranty
General
- Ports: 24 ports
- Product type: Stackable managed 25G/10G/1G fibre aggregation and access switch
- Series: Cisco Catalyst 9300 Series (C9300X, modular uplinks)
- Switching layer: Layer 2 and Layer 3 (protocol support depends on licence)
- Operating system: Cisco IOS XE
- Licensing: Network Essentials perpetual licence (the -E suffix). Cisco requires a Cisco Catalyst or Cisco DNA Essentials subscription licence (3, 5 or 7 year term) to be ordered with new switches.
- Part number: C9300X-24Y-E
- Brand: Cisco
- EAN: 889728362573
Ports
- Downlink ports: 24 x 25G/10G/1G SFP28
- Uplinks: One network module slot (module not included); C9300X modules: C9300X-NM-8Y (8 x 25G/10G/1G), C9300X-NM-8M (8 x 10G multigigabit), C9300X-NM-2C (2 x 100G/40G), C9300X-NM-4C (4 x 100G/40G)
- Stacking: StackWise-1T: 1 Tbps, up to 8 switches, using StackWise cables; also stacks with C9300 models at StackWise-480 speeds (same licence level)
- Management and console ports: RJ-45 Ethernet management port, RJ-45 console port, USB 2.0 port, USB 3.0 SSD storage slot
Power over Ethernet
- PoE: Not supported (fibre model)
Performance
- Switching capacity: 2,000 Gbps
- Forwarding rate: 1488 Mpps (64-byte packets)
- Switching capacity with stacking: 3,000 Gbps
- Forwarding rate with stacking: 2232 Mpps
- MAC addresses: 32,000
- IPv4 routes: 39,000 (24,000 direct and 15,000 indirect routes)
- Memory: 16 GB DRAM, 16 GB flash
- VLAN IDs: 4094
- Jumbo frames: 9198 bytes
- Packet buffer: 32 MB
Security
- Security features: IEEE 802.1X, MACsec AES-128 (AES-256 with Network Advantage), Secure Boot and Secure Unique Device Identification (SUDI); hardware IPsec up to 100G (HSEC key required)
Management
- Management options: CLI, Web UI, Cisco Catalyst Center, Meraki dashboard, SNMP v1/v2c/v3
- Programmability: NETCONF, RESTCONF, gRPC and YANG automation is listed by Cisco under Network Advantage, not Network Essentials
- Other: Application hosting on x86 CPU, embedded RFID tag, blue beacon LED
Power
- Default power supply: PWR-C1-715WAC-P (715 W AC)
- Power supply slots: 2 (dual redundant); one supply included
- Input voltage: 100 to 240 V AC, 50 to 60 Hz
- StackPower: StackPower+ supported
- Cooling: Three field-replaceable fans (N+1 redundancy)
Physical
- Dimensions (W x D x H): 445 x 447 x 44 mm chassis only; 445 x 488 x 44 mm with default power supply
- Weight: 7.35 kg with default power supply
- Mounting: 19-inch rack (brackets included) or table/shelf; 1RU
- MTBF: 249,350 hours
Environment
- Operating temperature: -5 to +45 °C up to 1,500 m; -5 to +40 °C up to 3,000 m (minimum 0 °C for cold start)
- Storage temperature: -40 to +70 °C
- Relative humidity: 5% to 90%, non-condensing
Warranty
- Manufacturer warranty: Cisco Enhanced Limited Lifetime Hardware Warranty (E-LLW): for as long as the original customer owns the product, next-business-day replacement shipment where available, 90 days of 8x5 Cisco TAC support
- Catalyst 9300 Series switch (ships with one default power supply and three fans)
- AC power cord
- Two 19-inch rack-mount brackets with screws
- Four rubber mounting feet
- Cable guide
- Ground lug screw and ring terminal
- Product documentation and compliance document
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
