Cisco
C1300-48P-4GCisco Catalyst 1300-48P-4G 48-Port Gigabit PoE+ Managed Switch, 375 W, 4 x 1G SFP (C1300-48P-4G)
The Cisco Catalyst 1300-48P-4G 48-Port Gigabit PoE+ Managed Switch, 375 W, 4 x 1G SFP (C1300-48P-4G) is a genuine Cisco product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.
The Cisco Catalyst 1300-48P-4G is a fixed, managed Layer 3 Gigabit Ethernet PoE+ switch from the Catalyst 1300 Series, designed for small and medium-sized businesses and branch offices. It connects and powers IP phones, wireless access points and IP cameras over a single cable, with dynamic routing, VLANs and security features to separate staff, guest and voice traffic.
The C1300-48P-4G provides 48 x 10/100/1000 PoE+ ports (30 W capable) sharing a 375 W power budget, and 4 x Gigabit SFP uplink slots, 52 Gigabit Ethernet ports in total. It has an internal power supply, is cooled by a single fan (37.3 dBA at 25°C) and is supplied with 19-inch rack brackets. Switching capacity is 104.0 Gbps with a forwarding rate of 77.38 Mpps.
It is managed with the Cisco Business Dashboard, the Cisco Business mobile app, the built-in web interface, a full CLI or SNMP, and supports Cisco Network Plug and Play. This model cannot be stacked; in the 1300 Series, Cisco supports stacking only on the models with 10G uplinks, multigigabit ports or 10G ports. Cisco's limited lifetime warranty with return-to-factory replacement applies.
What the Cisco C1300-48P-4G is used for
- Connecting and powering IP phones, wireless access points and IP cameras from a 48 port PoE switch with a 375 W budget
- A standalone managed Layer 3 switch for a small or medium-sized business or branch office
- Fibre uplinks through 4 Gigabit SFP slots, for 52 Gigabit Ethernet ports in total
- Separating staff, guest and voice traffic with VLANs, routing and security features
Cisco C1300-48P-4G: common questions
How much PoE power does the C1300-48P-4G provide?
375 W shared across its 48 PoE+ ports, with up to 30 W on any one port, so not every port can draw the full 30 W at once.
Can the C1300-48P-4G be stacked?
No. Stacking is not supported on this model. Within the Catalyst 1300 Series, only the models with 10G uplinks, multigigabit ports or 10G ports can be stacked.
Is it a Layer 3 switch?
Yes. It supports static routing, RIP v2 and policy-based routing, with up to 990 IPv4 routes and 128 IP interfaces.
How loud is the switch?
It is cooled by a single fan and rated at 37.3 dBA at 25°C.
Which SFP modules fit the uplink slots?
Cisco 1G modules including MGBSX1, MGBLX1, MGBLH1, MGBT1, GLC-SX-MMD, GLC-LH-SMD, GLC-EX-SMD, GLC-ZX-SMD, GLC-BX-U, GLC-BX-D and GLC-TE.
See all Cisco products or network switches from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 48 x 10/100/1000 PoE+ ports plus 4 x Gigabit SFP uplinks (52 Gigabit Ethernet ports in total)
- 375 W PoE budget across 48 ports; IEEE 802.3at PoE+ up to 30 W per port, plus 802.3af and Cisco legacy PoE
- 104.0 Gbps switching capacity and 77.38 Mpps forwarding rate; wire-speed and non-blocking
- Layer 3 with static routing, RIP v2 and policy-based routing; up to 990 IPv4 routes and 128 IP interfaces
- Standalone model: stacking is not supported
- Managed with Cisco Business Dashboard, Cisco Business mobile app, web interface, CLI or SNMP v1/v2c/v3
- Security: IEEE 802.1X, web authentication, DHCP snooping, IP Source Guard, Dynamic ARP Inspection, IPv6 First Hop Security
- 1 fan (37.3 dBA at 25°C), internal power supply; 444.3 x 350 x 43.94 mm, 5.43 kg
- Cisco limited lifetime warranty with return-to-factory replacement
General
- Ports: 48 ports
- Power over Ethernet: PoE+ (802.3at)
- Ethernet: Gigabit
- Series: Cisco Catalyst 1300 Series
- Switch type: Fixed, managed Layer 3 switch
- Stacking: Not supported on this model
- Certifications: UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A
- Part number: C1300-48P-4G
- Brand: Cisco
- EAN: 889728521987
Ports
- Total ports: 52 x Gigabit Ethernet
- Ethernet ports (RJ-45): 48 x 10/100/1000 PoE+ (RJ-45)
- SFP / uplink ports: 4 x Gigabit SFP
- Console port: Cisco standard RJ-45 console port and USB Type-C port
- USB port: USB Type-C on the front panel for file and image management and console access
Power over Ethernet
- PoE standard: IEEE 802.3at PoE+, IEEE 802.3af PoE and Cisco pre-standard (legacy) PoE
- PoE power budget: 375 W
- PoE ports: 48
- Maximum power per port: 30 W
- PoE features: Time-based PoE scheduling; PoE power maintained to connected devices while the switch reboots
Performance
- Switching capacity: 104.0 Gbps
- Forwarding rate (64-byte packets): 77.38 Mpps
- Packet buffer: 1.5 MB (shared dynamically across all ports)
- MAC address table: 16,000 addresses
- Jumbo frames: Frame sizes up to 9000 bytes (default MTU 2000 bytes)
- CPU: ARM dual-core at 1.5 GHz
- Memory (DRAM): 1 GB DDR4
- Flash: 512 MB SLC
Switching and Routing
- Layer 3 routing: Static routing, RIP v2 and policy-based routing; up to 990 IPv4 routes (dynamic + static) and 128 IP interfaces; wire-speed IPv4 and IPv6 routing; DHCP server and relay
- VLANs: Up to 4094 VLANs; port-, MAC-, protocol- and IP subnet-based; private VLAN, guest VLAN, voice VLAN, Auto Surveillance VLAN (ASV), Q-in-Q, VLAN translation; GVRP
- Spanning tree: IEEE 802.1D STP, 802.1w RSTP, 802.1s MSTP (16 instances), PVST+ and Rapid PVST+ (126 instances)
- Link aggregation: IEEE 802.3ad LACP; up to 8 groups, up to 8 ports per group
- Multicast: IGMP v1, v2 and v3 snooping (2000 multicast groups), IGMP querier, IGMP proxy, MLD v1/v2 snooping, MLD proxy, Multicast TV VLAN (MVR)
- Quality of service: 8 hardware queues; strict priority and WRR scheduling; 802.1p, DSCP and IP precedence classification; rate limiting with 2R3C policing; iSCSI traffic optimisation
- IPv6: Dual IPv4/IPv6 stack, IPv6 host mode, IPv6 ACLs and QoS, DHCPv6 stateful client, stateless address auto-configuration, ISATAP tunnelling
Security
- Network access control: IEEE 802.1X authenticator and supplicant, MAC authentication, web-based authentication, dynamic VLAN assignment, port security
- Access control lists: Up to 1024 rules; MAC, IPv4 and IPv6 based; ingress and egress; time-based ACLs
- Network protection: DHCP snooping, IP Source Guard, Dynamic ARP Inspection, IPv6 First Hop Security (RA guard, ND inspection, DHCPv6 guard), BPDU Guard, Root Guard, storm control, DoS prevention
- Secure management: SSH v1 and v2, SSL (HTTPS), Secure Copy (SCP), RADIUS and TACACS+ authentication, RADIUS accounting, CLI privilege levels 1, 7 and 15
- Platform security: Chip guard tamper detection at boot, boot integrity visibility, run-time defences (X-Space, ASLR, BOSC), Secure Sensitive Data (SSD)
Management
- Management options: Cisco Business Dashboard (embedded probe or direct management), Cisco Business mobile app, web user interface (HTTP/HTTPS), command-line interface, SNMP v1, v2c and v3
- Provisioning: Cisco Network Plug and Play (PnP) agent with PnP Connect; DHCP auto-configuration; Smartports and Auto Smartports
- Monitoring: sFlow agent, RMON (history, statistics, alarms, events), port and VLAN mirroring (up to 8 sources), RSPAN, flow-based mirroring, syslog, cable diagnostics
- Firmware: Dual firmware images; upgrade through web browser (HTTP/HTTPS), TFTP or SCP
- Discovery protocols: Cisco Discovery Protocol, LLDP (802.1AB) with LLDP-MED, Bonjour
- Bluetooth access: CLI (Telnet/SSH) and web GUI over Bluetooth with an external Bluetooth dongle in the USB port
Power
- Power supply: Internal, universal, 100 to 240 V AC, 50 to 60 Hz
- Power consumption (system, worst case): 110 V: 44.81 W; 220 V: 43.93 W
- Power consumption (with PoE, worst case): 110 V: 450.65 W; 220 V: 437.14 W
- Idle power: 110 V: 21.03 W; 220 V: 20.68 W
- Heat dissipation: 1537.68 BTU/hr
- Energy saving: IEEE 802.3az Energy Efficient Ethernet on copper Gigabit Ethernet ports, energy detect, cable length detection, port LED disable, time-based port operation
Physical
- Dimensions (W x D x H): 444.3 x 350 x 43.94 mm
- Weight: 5.43 kg
- Mounting: Rack-mountable; 19-inch mounting brackets included
- Cooling: 1 fan
- Acoustic noise: 37.3 dBA at 25°C
- LEDs: System, Link/Act, PoE, Speed
- Buttons: Reset button
Environment
- Operating temperature: -5°C to 50°C (minimum ambient temperature for cold start 0°C)
- Storage temperature: -25°C to 70°C
- Operating humidity: 10% to 90%, relative, non-condensing
- Storage humidity: 10% to 90%, relative, non-condensing
- MTBF at 25°C: 1,662,884 hours
Compatibility
- Supported 1G SFP modules: MGBSX1, MGBLX1, MGBLH1, MGBT1, GLC-SX-MMD, GLC-LH-SMD, GLC-EX-SMD, GLC-ZX-SMD, GLC-BX-U, GLC-BX-D, GLC-TE, CWDM-SFP-1470/1490/1510/1530/1550/1570/1590/1610
- Accessories: Console cables CAB-CONSOLE-RJ45 and CAB-CONSOLE-USB-C; power cable restraining clip PWR-CLP; rack-mount kit RCKMNT-1RU-1K=
- Minimum requirements: Web browser (Chrome, Firefox, Edge or Safari); Category 5e Ethernet cable or better
Warranty
- Manufacturer warranty: Limited lifetime with return-to-factory replacement
- Support: Complimentary one-year access to the Cisco Small Business Support Center
- Cisco Catalyst 1300 Series switch
- Power cord
- Mounting kit (with 19-inch rack-mount brackets)
- Pointer card
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
