Cisco
C1300X-48P-4XCisco Catalyst 1300X-48P-4X 48-Port Gigabit PoE+ Managed Switch, 740 W, 4 x 10G SFP28 (C1300X-48P-4X)
The Cisco Catalyst 1300X-48P-4X 48-Port Gigabit PoE+ Managed Switch, 740 W, 4 x 10G SFP28 (C1300X-48P-4X) is a genuine Cisco product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.
The Cisco Catalyst 1300X-48P-4X is a fixed, managed Layer 3 Gigabit Ethernet PoE+ switch from the Catalyst 1300X Series, the higher-specification branch of the Catalyst 1300 family for small and medium-sized businesses and branch offices. It connects and powers IP phones, wireless access points and IP cameras over a single cable. Compared with the standard 1300 models, the 1300X adds OSPF routing, 2 GB of memory and SFP28 ports that run at 25G for stacking.
The C1300X-48P-4X has 48 x 10/100/1000 PoE+ ports (30 W capable) sharing a 740 W power budget, and 4 x SFP28 slots that work as 10G uplinks or at 25G when used for stacking. It has an internal power supply, is cooled by a single fan (48.6 dBA at 25°C) and is supplied with 19-inch rack brackets. Switching capacity is 176 Gbps with a forwarding rate of 130.95 Mpps.
It is managed with the Cisco Business Dashboard, the Cisco Business mobile app, the built-in web interface, a full CLI or SNMP, and supports Cisco Network Plug and Play. Up to eight switches can be stacked and run as one unit with a single IP address; it stacks only with other Catalyst 1300X models, not with the standard 1300 Series. Cisco's limited lifetime warranty with return-to-factory replacement applies.
What the Cisco C1300X-48P-4X is used for
- Connecting and powering up to 48 IP phones, wireless access points or IP cameras, with a 740 W budget and up to 30 W per port
- A 48 port PoE switch with Layer 3 routing (OSPF, RIP, static) for a small or medium-sized business or branch office
- 10G uplinks to the core over 4 SFP28 slots, or 25G stacking with other Catalyst 1300X models
- Rack mounting in a 19-inch cabinet using the supplied brackets
Cisco C1300X-48P-4X: common questions
How much PoE power does the C1300X-48P-4X provide?
740 W, shared across 48 IEEE 802.3at PoE+ ports.
Can all 48 ports deliver 30 W at the same time?
No. Each port can supply up to 30 W, but the 48 ports share a 740 W budget, so the total drawn by all connected devices has to stay within 740 W.
Does it support OSPF routing?
Yes. It supports OSPF v2 and v3 alongside static routing, RIP v2 and policy-based routing, with up to 7168 IPv4 routes.
Which switches can it be stacked with?
Other Catalyst 1300X models only, such as the C1300X-24P-4X and C1300X-48T-4X. Up to 8 switches stack and run as one unit with a single IP address.
Does the switch have a fan?
Yes. It has 1 fan, with acoustic noise of 48.6 dBA at 25°C.
See all Cisco products or network switches from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 48 x 10/100/1000 PoE+ ports plus 4 x SFP28 slots (10G uplink; 25G for stacking only)
- 740 W PoE budget across 48 IEEE 802.3at PoE+ ports, up to 30 W per port
- 176 Gbps switching capacity and 130.95 Mpps forwarding rate; wire-speed and non-blocking
- Layer 3 with static routing, RIP v2, OSPF v2/v3 and policy-based routing; up to 7168 IPv4 routes
- Front Panel Stacking of up to 8 Catalyst 1300X switches, managed as one system with hardware failover
- Managed with Cisco Business Dashboard, Cisco Business mobile app, web interface, CLI or SNMP v1/v2c/v3
- Security: IEEE 802.1X, web authentication, DHCP snooping, IP Source Guard, Dynamic ARP Inspection, IPv6 First Hop Security
- 1 fan (48.6 dBA at 25°C), internal power supply; 444.3 x 340 x 43.94 mm, 5.06 kg
- Cisco limited lifetime warranty with return-to-factory replacement
General
- Ports: 48 ports
- Power over Ethernet: PoE+ (802.3at)
- Ethernet: Gigabit
- Series: Cisco Catalyst 1300X Series
- Switch type: Fixed, managed Layer 3 switch
- Stacking: Front Panel Stacking; up to 8 switches managed as a single system with hardware failover; ring or chain topology; SFP28 ports run at 25G for stacking
- Certifications: UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A
- Part number: C1300X-48P-4X
- Brand: Cisco
- EAN: 889728647441
Ports
- Total ports: 48 x Gigabit Ethernet + 4 x 10G
- Ethernet ports (RJ-45): 48 x 10/100/1000 PoE+ (RJ-45)
- SFP / uplink ports: 4 x SFP28 (10G uplink; 25G available for stacking only)
- Console port: Cisco standard RJ-45 console port and USB Type-C port
- USB port: USB Type-C on the front panel for file and image management and console access
Power over Ethernet
- PoE standard: IEEE 802.3at PoE+
- PoE power budget: 740 W
- PoE ports: 48
- Maximum power per port: 30 W
- PoE features: Time-based PoE scheduling; PoE power maintained to connected devices while the switch reboots
Performance
- Switching capacity: 176 Gbps
- Forwarding rate (64-byte packets): 130.95 Mpps
- Packet buffer: 3 MB (shared dynamically across all ports)
- MAC address table: Up to 32,000 addresses
- Jumbo frames: Frame sizes up to 9000 bytes (default MTU 2000 bytes)
- CPU: ARM dual-core at 1.5 GHz
- Memory (DRAM): 2 GB DDR4
- Flash: 1 GB SLC
Switching and Routing
- Layer 3 routing: Static routing, RIP v2, OSPF v2 and v3, policy-based routing; up to 7168 IPv4 routes (dynamic + static) and 256 IP interfaces; wire-speed IPv4 and IPv6 routing; DHCP server and relay
- VLANs: Up to 4094 VLANs; port-, MAC-, protocol- and IP subnet-based; private VLAN, guest VLAN, voice VLAN, Auto Surveillance VLAN (ASV), Q-in-Q, VLAN translation; GVRP
- Spanning tree: IEEE 802.1D STP, 802.1w RSTP, 802.1s MSTP (16 instances), PVST+ and Rapid PVST+ (126 instances)
- Link aggregation: IEEE 802.3ad LACP; up to 8 groups, up to 8 ports per group
- Multicast: IGMP v1, v2 and v3 snooping (4000 multicast groups), IGMP querier, IGMP proxy, MLD v1/v2 snooping, MLD proxy, Multicast TV VLAN (MVR)
- Quality of service: 8 hardware queues; strict priority and WRR scheduling; 802.1p, DSCP and IP precedence classification; rate limiting with 2R3C policing; iSCSI traffic optimisation
- IPv6: Dual IPv4/IPv6 stack, IPv6 host mode, IPv6 ACLs and QoS, DHCPv6 stateful client, stateless address auto-configuration, ISATAP tunnelling
Security
- Network access control: IEEE 802.1X authenticator and supplicant, MAC authentication, web-based authentication, dynamic VLAN assignment, port security
- Access control lists: Up to 3072 rules; MAC, IPv4 and IPv6 based; ingress and egress; time-based ACLs
- Network protection: DHCP snooping, IP Source Guard, Dynamic ARP Inspection, IPv6 First Hop Security (RA guard, ND inspection, DHCPv6 guard), BPDU Guard, Root Guard, storm control, DoS prevention
- Secure management: SSH v1 and v2, SSL (HTTPS), Secure Copy (SCP), RADIUS and TACACS+ authentication, RADIUS accounting, CLI privilege levels 1, 7 and 15
- Platform security: Chip guard tamper detection at boot, boot integrity visibility, run-time defences (X-Space, ASLR, BOSC), Secure Sensitive Data (SSD)
Management
- Management options: Cisco Business Dashboard (embedded probe or direct management), Cisco Business mobile app, web user interface (HTTP/HTTPS), command-line interface, SNMP v1, v2c and v3
- Provisioning: Cisco Network Plug and Play (PnP) agent with PnP Connect; DHCP auto-configuration; Smartports and Auto Smartports
- Monitoring: sFlow agent, RMON (history, statistics, alarms, events), port and VLAN mirroring (up to 8 sources), RSPAN, flow-based mirroring, syslog, cable diagnostics
- Firmware: Dual firmware images; upgrade through web browser (HTTP/HTTPS), TFTP or SCP
- Discovery protocols: Cisco Discovery Protocol, LLDP (802.1AB) with LLDP-MED, Bonjour
- Bluetooth access: CLI (Telnet/SSH) and web GUI over Bluetooth with an external Bluetooth dongle in the USB port
Power
- Power supply: Internal, universal, 100 to 240 V AC, 50 to 60 Hz
- Power consumption (system, worst case): 110 V: 102.3 W; 220 V: 111 W
- Power consumption (with PoE, worst case): 110 V: 881 W; 220 V: 891.3 W
- Idle power: 110 V: 29.5 W; 220 V: 37.7 W
- Heat dissipation: 3096.18 BTU/hr
- Energy saving: IEEE 802.3az Energy Efficient Ethernet on copper Gigabit Ethernet ports, energy detect, cable length detection, port LED disable, time-based port operation
Physical
- Dimensions (W x D x H): 444.3 x 340 x 43.94 mm
- Weight: 5.06 kg
- Mounting: Rack-mountable; 19-inch mounting brackets included
- Cooling: 1 fan
- Acoustic noise: 48.6 dBA at 25°C
- LEDs: System, Link/Act, PoE, Speed
- Buttons: Reset button
Environment
- Operating temperature: -5°C to 50°C (minimum ambient temperature for cold start 0°C)
- Storage temperature: -25°C to 70°C
- Operating humidity: 10% to 90%, relative, non-condensing
- Storage humidity: 10% to 90%, relative, non-condensing
- MTBF at 25°C: 251,255 hours
Compatibility
- Supported 10G SFP+ modules: SFP-10G-SR, SFP-10G-SR-S, SFP-10G-LR, SFP-10G-LR-S, SFP-10G-ER, SFP-10G-ER-S, SFP-10G-BXD-I, SFP-10G-BXU-I, SFP-10G-T-X (copper, 30 m)
- Supported 10G cables: Passive Twinax SFP-H10GB-CU1M, CU1-5M, CU2M, CU2-5M, CU3M, CU5M, ACU7M and ACU10M; active optical SFP-10G-AOC1M, AOC2M, AOC3M, AOC5M, AOC7M and AOC10M
- Supported 25G modules and cables: SFP-25G-SR-S, SFP-25G-SL, SFP-10/25G-CSR-S, SFP-10/25G-LR-S, SFP-10/25G-LR-I; passive Twinax SFP-H25G-CU1M to CU5M; active optical SFP-25G-AOC1M to AOC10M (25G is for stacking only)
- Stacking compatibility: Stacks with C1300X models only: C1300X-24T-4X, C1300X-24P-4X, C1300X-48T-4X, C1300X-48P-4X, C1300X-10NU-2X, C1300X-24NGU-4X, C1300X-24MU-4X, C1300X-48NGU-4X
- Accessories: Console cables CAB-CONSOLE-RJ45 and CAB-CONSOLE-USB-C; power cable restraining clip PWR-CLP; rack-mount kit RCKMNT-1RU-1K=
- Minimum requirements: Web browser (Chrome, Firefox, Edge or Safari); Category 5e Ethernet cable or better
Warranty
- Manufacturer warranty: Limited lifetime with return-to-factory replacement
- Support: Complimentary one-year access to the Cisco Small Business Support Center
- Cisco Catalyst 1300X Series switch
- Power cord
- Mounting kit (with 19-inch rack-mount brackets)
- Pointer card
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
