Cisco MR44-HW

Cisco Meraki MR44 Wi-Fi 6 Indoor Access Point, 4x4:4 5 GHz + 2x2:2 2.4 GHz, 2.5G Ethernet (MR44-HW)

Exc VAT £760.00
Inc VAT £912.00
110In stock
Buying for a project? Volume pricing and stock allocation 0333 242 1314 · sales@clisecure.com Get a quote
Wi-FiWi-Fi 6
Bands2.4 / 5 GHz
Radios4x4:4 MIMO
Max data rate2.7 Gbps

The Cisco Meraki MR44 Wi-Fi 6 Indoor Access Point, 4x4:4 5 GHz + 2x2:2 2.4 GHz, 2.5G Ethernet (MR44-HW) is a genuine Cisco product, supplied new and boxed through official UK distribution. It provides the Wi-Fi coverage that laptops, phones and wireless devices connect to.

The Cisco Meraki MR44 is a cloud-managed Wi-Fi 6 access point for indoor use in offices, schools, hospitals, shops and hotels. It sits between the MR36 and MR46, giving more 5 GHz capacity for busier areas where voice, video and many client devices share the same cell.

The 5 GHz radio is 4x4:4 and the 2.4 GHz radio is 2x2:2, for a combined frame rate of up to 2.7 Gbps (2,402 Mbps at 5 GHz and 287 Mbps at 2.4 GHz). The uplink is a 100/1000/2.5G multigigabit Ethernet port. A dedicated third radio handles WIDS/WIPS and RF analysis full time and a fourth provides Bluetooth Low Energy beaconing and scanning.

Like all Meraki hardware, the MR44 is configured and monitored through the cloud-hosted Meraki dashboard and needs a valid Meraki access point licence to operate. The MR44-HW part number is the hardware only; the licence is purchased separately. Full operation needs 802.3at PoE+ (30 W); on 802.3af it runs in a low power mode with a 1 Gbps uplink, 2x2:2 on 5 GHz and the scanning and Bluetooth radios disabled. A 12 V DC input is also available.

What the Cisco MR44-HW is used for

  • Extra 5 GHz capacity for busier areas in offices, schools, hospitals, shops and hotels, with a 4x4:4 5 GHz radio and a 2x2:2 2.4 GHz radio
  • Cloud-managed Wi-Fi 6 access point for cells where voice, video and many client devices share airtime, at up to 2.7 Gbps combined frame rate
  • Uplinking over a 100/1000/2.5G multigigabit Ethernet port from an 802.3at PoE+ switch

Cisco MR44-HW: common questions

What PoE does the MR44-HW need?

802.3at PoE+ for full operation, at up to 30 W. An 802.3af source puts it in low power mode: the uplink drops to 1 Gbps, 5 GHz to 2x2:2, and the scanning and Bluetooth radios are disabled.

Is the Meraki licence included with the MR44?

No. MR44-HW is the hardware only. A Meraki access point licence is required to operate it and is purchased separately.

Does the MR44 have a 2.5G port?

Yes. Its single Ethernet port is a 100/1000/2.5GBASE-T multigigabit port.

Is a power adapter included?

No. It has a 12 V DC input as an alternative to PoE, but the DC adapter and PoE injector are sold separately.

How is the MR44 mounted?

On a desktop, ceiling or wall, including ceiling tile rails and cable junction boxes. The mount cradle, drop ceiling mount kit, wall screws, anchors and security screws are included.

Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.

  • Wi-Fi 6 (802.11ax) dual-band access point: 4x4:4 on 5 GHz and 2x2:2 on 2.4 GHz
  • Up to 2.7 Gbps aggregate frame rate: 2,402 Mbps at 5 GHz and 287 Mbps at 2.4 GHz
  • 1 x 100/1000/2.5GBASE-T multigigabit Ethernet port
  • Dedicated third radio for 24x7 WIDS/WIPS, spectrum analysis and location analytics
  • Integrated Bluetooth Low Energy radio with Beacon and scanning support
  • 802.3at PoE+ (30 W maximum); low power mode on 802.3af (15 W); 12 V DC input option
  • Internal antennas: 5.1 dBi maximum gain at 2.4 GHz, 5.9 dBi at 5 GHz
  • WPA3-Personal, WPA3-Enterprise and WPA2 with 802.1X; Layer 7 firewall and guest isolation
  • Cloud-managed through the Meraki dashboard with automatic firmware updates
  • Lifetime hardware warranty with advanced replacement; Meraki licence required

General

  • Power over Ethernet: PoE+ (802.3at)
  • Cellular: 5G
  • Ethernet: 2.5GbE
  • Product type: Cloud-managed indoor Wi-Fi 6 access point
  • Licensing: Meraki access point licence required to operate (purchased separately; not included with the -HW hardware part number)
  • Part number: MR44-HW
  • Brand: Cisco
  • EAN: 810979017769

Wireless

  • Wi-Fi standard: Wi-Fi 6 (IEEE 802.11ax); also 802.11a/b/g/n/ac
  • Frequency bands: 2.4 GHz and 5 GHz, concurrent
  • Spatial streams: 5 GHz: 4x4:4 MU-MIMO (four spatial streams); 2.4 GHz: 2x2:2 MU-MIMO (two spatial streams)
  • Maximum data rate: 2.7 Gbps aggregate frame rate (2,402 Mbps at 5 GHz, 287 Mbps at 2.4 GHz)
  • Channel widths: 20, 40 and 80 MHz (40 MHz supported in the 5 GHz band only)
  • Modulation: Up to 1024-QAM on both 2.4 GHz and 5 GHz bands
  • Wi-Fi 6 features: DL-OFDMA, UL-OFDMA, TWT, BSS Coloring, SU-MIMO, UL and DL MU-MIMO, beamforming, maximal ratio combining
  • Client radios: 2.4 GHz 802.11b/g/n/ax and 5 GHz 802.11a/n/ac/ax client access radios; all four radios operate concurrently
  • Scanning radio: Dedicated 2.4 GHz and 5 GHz dual-band radio for WIDS/WIPS, spectrum analysis and location analytics
  • Bluetooth radio: 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support
  • Antenna: Internal; 5.1 dBi maximum gain at 2.4 GHz, 5.9 dBi maximum gain at 5 GHz

Ports

  • Ethernet ports: 1 x 100/1000/2.5GBASE-T (RJ45)
  • Additional ports: 1 x DC power connector (5.5 mm x 2.5 mm, centre positive)

Power

  • PoE requirement: IEEE 802.3at PoE+, 42.5 - 57 V; low power mode on 802.3af, 37 - 57 V (1 Gbps uplink, 2x2:2 on 5 GHz, scanning and Bluetooth radios disabled, reduced transmit power)
  • Power consumption: 30 W maximum (802.3at) or 15 W maximum (802.3af, low power mode)
  • Alternative power: 12 V DC input (DC adapter and PoE injector sold separately)

Security

  • Encryption and authentication: WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3-Personal, WPA3-Enterprise, WPA3-Enhanced Open (OWE); TKIP and AES encryption; EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
  • Wireless intrusion detection: Real-time WIDS/WIPS with alerting and automatic rogue AP containment (Air Marshal) on the dedicated scanning radio
  • Firewall and policy: Integrated Layer 7 firewall with mobile device policy management; guest access with device isolation; 802.1Q VLAN tagging; PCI compliance reporting

Management

  • Management: Cloud-managed through the Cisco Meraki dashboard; self-configuring; automatic firmware updates
  • Quality of service: WMM access categories with DSCP and 802.1p; U-APSD power save; Layer 7 application traffic identification and shaping
  • Roaming: PMK, OKC and 802.11r for fast Layer 2 roaming; distributed or centralised Layer 3 roaming

Physical

  • Dimensions (W x D x H): 306 x 128.4 x 44.3 mm (not including desk mount feet or mount plate)
  • Weight: 0.739 kg
  • Mounting: Desktop, ceiling and wall mount; ceiling tile rail (9/16, 15/16 or 1 1/2 in flush or recessed rails) and cable junction boxes; mounting hardware included
  • Physical security: Two security screw options (included); Kensington lock hard point; concealed mount plate with anti-tamper cable bay

Environment

  • Operating temperature: 0 °C to 40 °C
  • Humidity: 5 to 95% non-condensing
  • Operating altitude: Up to 12,192 m (40,000 ft)
  • MTBF: 500,000 hours at +25 °C

Warranty

  • Manufacturer warranty: Lifetime hardware warranty with advanced replacement included (indoor access point)
  • MR44 cloud-managed access point
  • Mount cradle with built-in level tool
  • Drop ceiling mount kit
  • Wall screws, wall screw anchors and security screws

UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.

Cisco Meraki MR44 Wi-Fi 6 Indoor Access Point, 4x4:4 5 GHz + 2x2:2 2.4 GHz, 2.5G Ethernet (MR44-HW)
Cisco Meraki MR44 Wi-Fi 6 Indoor Access Point, 4x4:4 5 GHz + 2x2:2 2.4 GHz, 2.5G Ethernet (MR44-HW) £760.00 Exc VAT · In stock
Trade pricing availableNext-day UK dispatchGenuine UK stockProject quote supportSecure checkoutExpert pre-sales advice

Customer reviews

★ We're on Trustpilot Bought from us? An honest review helps other installers and IT teams choose. Review us on Trustpilot

Built for B2B buying

From product selection to deployment, this is made for real projects.

Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.

1Check compatibility
2Choose fulfilment
3Deploy with support
Trade quote ready Send your basket for quantity pricing and project supply checks.
Same basket support Add licences, mounts, switches, storage or accessories with confidence.
Cisco Meraki MR44 Wi-Fi 6 Indoor Access Point, 4x4:4 5 GHz + 2x2:2 2.4 GHz, 2.5G Ethernet (MR44-HW)
Need fit advice? Ask before checkout and avoid wrong-spec purchases.

Why choose us

Procurement that feels fast, clear and trade-ready.

Every product page is designed to help you move from shortlist to checkout with fewer unknowns.

Genuine UK stock New, boxed products sourced through official UK distribution.
Project help Ask for fit checks, renewal advice and quantity pricing.
Fast dispatch Choose UK delivery options for urgent deployments.
Secure checkout Order online or speak to the team for larger baskets.

Common questions

Product and order FAQs

Can I request trade or bulk pricing?

Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.

How quickly can this be delivered?

Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.

Can you help confirm compatibility?

Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.

Do you supply renewals and supporting accessories?

CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.