Cisco MR86-HW

Cisco Meraki MR86 Wi-Fi 6 Outdoor Access Point, 4x4:4 Dual-Band, IP67, External Antenna Ports (MR86-HW)

Exc VAT £2,060.00
Inc VAT £2,472.00
14In stock
Buying for a project? Volume pricing and stock allocation 0333 242 1314 · sales@clisecure.com Get a quote
Wi-FiWi-Fi 6
Bands2.4 / 5 GHz
Radios4x4:4 MIMO
Max data rate3.0 Gbps

The Cisco Meraki MR86 Wi-Fi 6 Outdoor Access Point, 4x4:4 Dual-Band, IP67, External Antenna Ports (MR86-HW) is a genuine Cisco product, supplied new and boxed through official UK distribution. It provides the Wi-Fi coverage that laptops, phones and wireless devices connect to.

The Cisco Meraki MR86 is a cloud-managed, high-performance Wi-Fi 6 access point in an IP67 housing for outdoor and harsh environments. It is used for outdoor areas such as campus grounds, yards, car parks and warehouse perimeters where separate antennas are chosen to direct the coverage.

Both client radios are 4x4:4 MU-MIMO 802.11ax, for a combined frame rate of up to 3.0 Gbps (2,402 Mbps at 5 GHz and 574 Mbps at 2.4 GHz), with a 100/1000/2.5G multigigabit Ethernet uplink. It has four external N-type antenna connectors serving both bands, a dedicated scanning radio for full-time WIDS/WIPS and a Bluetooth Low Energy radio, and operates from -40 °C to 55 °C.

Like all Meraki hardware, the MR86 is configured and monitored through the cloud-hosted Meraki dashboard and needs a valid Meraki access point licence to operate. The MR86-HW part number is the hardware only; the licence is purchased separately. Antennas are not included; compatible models are the Meraki MA-ANT-20, MA-ANT-25 and MA-ANT-27 and the Cisco AIR-ANT2513P4M-N=. It is powered by 802.3at PoE+ only, and the injector is sold separately.

What the Cisco MR86-HW is used for

  • Cloud-managed outdoor access point for campus grounds, yards, car parks and warehouse perimeters, in an IP67 housing rated from -40 °C to 55 °C
  • Directing coverage with separately chosen antennas on four external N-type connectors
  • Two 4x4:4 Wi-Fi 6 client radios at a combined frame rate of up to 3.0 Gbps, with a 100/1000/2.5G multigigabit uplink

Cisco MR86-HW: common questions

Are antennas included with the MR86-HW?

No. It has four N-type female connectors and antennas are not included. Antennas listed as compatible are the Meraki MA-ANT-20, MA-ANT-25 and MA-ANT-27 and the Cisco AIR-ANT2513P4M-N=.

How is the Meraki MR86 powered?

By 802.3at PoE+ only, at up to 30 W. The PoE injector is sold separately.

Is the Meraki licence included?

No. MR86-HW is the hardware only. The Meraki access point licence it needs to operate is purchased separately.

Can the MR86 be mounted on a pole?

Yes. It mounts to walls and vertical poles, and the mount cradle, wall screws, wall screw anchors, grounding screws and mounting straps are included.

What warranty comes with the MR86?

A 1-year hardware warranty with advanced replacement included, as an outdoor access point.

Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.

  • Outdoor Wi-Fi 6 (802.11ax) dual-band access point with 4x4:4 MU-MIMO on 2.4 GHz and 5 GHz
  • Up to 3.0 Gbps aggregate frame rate: 2,402 Mbps at 5 GHz and 574 Mbps at 2.4 GHz
  • IP67 environmental rating; operating temperature -40 °C to 55 °C
  • 4 x external N-type antenna connectors; antennas not included (MA-ANT-20, MA-ANT-25, MA-ANT-27)
  • 1 x 100/1000/2.5GBASE-T multigigabit Ethernet port
  • Dedicated third radio for 24x7 WIDS/WIPS, spectrum analysis and location analytics
  • Integrated Bluetooth Low Energy radio with Beacon and scanning support
  • Requires 802.3at PoE+ (30 W maximum)
  • Mounts to walls and vertical poles; mounting hardware and straps included
  • 1-year hardware warranty with advanced replacement; Meraki licence required

General

  • Power over Ethernet: PoE+ (802.3at)
  • Product type: Cloud-managed outdoor Wi-Fi 6 access point for external antennas
  • Licensing: Meraki access point licence required to operate (purchased separately; not included with the -HW hardware part number)
  • Part number: MR86-HW
  • Brand: Cisco
  • EAN: 810979017387

Wireless

  • Wi-Fi standard: Wi-Fi 6 (IEEE 802.11ax); also 802.11a/b/g/n/ac
  • Frequency bands: 2.4 GHz and 5 GHz, concurrent
  • Spatial streams: 4x4:4 MU-MIMO on both 2.4 GHz and 5 GHz (four spatial streams)
  • Maximum data rate: 3.0 Gbps aggregate frame rate (2,402 Mbps at 5 GHz, 574 Mbps at 2.4 GHz)
  • Channel widths: 20, 40 and 80 MHz (40 MHz supported in the 5 GHz band only)
  • Modulation: Up to 1024-QAM on both 2.4 GHz and 5 GHz bands
  • Wi-Fi 6 features: DL-OFDMA, UL-OFDMA, TWT, BSS Coloring, SU-MIMO, UL and DL MU-MIMO, beamforming, maximal ratio combining
  • Client radios: 2.4 GHz 802.11b/g/n/ax and 5 GHz 802.11a/n/ac/ax client access radios; all four radios operate concurrently
  • Scanning radio: Dedicated 2.4 GHz and 5 GHz dual-band radio for WIDS/WIPS, spectrum analysis and location analytics
  • Bluetooth radio: 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support
  • Antenna: External (not included): 4 x N-type female connectors; compatible antennas MA-ANT-20, MA-ANT-25, MA-ANT-27 and AIR-ANT2513P4M-N=

Ports

  • Ethernet ports: 1 x 100/1000/2.5GBASE-T (RJ45)
  • Additional ports: 4 x N-type female antenna connectors

Power

  • PoE requirement: IEEE 802.3at PoE+ required, 42.5 - 57 V
  • Power consumption: 30 W maximum (802.3at required)

Security

  • Encryption and authentication: WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3-Personal, WPA3-Enterprise, WPA3-Enhanced Open (OWE); TKIP and AES encryption; EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
  • Wireless intrusion detection: Real-time WIDS/WIPS with alerting and automatic rogue AP containment (Air Marshal) on the dedicated scanning radio
  • Firewall and policy: Integrated Layer 7 firewall with mobile device policy management; guest access with device isolation; 802.1Q VLAN tagging; PCI compliance reporting

Management

  • Management: Cloud-managed through the Cisco Meraki dashboard; self-configuring; automatic firmware updates
  • Quality of service: WMM access categories with DSCP and 802.1p; U-APSD power save; Layer 7 application traffic identification and shaping
  • Roaming: PMK, OKC and 802.11r for fast Layer 2 roaming; distributed or centralised Layer 3 roaming

Physical

  • Dimensions (W x D x H): 300 x 153 x 55 mm (not including cable gland, mounts or antennas)
  • Weight: 1.5 kg
  • Mounting: Walls and vertical poles; all standard mounting hardware included
  • Physical security: Two security screws; concealed mount plate with anti-tamper cable bay

Environment

  • Operating temperature: -40 °C to 55 °C (operating and storage)
  • Humidity: 5 to 95% non-condensing (operating and storage)
  • Operating altitude: Up to 12,192 m (40,000 ft)
  • Ingress protection: IP67
  • MTBF: 1,566,656 hours at +25 °C

Warranty

  • Manufacturer warranty: 1-year hardware warranty with advanced replacement included (outdoor access point)
  • MR86 cloud-managed access point
  • Mount cradle
  • Wall screws
  • Wall screw anchors
  • Grounding screws
  • Mounting straps

UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.

Cisco Meraki MR86 Wi-Fi 6 Outdoor Access Point, 4x4:4 Dual-Band, IP67, External Antenna Ports (MR86-HW)
Cisco Meraki MR86 Wi-Fi 6 Outdoor Access Point, 4x4:4 Dual-Band, IP67, External Antenna Ports (MR86-HW) £2,060.00 Exc VAT · In stock
Trade pricing availableNext-day UK dispatchGenuine UK stockProject quote supportSecure checkoutExpert pre-sales advice

Customer reviews

★ We're on Trustpilot Bought from us? An honest review helps other installers and IT teams choose. Review us on Trustpilot

Built for B2B buying

From product selection to deployment, this is made for real projects.

Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.

1Check compatibility
2Choose fulfilment
3Deploy with support
Trade quote ready Send your basket for quantity pricing and project supply checks.
Same basket support Add licences, mounts, switches, storage or accessories with confidence.
Cisco Meraki MR86 Wi-Fi 6 Outdoor Access Point, 4x4:4 Dual-Band, IP67, External Antenna Ports (MR86-HW)
Need fit advice? Ask before checkout and avoid wrong-spec purchases.

Why choose us

Procurement that feels fast, clear and trade-ready.

Every product page is designed to help you move from shortlist to checkout with fewer unknowns.

Genuine UK stock New, boxed products sourced through official UK distribution.
Project help Ask for fit checks, renewal advice and quantity pricing.
Fast dispatch Choose UK delivery options for urgent deployments.
Secure checkout Order online or speak to the team for larger baskets.

Common questions

Product and order FAQs

Can I request trade or bulk pricing?

Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.

How quickly can this be delivered?

Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.

Can you help confirm compatibility?

Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.

Do you supply renewals and supporting accessories?

CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.