Cisco
CW9172H-CFGCisco Wireless 9172H Wi-Fi 7 Wall-Plate Access Point, Tri-Band 2x2:2, 3 x 1G LAN Ports, Global Use (CW9172H-CFG)
The Cisco Wireless 9172H Wi-Fi 7 Wall-Plate Access Point, Tri-Band 2x2:2, 3 x 1G LAN Ports, Global Use (CW9172H-CFG) is a genuine Cisco product, supplied new and boxed through official UK distribution. It provides the Wi-Fi coverage that laptops, phones and wireless devices connect to.
The Cisco Wireless 9172H is a Wi-Fi 7 (802.11be) wall-plate access point for hotel rooms, student accommodation and other multi-dwelling buildings. It fixes to a wall or network box in each room and provides both Wi-Fi and wired Ethernet ports for devices such as IP televisions, phones and point-of-sale terminals.
It has three 2x2 radios on 2.4, 5 and 6 GHz (six spatial streams) with PHY data rates up to 9 Gbps. Besides the 2.5 Gbps multigigabit uplink there are three Gigabit LAN ports, one of which can supply PoE to a connected device, and a passthrough port. 802.3at PoE+ (25.5 W) runs all radios; PoE output of 15.4 W on the LAN port needs an 802.3bt class 5 source (41 W at the device).
This is a Cisco "global use" access point: the part number carries no regulatory domain and no management mode. At first start-up the unit works out its location and whether it is managed by a Catalyst 9800 controller or the Meraki dashboard, and it can be moved between the two later. "-CFG" is Cisco's Configurable ordering option, where mounting accessories and packaging are chosen at order. A Cisco Networking Subscription with Wireless Essentials or Advantage licences is required in either mode.
What the Cisco CW9172H-CFG is used for
- Wi-Fi 7 access point for hotel rooms, student accommodation and other multi-dwelling buildings, fixed to the wall or a network box in each room
- In-room wired connections for IP televisions, phones and point-of-sale terminals through three Gigabit LAN ports and a passthrough port
- Powering one wired device at up to 15.4 W from a LAN port when the unit itself is fed by 802.3bt class 5
- Tri-band coverage on 2.4, 5 and 6 GHz from three 2x2 radios, with PHY data rates up to 9 Gbps
Cisco CW9172H-CFG: common questions
How many Ethernet ports does the CW9172H-CFG have?
One 2.5G multigigabit uplink, three 100M/1000M LAN ports, one of which can supply PoE, and one passthrough port.
Can the 9172H power a device over PoE?
Yes, on one LAN port. It supplies 15.4 W, but only when the access point is powered by an 802.3bt class 5 source (41 W at the device). On 802.3at PoE+ all radios run but there is no PoE output.
Does it need a licence?
Yes. A Cisco Networking Subscription with Cisco Wireless Essentials or Advantage licences is required whichever management mode is used, Catalyst 9800 controller or Meraki dashboard.
Is the wall-plate bracket included?
Yes. Cisco's default is the CW-MNT-H1 wall-plate bracket, with mounting accessories chosen at order. The box also holds a passthrough cable jumper, security screws and a release tool.
Which country version is this access point?
It is a global-use model, so the part number carries no regulatory domain. The unit works out its location at first start-up and its regulatory settings are determined at onboarding.
See all Cisco products or wireless access points from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- Wi-Fi 7 (802.11be) wall-plate access point with 4096-QAM, Multi-Link Operation and OFDMA
- Tri-radio: 2x2:2 on 2.4, 5 and 6 GHz, six spatial streams, PHY data rates up to 9 Gbps
- 1 x 100M/1000M/2.5G multigigabit Ethernet uplink
- 3 x 100M/1000M Ethernet LAN ports, one with PoE output, plus 1 passthrough port
- 802.3at PoE+ (25.5 W) runs all radios; 802.3bt class 5 (41 W) enables 15.4 W PoE output on the LAN port
- Typical power consumption 12.8 W (±4 W), idle 10.7 W (±2 W), on 802.3at
- Integrated BLE and 802.15.4 IoT radio; dedicated scanning radio
- Wall-plate size 130 x 180 x 26 mm, 572 g; wall, network-box or desk mounting
- Global use: regulatory domain and management mode (Catalyst 9800 or Meraki) set at onboarding
- Requires a Cisco Networking Subscription; limited lifetime hardware warranty
General
- Wi-Fi standard: Wi-Fi 7 (802.11be)
- Power over Ethernet: PoE++ (802.3bt)
- Cellular: 5G
- Product type: Wall-plate access point with internal omnidirectional antennas
- Wi-Fi generation: Wi-Fi 7 (802.11be)
- Part number suffix: Global-use access point: the part number carries no regulatory domain or management mode; both are determined at onboarding. -CFG is Cisco's "Configurable" ordering option, with accessories and packaging chosen at order.
- Management mode as shipped: Not fixed: management mode (Catalyst or Meraki) and regulatory settings are determined at onboarding
- Licensing: Requires a Cisco Networking Subscription with Cisco Wireless Essentials or Advantage licences, whichever management mode is used. Cisco states an active licence is required for full functionality.
- Part number: CW9172H-CFG
- Brand: Cisco
- EAN: 889728639415
Wireless
- Wi-Fi standards: IEEE 802.11a/b/g/n/ac/ax/be
- Frequency bands: 2.4 GHz, 5 GHz and 6 GHz
- Radios and spatial streams: Three client radios, six spatial streams in total: 2.4 GHz, 5 GHz and 6 GHz, all 2x2:2; plus a dedicated scan radio
- Maximum data rate: PHY data rates up to 9 Gbps (2x2 320 MHz on 6 GHz, 2x2 160 MHz on 5 GHz and 2x2 20 MHz on 2.4 GHz)
- Channel widths: 6 GHz: 20, 40, 80, 160 and 320 MHz; 5 GHz: 20, 40, 80 and 160 MHz; 2.4 GHz: 20 MHz
- Antennas: Internal, omnidirectional in azimuth; peak gain 4 dBi (2.4 GHz), 7 dBi (5 GHz), 6 dBi (6 GHz) and 1.25 dBi (IoT)
- Bluetooth / IoT radio: Integrated IoT radio with Bluetooth Low Energy (listed by Cisco as BLE 6) and 802.15.4
- Maximum transmit power: 23 dBm (200 mW) on each of the 2.4, 5 and 6 GHz bands
- 6 GHz operation: Where 6 GHz use is not permitted or not yet supported in software, the 6 GHz radio is disabled
Ports
- Ethernet uplink: 1 x 100M/1000M/2.5G multigigabit Ethernet (RJ-45)
- LAN ports: 3 x 100M/1000M Ethernet LAN ports, one capable of PoE output; 1 x passthrough port
- Console port: RJ-45 management console port, default speed 115200 bps
Power over Ethernet
- PoE output: 15.4 W on one LAN port, available when the access point is powered by 802.3bt class 5 (Cisco UPOE)
Power
- PoE requirement: 802.3at PoE+ for all three radios at 2x2 with a 2.5G link (no PoE output); 802.3bt class 5 (Cisco UPOE) to add PoE output
- Power draw: Maximum at the device: 25.5 W on 802.3at, 41 W on 802.3bt class 5. On 802.3at: 10.7 W ±2 W idle, 12.8 W ±4 W typical
- Reduced-power operation: On 802.3af (12.95 W) the data sheet lists the 2.4 GHz radio at 1x1 only, a 1G uplink and no PoE output
- Other power options: Cisco-approved power injector
Management
- Management options: Cisco Catalyst 9800 Series wireless controller (on-premises), Cisco Meraki dashboard (cloud) or hybrid; the unit discovers its management mode at first start-up and can be migrated later
- Supported controllers: Cisco Catalyst 9800 Series wireless controllers (physical or virtual); Catalyst 9000 switches with Embedded Wireless Controller in SD-Access mode
- Minimum software: Cisco IOS XE 17.17.1 or later
Security
- Wireless security: WPA3, WPA2 (802.11i), 802.1X, Enhanced Open (OWE), AES with GCMP-128, GCMP-256 and CCMP-256
- Platform security: Image signing, Secure Boot and the Cisco Trust Anchor module
- Certifications: Wi-Fi Alliance: Wi-Fi 7 (R1), Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security
Physical
- Dimensions (W x D x H): 130 x 180 x 26 mm (13 x 18 x 2.6 cm), without mounting bracket
- Weight: 0.572 kg (572 g)
- Mounting: Wall or electrical/network box with wall-plate bracket CW-MNT-H1; optional wall spacer CW-ACC-SPACER1-00, port-lock CW-MNT-H3-00 and desk stand CW-ACC-DESK1-00
Environment
- Operating temperature: 0 to 40°C; performance derated from 40 to 50°C
- Storage temperature: -40 to 70°C
- Operating humidity: 0% to 95% (non-condensing)
Warranty
- Manufacturer warranty: Cisco limited lifetime hardware warranty, for as long as the original end user owns or uses the product; 5-day advance hardware replacement; software media warranted for 90 days.
- Cisco Wireless 9172H access point
- Wall-plate mounting bracket CW-MNT-H1 (Cisco default; mounting accessories are chosen at order)
- Passthrough cable jumper
- Allen key or security release tool
- Long Torx (25 mm) security screw
- Two short flat-head T8 Torx M2.5 x 12 mm security screws
- Mylar label to cover the screw
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
