Cisco
CW9176I-CFGCisco Wireless 9176I Wi-Fi 7 Access Point, Tri-Band 4x4:4, 10G mGig, Global Use (CW9176I-CFG)
The Cisco Wireless 9176I Wi-Fi 7 Access Point, Tri-Band 4x4:4, 10G mGig, Global Use (CW9176I-CFG) is a genuine Cisco product, supplied new and boxed through official UK distribution. It provides the Wi-Fi coverage that laptops, phones and wireless devices connect to.
The Cisco Wireless 9176I is a high-performance Wi-Fi 7 (802.11be) indoor access point for dense environments and demanding applications in large offices, campuses, healthcare and education. It has internal omnidirectional antennas; the 9176D1 is the directional-antenna version.
All three radios are 4x4 with four spatial streams, 12 in total. They run as 2.4, 5 and 6 GHz (PHY data rates up to 18 Gbps) or as two 5 GHz radios plus 6 GHz (up to 23 Gbps). The uplink is a 10 Gbps multigigabit Ethernet port. Full operation needs 802.3bt class 5 power (39 W maximum); on 802.3at PoE+ the 2.4 GHz radio drops to 2x2 and the link to 2.5 Gbps. Ultra-wideband, GNSS/GPS, an accelerometer and a BLE 5.3 IoT radio are built in.
This is a Cisco "global use" access point: the part number carries no regulatory domain and no management mode. At first start-up the unit works out its location and whether it is managed by a Catalyst 9800 controller or the Meraki dashboard, and it can be moved between the two later. "-CFG" is Cisco's Configurable ordering option, where mounting accessories and packaging are chosen at order. A Cisco Networking Subscription with Wireless Essentials or Advantage licences is required in either mode.
What the Cisco CW9176I-CFG is used for
- High-density Wi-Fi 7 access point for large offices, campuses, healthcare and education, with three 4x4 radios and 12 spatial streams
- Running as 2.4/5/6 GHz at PHY data rates up to 18 Gbps, or as two 5 GHz radios plus 6 GHz at up to 23 Gbps
- Carrying Wi-Fi 7 traffic back to the switch over a 10 Gbps multigigabit Ethernet uplink
- Location-aware deployments, with ultra-wideband, GNSS/GPS, an accelerometer and Bluetooth Low Energy 5.3 built in
Cisco CW9176I-CFG: common questions
What PoE does the CW9176I-CFG need?
802.3bt class 5 (Cisco UPOE) for full operation, at up to 39 W. On 802.3at PoE+ the 2.4 GHz radio drops to 2x2, the link to 2.5G and the USB port is off. 802.3af is for configuration staging only.
What cable is needed for the 10 Gbps uplink?
Cat 6/6A cabling is required for 10 Gbps. The single RJ-45 uplink also links at 100M, 1000M, 2.5G and 5G.
Does the 9176I need a licence?
Yes. It requires a Cisco Networking Subscription with Cisco Wireless Essentials or Advantage licences, whichever management mode is used.
Is a PoE injector included?
No. The Cisco CW-INJ-8 power injector (802.3bt, 60 W, 10 Gbps) is sold separately. The box holds the access point, the mounting bracket and ceiling-rail clip chosen at order, and documentation.
Does it work with a Catalyst 9800 controller or Meraki?
Both. It is managed by a Catalyst 9800 Series wireless controller or the Cisco Meraki dashboard, discovers its management mode at first start-up and can be migrated later.
See all Cisco products or wireless access points from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- Wi-Fi 7 (802.11be) with 4096-QAM, Multi-Link Operation, preamble puncturing and OFDMA
- Three 4x4:4 radios, 12 spatial streams, flexible between 2.4/5/6 GHz and 5/5/6 GHz operation
- PHY data rates up to 18 Gbps (2.4/5/6 GHz mode) or 23 Gbps (5/5/6 GHz mode)
- 6 GHz channels up to 320 MHz wide; 5 GHz up to 160 MHz
- 1 x 100M/1000M/2.5G/5G/10G multigigabit Ethernet uplink, RJ-45 console port and USB 2.0 (9 W)
- 802.3bt class 5 (Cisco UPOE) for full operation, 39 W maximum; reduced operation on 802.3at at 25.5 W
- Typical power consumption 17.7 W (±4 W) on 802.3bt, 17.2 W (±4 W) on 802.3at
- Built-in ultra-wideband (UWB) radio, GNSS/GPS, accelerometer and Bluetooth Low Energy 5.3
- Global use: regulatory domain and management mode (Catalyst 9800 or Meraki) set at onboarding
- Requires a Cisco Networking Subscription; limited lifetime hardware warranty
General
- Wi-Fi standard: Wi-Fi 7 (802.11be)
- Power over Ethernet: PoE++ (802.3bt)
- Cellular: 5G
- Product type: Indoor access point with internal omnidirectional antennas
- Wi-Fi generation: Wi-Fi 7 (802.11be)
- Part number suffix: Global-use access point: the part number carries no regulatory domain or management mode; both are determined at onboarding. -CFG is Cisco's "Configurable" ordering option, with accessories and packaging chosen at order.
- Management mode as shipped: Not fixed: management mode (Catalyst or Meraki) and regulatory settings are determined at onboarding
- Licensing: Requires a Cisco Networking Subscription with Cisco Wireless Essentials or Advantage licences, whichever management mode is used. Cisco states an active licence is required for full functionality.
- Part number: CW9176I-CFG
- Brand: Cisco
- EAN: 889728625821
Wireless
- Wi-Fi standards: IEEE 802.11a/b/g/n/ac/ax/be
- Frequency bands: 2.4 GHz, 5 GHz and 6 GHz
- Radios and spatial streams: Three radios, 12 spatial streams in total, 4x4:4 each: 2.4/5 GHz (XOR), 5 GHz and 6 GHz; operates as 2.4/5/6 GHz or 5/5/6 GHz
- Maximum data rate: PHY data rates up to 18 Gbps (4x4 320 MHz on 6 GHz, 4x4 160 MHz on 5 GHz, 4x4 20 MHz on 2.4 GHz) or up to 23 Gbps in 5/5/6 GHz mode
- Channel widths: 6 GHz: 20, 40, 80, 160 and 320 MHz; 5 GHz: 20, 40, 80 and 160 MHz; 2.4 GHz: 20 MHz
- Antennas: Internal, omnidirectional in azimuth; peak gain 5 dBi (2.4 GHz), 5 dBi (5 GHz), 6 dBi (6 GHz), 4 dBi (IoT) and 7 dBi (UWB)
- Bluetooth / IoT radio: Integrated Bluetooth Low Energy 5.3 IoT radio (upgradable to BLE 6 by a future software update)
- Location radios and sensors: Integrated ultra-wideband (UWB) radio, built-in GNSS/GPS receiver and antenna, and accelerometer
- Maximum transmit power: 23 dBm (200 mW) on each of the 2.4, 5 and 6 GHz bands
- 6 GHz operation: Where 6 GHz use is not permitted or not yet supported in software, the 6 GHz radio is disabled
Ports
- Ethernet uplink: 1 x 100M/1000M/2.5G/5G/10G multigigabit Ethernet (RJ-45); Cat 6/6A cabling required for 10 Gbps
- Console port: RJ-45 management console port, default speed 115200 bps
- USB: 1 x USB 2.0, 9 W
Power
- PoE requirement: 802.3bt class 5 (Cisco UPOE) for full operation: all radios at 4x4, 10G link, USB on
- Power draw: Maximum: 39 W on 802.3bt class 5, 25.5 W on 802.3at. Typical 17.7 W ±4 W (idle 15.5 W ±2 W) on 802.3bt; typical 17.2 W ±4 W (idle 15.4 W ±2 W) on 802.3at
- Reduced-power operation: On 802.3at PoE+: 2.4 GHz at 2x2, 5 and 6 GHz at 4x4, 2.5G link, USB off. 802.3af is for configuration staging only (all radios off)
- Other power options: Cisco power injector CW-INJ-8 (802.3bt, 60 W, 10 Gbps), sold separately
Management
- Management options: Cisco Catalyst 9800 Series wireless controller (on-premises), Cisco Meraki dashboard (cloud) or hybrid; the unit discovers its management mode at first start-up and can be migrated later
- Supported controllers: Cisco Catalyst 9800 Series wireless controllers (physical or virtual); Catalyst 9000 switches with Embedded Wireless Controller in SD-Access mode
- Minimum software: Cisco IOS XE 17.15.2 or later
Security
- Wireless security: WPA3, WPA2 (802.11i), 802.1X, Enhanced Open (OWE), AES with GCMP-128, GCMP-256 and CCMP-256
- Platform security: Image signing, Secure Boot and the Cisco Trust Anchor module
- Certifications: Wi-Fi Alliance: Wi-Fi 7 (R1), Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security
Physical
- Dimensions (W x D x H): 240 x 240 x 51 mm (24 x 24 x 5.1 cm), without mounting bracket
- Weight: 1.56 kg
- Mounting: Suspended ceiling, hard ceiling, wall, electrical or network box, or above a suspended ceiling; bracket AIR-AP-BRACKET-1 or AIR-AP-BRACKET-2
Environment
- Operating temperature: 0 to 50°C
- Storage temperature: -30 to 70°C
- Operating humidity: 10% to 90% (non-condensing)
Warranty
- Manufacturer warranty: Cisco limited lifetime hardware warranty, for as long as the original end user owns or uses the product; 5-day advance hardware replacement; software media warranted for 90 days.
- Cisco Wireless 9176I access point
- Mounting bracket and ceiling-rail clip as chosen at order (Cisco defaults: AIR-AP-BRACKET-1= and AIR-AP-T-RAIL-R=)
- Cisco product documentation and pointer card
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
