Netgear
GSM4212P-100EUSNETGEAR AV Line M4250-10G2F-PoE+ 8-Port Gigabit PoE+ Managed Switch, 125 W, 2 x 1G, 2 x SFP (GSM4212P-100EUS)
The NETGEAR AV Line M4250-10G2F-PoE+ 8-Port Gigabit PoE+ Managed Switch, 125 W, 2 x 1G, 2 x SFP (GSM4212P-100EUS) is a genuine Netgear product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.
The NETGEAR AV Line M4250-10G2F-PoE+ is a fully managed switch built for audio and video over IP installations - conference rooms, studios, live venues and similar - and for general IT use where PoE and Layer 3 features are needed. It is a compact rack-mount model for small AV systems and audio installations with Gigabit uplinks.
It has eight 10/100/1000BASE-T PoE+ ports with a 125 W PoE budget, two further Gigabit RJ45 ports and two 1G SFP ports, on a 24 Gbps non-blocking fabric. The switch is pre-configured for AV over IP, with port-based profiles for Dante, Q-SYS, AES67, AVB, NDI and other systems in a dedicated AV web interface, NETGEAR IGMP Plus for multicast between switches, and Layer 3 features including static, RIP and PIM routing.
The 1U chassis has a black display panel at the front and all ports at the back, and can be reversed so the ports face the front of the rack. It is covered by the NETGEAR Enterprise Lifetime Warranty, with three years of Sprint support included. Fan modes can be set for fanless, quiet or cool operation; fanless running is specified up to an 80 W PoE load at 25 °C.
What the Netgear GSM4212P-100EUS is used for
- Running a small AV system or audio installation over IP from a 1U rack-mount managed switch with 8 PoE+ ports and a 125 W budget
- Connecting Dante, Q-SYS, AES67, AVB or NDI devices with pre-configured port profiles and NETGEAR IGMP Plus multicast
- Fitting an AV rack with ports at the back or reversed to the front, or recessed by 2 inches using the longer brackets supplied
- Uplinking at Gigabit through 2 further RJ45 ports and 2 x 1G SFP ports
Netgear GSM4212P-100EUS: common questions
How much PoE power does the GSM4212P-100EUS provide?
125 W in total across 8 PoE+ ports, with up to 30 W per port (IEEE 802.3at).
Is the M4250-10G2F-PoE+ rack mountable?
Yes. It is a 1U switch for a 19-inch rack. Two short brackets for two-post mounting and two longer brackets that recess the switch by 2 inches are in the box, and there are threaded holes for 50 x 100 mm VESA plates.
How loud is the M4250-10G2F-PoE+?
Quiet mode, the default, is 27.38 dBA across the 0-125 W PoE load range, and Cool mode is 55 dBA at 25 °C. With the fans off it is specified up to an 80 W PoE load at 25 °C.
Does this switch have 10G uplink ports?
No. Its uplinks are Gigabit: 2 x 1000BASE-X SFP (1G) ports plus 2 additional 10/100/1000BASE-T RJ45 ports.
Does it support Layer 3 routing?
Yes. It is a Layer 2 and Layer 3 switch with static routing (64 IPv4 and 64 IPv6 routes), RIP, policy-based routing, PIM multicast routing and a DHCP server.
See all Netgear products or network switches from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 8 x 10/100/1000BASE-T PoE+ ports (IEEE 802.3at), 125 W PoE budget
- 2 x additional 10/100/1000BASE-T ports and 2 x 1000BASE-X SFP ports
- AV web GUI with profiles for Dante, Q-SYS, AES67, AVB, NDI and other AV-over-IP systems
- NETGEAR IGMP Plus, PTPv2 transparent clock and AVB support
- Layer 2/Layer 3: static, RIP and PIM routing, DHCP server, 4,093 VLANs
- 24 Gbps non-blocking fabric, 17.86 Mpps, 16K MAC addresses
- Selectable fan modes: fanless, quiet (27.38 dBA at full PoE load) or cool
- 1U rack mount with ports at the back or front; recessed and VESA mounting options
- 440 x 200 x 43.2 mm, 2.85 kg; internal power supply
- NETGEAR Enterprise Lifetime Warranty with 3 years of Sprint support
General
- Ports: 8 ports
- Power over Ethernet: PoE+ (802.3at)
- Ethernet: Gigabit
- Product type: AV Line fully managed switch (Layer 2 / Layer 3)
- Model name: AV Line M4250-10G2F-PoE+ (model number GSM4212P)
- Part number: GSM4212P-100EUS
- Brand: Netgear
- EAN: 606449149548
Ports
- Ethernet ports: 8 x 10/100/1000BASE-T RJ45 PoE+ plus 2 x 10/100/1000BASE-T RJ45
- Uplink ports: 2 x 1000BASE-X SFP (1G)
- Management ports: Out-of-band 1G Ethernet (RJ45, rear); console: RJ45 RS232 and USB-C (rear); USB-A storage (front)
Power over Ethernet
- PoE standard: IEEE 802.3af (up to 15.4 W per port) and IEEE 802.3at PoE+ (up to 30 W per port)
- PoE ports: 8
- PoE budget: 125 W
- PoE features: PoE timer / schedule (week, days, hours)
Performance
- Switching capacity: 24 Gbps (non-blocking fabric)
- Forwarding rate: 17.86 Mpps (64-byte frames)
- MAC address table: 16K entries
- Packet buffer: 16 Mb
- Jumbo frames: Up to 12 KB packet size
- Link aggregation: 8 LAGs with up to 8 ports per group
- Multicast groups: 4K total (2,048 IPv4 and 2,048 IPv6)
- MTBF: 778,769 hours at 25 °C
Security
- Security features: IEEE 802.1X, MAB and captive portal authentication, RADIUS/TACACS+, DHCP snooping, dynamic ARP inspection, IP source guard, ACLs
Management
- Management: AV web GUI with port-based AV profiles, main IT web GUI (HTTPS), CLI (console, Telnet, SSH), SNMP; NETGEAR Engage Controller
- Layer: Layer 2 and Layer 3 (static, RIP and PIM routing)
- Layer 2 features: 4,093 VLANs (802.1Q), Auto-Trunk and Auto-LAG between M4250 switches, static/LACP LAG, STP/RSTP/MSTP/PV(R)STP, IGMPv3/MLDv2 snooping, NETGEAR IGMP Plus, LLDP-MED
- Layer 3 features: Static routing (64 IPv4 / 64 IPv6 routes), RIP, policy-based routing, PIM-SM/PIM-DM/SSM multicast routing, DHCP server and relay
- AV features: Pre-configured for audio and video over IP; profiles for Dante, Q-SYS, AES67, AVB, NVX, SVSI, NDI and others; IEEE 1588 PTPv2 transparent clock; AVB (IEEE 802.1BA)
- Firmware: Dual firmware image
Power
- Power supply: 1 x internal PSU (C14 inlet) with on/off switch
- Maximum power consumption: 163.9 W (all ports used, maximum PoE load)
- Power consumption without PoE: 17.32 W
- Standby power consumption: 8.53 W
- Energy Efficient Ethernet: IEEE 802.3az (deactivated by default)
Physical
- Dimensions (W x D x H): 440 x 200 x 43.2 mm (1U)
- Weight: 2.85 kg
- Mounting: 1U 19-inch rack, ports at the back or reversed to the front; standard and 2-inch recessed brackets included; threaded holes for clamps (1 x M10) and 50 x 100 mm VESA plates (4 x M5)
- Cooling: Selectable fan modes: Fan Off, Quiet (default) and Cool; fan-off operation up to 80 W PoE load at 25 °C; side-to-side airflow
- Acoustic noise: Quiet mode 27.38 dBA (0-125 W PoE load); Cool mode 55 dBA (at 25 °C)
Environment
- Operating temperature: 0 to 45 °C
- Operating humidity: 90% maximum relative humidity, non-condensing
- Storage temperature: -20 to 70 °C
- Operating altitude: 3,000 m (10,000 ft) maximum
Warranty
- Manufacturer warranty: NETGEAR Enterprise Lifetime Warranty (hardware; product registration required within 90 days of purchase)
- Included support: 90 days of complimentary technical support; 3 years of Sprint support (24/5 technical support and advance RMA replacement)
- Switch
- Power cord(s)
- RJ45 straight-through serial console cable to DB9
- USB Type-C to USB-A 2.0 console cable
- Rubber caps for the SFP/SFP+ sockets
- Rubber footpads for tabletop installation
- Installation guide
- Two regular (short) brackets and screws for two-post rack mounting
- Two longer brackets for recessing the switch by 2 inches in the rack
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
