Netgear
GSM4230P-100EUSNETGEAR AV Line M4250-26G4F-PoE+ 24-Port Gigabit PoE+ Managed Switch, 300 W, 2 x 1G, 4 x SFP (GSM4230P-100EUS)
The NETGEAR AV Line M4250-26G4F-PoE+ 24-Port Gigabit PoE+ Managed Switch, 300 W, 2 x 1G, 4 x SFP (GSM4230P-100EUS) is a genuine Netgear product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.
The NETGEAR AV Line M4250-26G4F-PoE+ is a fully managed switch built for audio and video over IP installations - conference rooms, studios, live venues and similar - and for general IT use where PoE and Layer 3 features are needed. It is a 24-port PoE+ rack-mount model for audio installations and standalone video systems that use Gigabit uplinks.
It has 24 x 10/100/1000BASE-T PoE+ ports with a 300 W PoE budget, two further Gigabit RJ45 ports and four 1G SFP ports, on a 60 Gbps non-blocking fabric. The switch is pre-configured for AV over IP, with port-based profiles for Dante, Q-SYS, AES67, AVB, NDI and other systems in a dedicated AV web interface, NETGEAR IGMP Plus for multicast between switches, and Layer 3 features including static, RIP and PIM routing.
The 1U chassis has a black display panel at the front and all ports at the back, and can be reversed so the ports face the front of the rack. It is covered by the NETGEAR Enterprise Lifetime Warranty, with three years of Sprint support included. Fan modes can be set for fanless, quiet or cool operation; fanless running is specified up to a 45 W PoE load at 25 °C with the SFP ports unused.
What the Netgear GSM4230P-100EUS is used for
- Powering an audio installation or standalone video system from a 24 port PoE switch with a 300 W PoE+ budget
- Carrying Dante, Q-SYS, AES67, AVB and NDI traffic with pre-configured AV profiles and NETGEAR IGMP Plus between switches
- Uplinking over Gigabit fibre through 4 x 1G SFP ports, with 2 further Gigabit RJ45 ports
- A 1U rack switch whose ports sit at the back or are reversed to the front, with 2-inch recessed brackets supplied
Netgear GSM4230P-100EUS: common questions
How much PoE power does the GSM4230P-100EUS provide?
300 W in total across 24 PoE+ ports, with up to 30 W per port (IEEE 802.3at). A PoE timer schedules power by week, day and hour.
How loud is the M4250-26G4F-PoE+?
In Quiet mode, the default, it is 28 dBA with a PoE load of up to 200 W and 34 dBA at 200-300 W. Cool mode is 57 dBA at 25 °C. Fan-off operation is specified up to a 45 W PoE load at 25 °C with the SFP ports unused.
Does the M4250-26G4F-PoE+ have 10G ports?
No. The 4 uplink ports are 1000BASE-X SFP (1G), and there are 2 additional 10/100/1000BASE-T RJ45 ports.
Is it a Layer 3 switch?
Yes. It works at Layer 2 and Layer 3, with static routing (64 IPv4 and 64 IPv6 routes), RIP, policy-based routing and PIM multicast routing.
What warranty and support come with the switch?
The NETGEAR Enterprise Lifetime Warranty on hardware (registration within 90 days of purchase), 90 days of complimentary technical support and 3 years of Sprint support with 24/5 technical support and advance RMA replacement.
See all Netgear products or network switches from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 24 x 10/100/1000BASE-T PoE+ ports (IEEE 802.3at), 300 W PoE budget
- 2 x additional 10/100/1000BASE-T ports and 4 x 1000BASE-X SFP ports
- AV web GUI with profiles for Dante, Q-SYS, AES67, AVB, NDI and other AV-over-IP systems
- NETGEAR IGMP Plus, PTPv2 transparent clock and AVB support
- Layer 2/Layer 3: static, RIP and PIM routing, DHCP server, 4,093 VLANs
- 60 Gbps non-blocking fabric, 44.64 Mpps, 16K MAC addresses
- Selectable fan modes: fanless, quiet (28 dBA up to 200 W PoE load) or cool
- 1U rack mount with ports at the back or front; recessed and VESA mounting options
- 440 x 257 x 43.2 mm, 4.30 kg; internal power supply
- NETGEAR Enterprise Lifetime Warranty with 3 years of Sprint support
General
- Ports: 24 ports
- Power over Ethernet: PoE+ (802.3at)
- Ethernet: Gigabit
- Product type: AV Line fully managed switch (Layer 2 / Layer 3)
- Model name: AV Line M4250-26G4F-PoE+ (model number GSM4230P)
- Part number: GSM4230P-100EUS
- Brand: Netgear
- EAN: 606449151671
Ports
- Ethernet ports: 24 x 10/100/1000BASE-T RJ45 PoE+ plus 2 x 10/100/1000BASE-T RJ45
- Uplink ports: 4 x 1000BASE-X SFP (1G)
- Management ports: Out-of-band 1G Ethernet (RJ45, rear); console: RJ45 RS232 and USB-C (rear); USB-A storage (front)
Power over Ethernet
- PoE standard: IEEE 802.3af (up to 15.4 W per port) and IEEE 802.3at PoE+ (up to 30 W per port)
- PoE ports: 24
- PoE budget: 300 W
- PoE features: PoE timer / schedule (week, days, hours)
Performance
- Switching capacity: 60 Gbps (non-blocking fabric)
- Forwarding rate: 44.64 Mpps (64-byte frames)
- MAC address table: 16K entries
- Packet buffer: 16 Mb
- Jumbo frames: Up to 12 KB packet size
- Link aggregation: 8 LAGs with up to 8 ports per group
- Multicast groups: 4K total (2,048 IPv4 and 2,048 IPv6)
- MTBF: 511,054 hours at 25 °C
Security
- Security features: IEEE 802.1X, MAB and captive portal authentication, RADIUS/TACACS+, DHCP snooping, dynamic ARP inspection, IP source guard, ACLs
Management
- Management: AV web GUI with port-based AV profiles, main IT web GUI (HTTPS), CLI (console, Telnet, SSH), SNMP; NETGEAR Engage Controller
- Layer: Layer 2 and Layer 3 (static, RIP and PIM routing)
- Layer 2 features: 4,093 VLANs (802.1Q), Auto-Trunk and Auto-LAG between M4250 switches, static/LACP LAG, STP/RSTP/MSTP/PV(R)STP, IGMPv3/MLDv2 snooping, NETGEAR IGMP Plus, LLDP-MED
- Layer 3 features: Static routing (64 IPv4 / 64 IPv6 routes), RIP, policy-based routing, PIM-SM/PIM-DM/SSM multicast routing, DHCP server and relay
- AV features: Pre-configured for audio and video over IP; profiles for Dante, Q-SYS, AES67, AVB, NVX, SVSI, NDI and others; IEEE 1588 PTPv2 transparent clock; AVB (IEEE 802.1BA)
- Firmware: Dual firmware image
Power
- Power supply: 1 x internal PSU (C14 inlet) with on/off switch
- Maximum power consumption: 401 W (all ports used, maximum PoE load)
- Power consumption without PoE: 35.8 W
- Standby power consumption: 23.4 W
- Energy Efficient Ethernet: IEEE 802.3az (deactivated by default)
Physical
- Dimensions (W x D x H): 440 x 257 x 43.2 mm (1U)
- Weight: 4.30 kg
- Mounting: 1U 19-inch rack, ports at the back or reversed to the front; standard and 2-inch recessed brackets included; threaded holes for clamps (1 x M10) and 50 x 100 mm VESA plates (4 x M5)
- Cooling: Selectable fan modes: Fan Off, Quiet (default) and Cool; fan-off operation up to 45 W PoE load at 25 °C (no SFP); side-to-side airflow
- Acoustic noise: Quiet mode 28 dBA (0-200 W PoE load) to 34 dBA (200-300 W); Cool mode 57 dBA (at 25 °C)
Environment
- Operating temperature: 0 to 45 °C
- Operating humidity: 90% maximum relative humidity, non-condensing
- Storage temperature: -20 to 70 °C
- Operating altitude: 3,000 m (10,000 ft) maximum
Warranty
- Manufacturer warranty: NETGEAR Enterprise Lifetime Warranty (hardware; product registration required within 90 days of purchase)
- Included support: 90 days of complimentary technical support; 3 years of Sprint support (24/5 technical support and advance RMA replacement)
- Switch
- Power cord(s)
- RJ45 straight-through serial console cable to DB9
- USB Type-C to USB-A 2.0 console cable
- Rubber caps for the SFP/SFP+ sockets
- Rubber footpads for tabletop installation
- Installation guide
- Two regular (short) brackets and screws for two-post rack mounting
- Two longer brackets for recessing the switch by 2 inches in the rack
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
