Netgear
GSM4248PX-100EUSNETGEAR AV Line M4250-40G8XF-PoE+ 40-Port Gigabit PoE+ Managed Switch, 960 W, 8 x 10G SFP+ (GSM4248PX-100EUS)
The NETGEAR AV Line M4250-40G8XF-PoE+ 40-Port Gigabit PoE+ Managed Switch, 960 W, 8 x 10G SFP+ (GSM4248PX-100EUS) is a genuine Netgear product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.
The NETGEAR AV Line M4250-40G8XF-PoE+ is a fully managed switch built for audio and video over IP installations - conference rooms, studios, live venues and similar - and for general IT use where PoE and Layer 3 features are needed. It is a high-density model for larger 1G video-over-IP deployments that need 10G uplinks or links between switches.
It has 40 x 10/100/1000BASE-T PoE+ ports with a 960 W PoE budget and eight SFP+ ports that take 1G or 10G modules, on a 240 Gbps non-blocking fabric. The switch is pre-configured for AV over IP, with port-based profiles for Dante, Q-SYS, AES67, AVB, NDI and other systems in a dedicated AV web interface, NETGEAR IGMP Plus for multicast between switches, and Layer 3 features including static, RIP and PIM routing.
The 1U chassis is 400 mm deep, with a black display panel at the front and all ports at the back; it can be reversed so the ports face the front of the rack. Fan modes are quiet or cool - this model has no fan-off mode. It is covered by the NETGEAR Enterprise Lifetime Warranty, with three years of Sprint support included.
What the Netgear GSM4248PX-100EUS is used for
- Connecting a larger 1G video-over-IP deployment with 40 PoE+ ports and a 960 W PoE budget in 1U
- Linking switches or uplinking to the core at 10G through 8 SFP+ ports that take 1G or 10G modules
- A fully managed switch for conference rooms, studios and live venues, pre-configured with profiles for Dante, Q-SYS, AES67, AVB and NDI
Netgear GSM4248PX-100EUS: common questions
How much PoE power does the GSM4248PX-100EUS provide?
960 W in total across 40 PoE+ ports, with up to 30 W per port (IEEE 802.3at).
How many 10G ports does the M4250-40G8XF-PoE+ have?
8 SFP+ ports, each taking a 1G or 10G module (1000/10GBASE-X). They serve as uplinks or as links between switches.
Can this switch run with its fans off?
No. Fan-off mode is not supported on this model. Quiet mode, the default, is 29 dBA with a PoE load of up to 400 W and 59 dBA at 880-960 W; Cool mode is 69 dBA at 25 °C.
How deep is the M4250-40G8XF-PoE+?
400 mm. The 1U chassis measures 440 x 400 x 43.2 mm and weighs 6.31 kg, with ports at the back or reversed to the front of the rack.
Is the power supply built in?
Yes. There is 1 internal PSU with a C14 inlet and an on/off switch. Maximum power consumption is 1,197 W with all ports used at maximum PoE load.
See all Netgear products or network switches from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 40 x 10/100/1000BASE-T PoE+ ports (IEEE 802.3at), 960 W PoE budget
- 8 x 1G/10G SFP+ uplink ports
- AV web GUI with profiles for Dante, Q-SYS, AES67, AVB, NDI and other AV-over-IP systems
- NETGEAR IGMP Plus, PTPv2 transparent clock and AVB support
- Layer 2/Layer 3: static, RIP and PIM routing, DHCP server, 4,093 VLANs
- 240 Gbps non-blocking fabric, 178.56 Mpps, 16K MAC addresses
- 1U rack mount with ports at the back or front; recessed and VESA mounting options
- 440 x 400 x 43.2 mm, 6.31 kg; internal power supply; quiet or cool fan modes
- Out-of-band 1G management port, RJ45 and USB-C console ports, USB-A storage port
- NETGEAR Enterprise Lifetime Warranty with 3 years of Sprint support
General
- Ports: 40 ports
- Power over Ethernet: PoE+ (802.3at)
- USB: USB-C
- Ethernet: Gigabit
- Product type: AV Line fully managed switch (Layer 2 / Layer 3)
- Model name: AV Line M4250-40G8XF-PoE+ (model number GSM4248PX)
- Part number: GSM4248PX-100EUS
- Brand: Netgear
- EAN: 606449151732
Ports
- Ethernet ports: 40 x 10/100/1000BASE-T RJ45 PoE+
- Uplink ports: 8 x 1000/10GBASE-X SFP+ (1G/10G)
- Management ports: Out-of-band 1G Ethernet (RJ45, rear); console: RJ45 RS232 and USB-C (rear); USB-A storage (front)
Power over Ethernet
- PoE standard: IEEE 802.3af (up to 15.4 W per port) and IEEE 802.3at PoE+ (up to 30 W per port)
- PoE ports: 40
- PoE budget: 960 W
- PoE features: PoE timer / schedule (week, days, hours)
Performance
- Switching capacity: 240 Gbps (non-blocking fabric)
- Forwarding rate: 178.56 Mpps (64-byte frames)
- MAC address table: 16K entries
- Packet buffer: 32 Mb
- Jumbo frames: Up to 12 KB packet size
- Link aggregation: 8 LAGs with up to 8 ports per group
- Multicast groups: 4K total (2,048 IPv4 and 2,048 IPv6)
- MTBF: 487,900 hours at 25 °C
Security
- Security features: IEEE 802.1X, MAB and captive portal authentication, RADIUS/TACACS+, DHCP snooping, dynamic ARP inspection, IP source guard, ACLs
Management
- Management: AV web GUI with port-based AV profiles, main IT web GUI (HTTPS), CLI (console, Telnet, SSH), SNMP; NETGEAR Engage Controller
- Layer: Layer 2 and Layer 3 (static, RIP and PIM routing)
- Layer 2 features: 4,093 VLANs (802.1Q), Auto-Trunk and Auto-LAG between M4250 switches, static/LACP LAG, STP/RSTP/MSTP/PV(R)STP, IGMPv3/MLDv2 snooping, NETGEAR IGMP Plus, LLDP-MED
- Layer 3 features: Static routing (64 IPv4 / 64 IPv6 routes), RIP, policy-based routing, PIM-SM/PIM-DM/SSM multicast routing, DHCP server and relay
- AV features: Pre-configured for audio and video over IP; profiles for Dante, Q-SYS, AES67, AVB, NVX, SVSI, NDI and others; IEEE 1588 PTPv2 transparent clock; AVB (IEEE 802.1BA)
- Firmware: Dual firmware image
Power
- Power supply: 1 x internal PSU (C14 inlet) with on/off switch
- Maximum power consumption: 1,197 W (all ports used, maximum PoE load)
- Power consumption without PoE: 89.2 W
- Standby power consumption: 74.5 W
- Energy Efficient Ethernet: IEEE 802.3az (deactivated by default)
Physical
- Dimensions (W x D x H): 440 x 400 x 43.2 mm (1U)
- Weight: 6.31 kg
- Mounting: 1U 19-inch rack, ports at the back or reversed to the front; standard and 2-inch recessed brackets included; threaded holes for clamps (1 x M10) and 50 x 100 mm VESA plates (4 x M5)
- Cooling: Selectable fan modes: Quiet (default) and Cool (fan-off mode not supported); side-to-side airflow
- Acoustic noise: Quiet mode 29 dBA (0-400 W PoE load) to 59 dBA (880-960 W); Cool mode 69 dBA (at 25 °C)
Environment
- Operating temperature: 0 to 45 °C
- Operating humidity: 90% maximum relative humidity, non-condensing
- Storage temperature: -20 to 70 °C
- Operating altitude: 3,000 m (10,000 ft) maximum
Compatibility
- Optional rack accessory: RBS1830 adjustable rear brackets for 4-post installation in 18 to 30 inch racks (sold separately)
Warranty
- Manufacturer warranty: NETGEAR Enterprise Lifetime Warranty (hardware; product registration required within 90 days of purchase)
- Included support: 90 days of complimentary technical support; 3 years of Sprint support (24/5 technical support and advance RMA replacement)
- Switch
- Power cord(s)
- RJ45 straight-through serial console cable to DB9
- USB Type-C to USB-A 2.0 console cable
- Rubber caps for the SFP/SFP+ sockets
- Rubber footpads for tabletop installation
- Installation guide
- Two regular (short) brackets and screws for two-post rack mounting
- Two longer brackets for recessing the switch by 2 inches in the rack
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
