Netgear
GSM4210PD-100EUSNETGEAR AV Line M4250-9G1F-PoE+ 8-Port Gigabit PoE+ Managed Desktop Switch, 110 W, 1 x SFP (GSM4210PD-100EUS)
The NETGEAR AV Line M4250-9G1F-PoE+ 8-Port Gigabit PoE+ Managed Desktop Switch, 110 W, 1 x SFP (GSM4210PD-100EUS) is a genuine Netgear product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.
The NETGEAR AV Line M4250-9G1F-PoE+ is a fully managed switch built for audio and video over IP installations - conference rooms, studios, live venues and similar - and for general IT use where PoE and Layer 3 features are needed. This is the fanless desktop model, meant for use outside the AV rack: on a table, on the wall, under a table or behind a screen.
It has eight 10/100/1000BASE-T PoE+ ports with a 110 W PoE budget, one further Gigabit RJ45 port and one 1G SFP port, on a 20 Gbps non-blocking fabric. The switch is pre-configured for AV over IP, with port-based profiles for Dante, Q-SYS, AES67, AVB, NDI and other systems in a dedicated AV web interface, NETGEAR IGMP Plus for multicast between switches, and Layer 3 features including static, RIP and PIM routing.
Power comes from the supplied external 130 W adapter, which takes a standard C13 power cord. The switch is completely fanless and is covered by the NETGEAR Enterprise Lifetime Warranty, with three years of Sprint support included.
What the Netgear GSM4210PD-100EUS is used for
- Carrying Dante, Q-SYS, AES67, AVB or NDI audio and video over IP in a conference room, studio or live venue, using pre-set port profiles
- A silent 8 port PoE switch for use outside the AV rack: fanless, with flange brackets for a wall, under a table or behind a screen
- Powering AV endpoints from 8 PoE+ ports sharing 110 W, with a further Gigabit port and a 1G SFP port for the uplink
Netgear GSM4210PD-100EUS: common questions
How much PoE power does the GSM4210PD-100EUS provide?
110 W in total across 8 PoE+ ports, with up to 30 W per port (IEEE 802.3at). PoE can be scheduled by week, day and hour.
Is the M4250-9G1F-PoE+ fanless?
Yes. It is completely fanless (0 dBA), which is why it can be used on a table, on a wall, under a table or behind a screen.
What uplink ports does this desktop switch have?
1 x 1000BASE-X SFP port (1G) and 1 additional 10/100/1000BASE-T RJ45 port, alongside the 8 PoE+ ports. There is also an out-of-band 1G management port at the rear.
Is a power supply included with the switch?
Yes. An external 130 W power adapter is supplied with power cord(s); it takes a standard C13 cord. The adapter measures 169 x 72 x 35.5 mm and weighs 0.55 kg.
Does the M4250-9G1F-PoE+ support Layer 3 routing?
Yes. It is a Layer 2 and Layer 3 switch with static routing (64 IPv4 and 64 IPv6 routes), RIP, policy-based routing and PIM multicast routing, plus a DHCP server and relay.
See all Netgear products or network switches from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 8 x 10/100/1000BASE-T PoE+ ports (IEEE 802.3at), 110 W PoE budget
- 1 x additional 10/100/1000BASE-T port and 1 x 1000BASE-X SFP port
- Totally fanless desktop design, 210 x 140 x 40 mm, 0.965 kg
- AV web GUI with profiles for Dante, Q-SYS, AES67, AVB, NDI and other AV-over-IP systems
- NETGEAR IGMP Plus, PTPv2 transparent clock and AVB support
- Layer 2/Layer 3: static, RIP and PIM routing, DHCP server, 4,093 VLANs
- 20 Gbps non-blocking fabric, 16K MAC addresses
- Out-of-band 1G management port, USB-C console and USB-A storage port
- Flange brackets included for wall, under-table or behind-screen mounting
- External 130 W power adapter; NETGEAR Enterprise Lifetime Warranty
General
- Ports: 8 ports
- Power over Ethernet: PoE+ (802.3at)
- USB: USB-C
- Ethernet: Gigabit
- Product type: AV Line fully managed switch (Layer 2 / Layer 3)
- Model name: AV Line M4250-9G1F-PoE+ (model number GSM4210PD)
- Part number: GSM4210PD-100EUS
- Brand: Netgear
- EAN: 606449160192
Ports
- Ethernet ports: 8 x 10/100/1000BASE-T RJ45 PoE+ plus 1 x 10/100/1000BASE-T RJ45
- Uplink ports: 1 x 1000BASE-X SFP (1G)
- Management ports: Out-of-band 1G Ethernet (RJ45, rear); console: USB-C (front); USB-A storage (rear)
Power over Ethernet
- PoE standard: IEEE 802.3af (up to 15.4 W per port) and IEEE 802.3at PoE+ (up to 30 W per port)
- PoE ports: 8
- PoE budget: 110 W
- PoE features: PoE timer / schedule (week, days, hours)
Performance
- Switching capacity: 20 Gbps (non-blocking fabric)
- MAC address table: 16K entries
- Packet buffer: 16 Mb
- Jumbo frames: Up to 12 KB packet size
- Link aggregation: 8 LAGs with up to 8 ports per group
- Multicast groups: 4K total (2,048 IPv4 and 2,048 IPv6)
- MTBF: 1,020,808 hours at 25 °C
Security
- Security features: IEEE 802.1X, MAB and captive portal authentication, RADIUS/TACACS+, DHCP snooping, dynamic ARP inspection, IP source guard, ACLs
Management
- Management: AV web GUI with port-based AV profiles, main IT web GUI (HTTPS), CLI (console, Telnet, SSH), SNMP; NETGEAR Engage Controller
- Layer: Layer 2 and Layer 3 (static, RIP and PIM routing)
- Layer 2 features: 4,093 VLANs (802.1Q), Auto-Trunk and Auto-LAG between M4250 switches, static/LACP LAG, STP/RSTP/MSTP/PV(R)STP, IGMPv3/MLDv2 snooping, NETGEAR IGMP Plus, LLDP-MED
- Layer 3 features: Static routing (64 IPv4 / 64 IPv6 routes), RIP, policy-based routing, PIM-SM/PIM-DM/SSM multicast routing, DHCP server and relay
- AV features: Pre-configured for audio and video over IP; profiles for Dante, Q-SYS, AES67, AVB, NVX, SVSI, NDI and others; IEEE 1588 PTPv2 transparent clock; AVB (IEEE 802.1BA)
- Firmware: Dual firmware image
Power
- Power supply: 1 x external power adapter (130 W) with C14 inlet for a standard C13 power cord
- Maximum power consumption: 132.25 W (all ports used, maximum PoE load)
- Power consumption without PoE: 9.88 W
- Standby power consumption: 6.4 W
- Energy Efficient Ethernet: IEEE 802.3az (deactivated by default)
Physical
- Dimensions (W x D x H): 210 x 140 x 40 mm (power adapter: 169 x 72 x 35.5 mm)
- Weight: 0.965 kg (power adapter: 0.55 kg)
- Mounting: Desktop, or on a wall, under a table or behind a screen with the included flange brackets
- Cooling: Fanless
- Acoustic noise: 0 dBA (fanless)
Environment
- Operating temperature: 0 to 45 °C
- Operating humidity: 90% maximum relative humidity, non-condensing
- Storage temperature: -20 to 70 °C
- Operating altitude: 3,000 m (10,000 ft) maximum
Warranty
- Manufacturer warranty: NETGEAR Enterprise Lifetime Warranty (hardware; product registration required within 90 days of purchase)
- Included support: 90 days of complimentary technical support; 3 years of Sprint support (24/5 technical support and advance RMA replacement)
- Switch
- External power adapter (standard C13 inlet)
- Power cord(s)
- USB Type-C to USB-A 2.0 console cable
- Rubber caps for the SFP/SFP+ sockets
- Rubber footpads for tabletop installation
- Installation guide
- Two brackets and screws for flange mounting (wall, under a table or behind a screen)
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
