Netgear
GSM4352-100NESNETGEAR M4350-48G4XF 48-Port Gigabit PoE+ Fully Managed Switch, 236 W, 4 x 10G SFP+ (GSM4352-100NES)
The NETGEAR M4350-48G4XF 48-Port Gigabit PoE+ Fully Managed Switch, 236 W, 4 x 10G SFP+ (GSM4352-100NES) is a genuine Netgear product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.
The NETGEAR M4350-48G4XF is a fully managed, stackable 48-port Gigabit PoE+ switch from the M4350 AV and IT series. It is intended for the network edge in AV-over-IP installations and in campus or office networks, where it connects and powers a high density of endpoints - AV encoders and decoders, IP phones, cameras and wireless access points - with 10G fibre uplinks to the core.
It has 48 x 10M/100M/1G RJ45 PoE+ ports and four SFP+ uplinks that take 1G or 10G modules, on a 176 Gbps line-rate fabric. As supplied, the fixed 550 W internal power supply gives a 236 W PoE budget. Two bays accept modular power supplies (APS350W, APS600Wv2, APS920W or APS2000W, sold separately) for redundancy and/or power sharing, and with these the PoE budget can be raised to as much as 1,440 W.
Software is the same across the M4350 range and needs no licence: Layer 2 switching, static, policy-based and dynamic routing (RIP, VRRP, OSPF, PIM), NETGEAR IGMP Plus, the AV user interface with pre-configured AV profiles, and virtual chassis stacking of up to eight switches with non-stop forwarding. It is covered by the NETGEAR Enterprise Lifetime Warranty with three years of Sprint support included.
What the Netgear GSM4352-100NES is used for
- Connecting a high density of AV encoders and decoders, IP phones, cameras and access points at the network edge with 48 Gigabit PoE+ ports
- A 48-port stackable switch with 4 SFP+ uplinks for 10G fibre links to the core in campus, office or AV-over-IP networks
- Scaling PoE from the 236 W supplied to as much as 1,440 W by adding modular power supplies in its 2 bays
- Layer 3 routing with RIP, VRRP, OSPF and PIM, with every software feature available without a licence
Netgear GSM4352-100NES: common questions
How much PoE power does the GSM4352-100NES provide?
236 W as supplied, from the fixed 550 W internal power supply, across 48 PoE+ ports at up to 30 W each. Modular power supplies, sold separately, raise the budget to as much as 1,440 W.
Which power supplies raise the PoE budget on the M4350-48G4XF?
The 2 bays take APS350W, APS600Wv2, APS920W or APS2000W modules, sold separately. With the internal PSU plus one module the budget is 436 W (APS350W), 636 W (APS600Wv2) or 892 W (APS920W); 2 x APS920W gives 1,440 W.
Is the M4350-48G4XF stackable?
Yes. Up to 8 switches form a virtual chassis stack with non-stop forwarding and hitless failover, using 10G ports as stacking ports. A stack cannot run AVB or PTP.
Is a licence needed for Layer 3 routing?
No. All software features, including Layer 2 switching, Layer 3 dynamic routing (RIP, VRRP, OSPF, PIM) and AVB, are available without a licence.
How deep is it, and which rack brackets are supplied?
The 1U chassis measures 440 x 400 x 43.2 mm and weighs 7.19 kg. Standard rack brackets and longer brackets for recessed mounting are included; RBS1830 rear brackets for 4-post racks are sold separately.
See all Netgear products or network switches from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 48 x 10/100/1000BASE-T PoE+ ports (IEEE 802.3at)
- 236 W PoE budget from the internal PSU; up to 1,440 W with optional modular PSUs
- 4 x 1G/10G SFP+ uplink ports
- Stackable: up to 8 switches with non-stop forwarding and hitless failover
- Layer 3: static, policy-based and dynamic routing (RIP, VRRP, OSPF, PIM)
- AV user interface, NETGEAR IGMP Plus and Engage Controller support; no licence needed
- 176 Gbps line-rate fabric, 130.94 Mpps, 16K MAC addresses
- 550 W internal PSU plus 2 bays for modular PSUs (redundancy and/or power sharing)
- 1U, 440 x 400 x 43.2 mm, 7.19 kg; front-to-back cooling, 33 dBA in quiet mode at 25 °C
- NETGEAR Enterprise Lifetime Warranty with 3 years of Sprint support
General
- Ports: 48 ports
- Power over Ethernet: PoE+ (802.3at)
- Ethernet: Gigabit
- Product type: AV and IT fully managed stackable switch (Layer 2 / Layer 3)
- Model name: M4350-48G4XF (model number GSM4352)
- Part number: GSM4352-100NES
- Brand: Netgear
- EAN: 606449161953
Ports
- Ethernet ports: 48 x 10/100/1000BASE-T RJ45 PoE+
- Uplink ports: 4 x 1000/10GBASE-X SFP+ (1G/10G)
- Management ports: Out-of-band 1G Ethernet (RJ45, back); console: USB-C (front); 2 x USB-A storage (back)
Power over Ethernet
- PoE standard: IEEE 802.3af (15.4 W) and IEEE 802.3at PoE+ (30 W)
- PoE ports: 48
- PoE budget: 236 W with the internal PSU only; up to 1,440 W with modular PSUs added
- PoE budget with modular PSUs: Internal PSU plus one module: 436 W (APS350W), 636 W (APS600Wv2), 892 W (APS920W), 1,440 W (APS2000W at 220 V AC); plus two modules: 716 W (2 x APS350W), 1,116 W (2 x APS600Wv2), 1,440 W (2 x APS920W)
Performance
- Switching capacity: 176 Gbps (line-rate)
- Forwarding rate: 130.94 Mpps (64-byte frames)
- MAC address table: 16K entries
- Packet buffer: 32 Mb
- Jumbo frames: Up to 12 KB packet size
- Link aggregation: 64 LAGs with up to 8 ports per group
- Multicast groups: 4K total (2,048 IPv4 and 2,048 IPv6)
- Static routes: 256 IPv4 and 64 IPv6
- MTBF: 623,591 hours at 25 °C
Security
- Security features: IEEE 802.1X, MAB and captive portal authentication, RADIUS/TACACS, DHCP snooping, dynamic ARP inspection, IP source guard, ACLs
Management
- Management: AV web GUI with port-based AV profiles, main IT web GUI (HTTPS), CLI (console, Telnet, SSH), SNMP; NETGEAR Engage Controller
- Layer: Layer 2 and Layer 3 (static, policy-based and dynamic routing)
- Layer 2 features: 4,093 VLANs (802.1Q), Auto-Trunk and Auto-LAG, static/LACP LAG, STP/RSTP/MSTP/PV(R)STP, IGMPv3/MLDv2 snooping, NETGEAR IGMP Plus, LLDP-MED
- Layer 3 features: Static and policy-based routing, RIP, VRRP, OSPF and PIM (PIM-SM/PIM-DM/SSM) dynamic routing, DHCP server and relay
- Stacking: Virtual chassis stacking of up to 8 switches with non-stop forwarding (NSF) and hitless failover; any 10G, 25G or 100G port can be used as a stacking port
- Stacking limitation: Stacking, AVB and PTP transparent clock are mutually exclusive - a stack cannot run AVB or PTP
- AV features: AV user interface and Engage Controller with pre-configured profiles for Dante, Q-SYS, AES67, AVB, NVX, NDI, SDVoE and others; IEEE 1588 PTPv2; AVB
- Licensing: All software features (Layer 2 switching, Layer 3 dynamic routing, AVB) are available without a licence
Power
- Power supply: 1 x internal 550 W PSU (C14 connector) with on/off switch
- Modular power supply bays: 2 slots for APS350W, APS600Wv2, APS920W or APS2000W (sold separately) - 1+1 redundancy and/or EPS power sharing
- Standby power consumption: 48.5 W
- Power consumption without PoE: 99 W
- Power consumption, full PoE on internal PSU: 348 W
- Maximum power consumption: 1,618.3 W (maximum PoE budget with modular PSUs)
- Energy Efficient Ethernet: IEEE 802.3az (disabled by default)
Physical
- Dimensions (W x D x H): 440 x 400 x 43.2 mm (1U)
- Weight: 7.19 kg
- Mounting: 1U 19-inch rack (standard brackets and longer brackets for recessed mounting included); rubber footpads for tabletop use
- Cooling: Fixed fans, front-to-back airflow; Quiet (default) and Cool fan modes
- Acoustic noise: Quiet mode 33 dBA at 25 °C (1,440 W PoE load); Cool mode 52 dBA
Environment
- Operating temperature: 0 to 45 °C
- Operating humidity: 90% maximum relative humidity, non-condensing
- Storage temperature: -20 to 70 °C
- Operating altitude: 3,000 m (10,000 ft) maximum
Compatibility
- Optional rack accessory: RBS1830 adjustable rear brackets for 4-post installation in 18 to 30 inch racks (sold separately)
Warranty
- Manufacturer warranty: NETGEAR Enterprise Lifetime Warranty (hardware; product registration required within 90 days of purchase)
- Included support: 90 days of complimentary technical support; 3 years of Sprint support (24/5 technical support and advance RMA replacement)
- Switch
- Power cord(s)
- USB Type-C to USB-A 2.0 console cable
- Rubber caps for the SFP+/SFP28/QSFP28 sockets
- Rubber footpads for tabletop installation
- Installation guide
- Rack-mounting standard brackets
- Longer brackets for recessed mounting
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
