Netgear XSM4556-100EUS

NETGEAR M4500-48XF8C 48-Port 10G/25G SFP28 Fully Managed Switch, 8 x 100G QSFP28 (XSM4556-100EUS)

Exc VAT £17,170.00
Inc VAT £20,604.00
1Low stock
Buying for a project? Volume pricing and stock allocation 0333 242 1314 · sales@clisecure.com Get a quote

The NETGEAR M4500-48XF8C 48-Port 10G/25G SFP28 Fully Managed Switch, 8 x 100G QSFP28 (XSM4556-100EUS) is a genuine Netgear product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.

The NETGEAR M4500-48XF8C is a fully managed 25G/100G switch from the M4500 series, built for large AV-over-IP systems and for data-centre style leaf, spine and core roles in IT networks. NETGEAR positions it for installations with hundreds of AV endpoints, such as SDVoE video distribution, where a single high-capacity Layer 2 fabric with IGMP Plus replaces more complex Layer 3 multicast designs.

It has 48 SFP28 ports that run at 1G, 10G or 25G - set in groups of four ports and pre-configured for 10G - and eight QSFP28 ports that run at 40G, 50G or 100G or break out to 4 x 25G or 4 x 10G, pre-configured for 100G. The fabric is 4 Tbps non-blocking with a 256 Mb packet buffer and a 32K MAC address table. Layer 3 features include static and dynamic routing with VRRP, OSPF, BGP, VRF-Lite and PIM-SM/SSM, and Multi-chassis Link Aggregation (MLAG) is supported.

The switch ships with two APS750W modular power supplies (1+1 redundancy) and six AFT402 fan trays (4+2 redundancy) already installed, with front-to-back airflow, plus rack ears and a rear rail kit. It is covered by the NETGEAR Enterprise Lifetime Warranty with three years of Sprint support included.

What the Netgear XSM4556-100EUS is used for

  • Building a single Layer 2 fabric for large AV-over-IP systems with hundreds of endpoints, such as SDVoE video distribution
  • Leaf, spine or core switching in a data-centre style network, with 48 SFP28 ports at 1G, 10G or 25G and 8 QSFP28 ports at up to 100G
  • Redundant operation in 1U of rack space, with two power supplies (1+1) and six fan trays (4+2) already installed
  • A Layer 3 switch with dynamic routing over VRRP, OSPF, BGP, VRF-Lite and PIM-SM/SSM, plus Multi-chassis Link Aggregation (MLAG)

Netgear XSM4556-100EUS: common questions

What ports does the XSM4556-100EUS have?

48 SFP28 ports that run at 1G, 10G or 25G, set in groups of four and pre-configured for 10G, and 8 QSFP28 ports that run at 40G, 50G or 100G, pre-configured for 100G. It has no PoE ports.

Can the QSFP28 ports on the M4500-48XF8C break out?

Yes. Each QSFP28 port can break out to 4 x 25G or 4 x 10G, or run as a single 100G, 50G or 40G port.

Are power supplies and fans included?

Yes. The switch ships with 2 APS750W modular power supplies (1+1 redundancy) and 6 AFT402 fan trays (4+2 redundancy) already installed. Spare power supplies and fan trays are sold separately.

Is a rack kit included, and how deep is the switch?

Yes. Two front mounting ears and one rear rail kit are in the box. The 1U chassis measures 440 x 508 x 43.2 mm and weighs 9.73 kg.

How loud is the M4500-48XF8C?

68 dB at 25 °C. Cooling is front-to-back through the fan trays, with fan speed control.

Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.

  • 48 x SFP28 ports: 1G, 10G or 25G (configurable per group of 4; pre-configured for 10G)
  • 8 x QSFP28 ports: 40G, 50G or 100G, or 4 x 25G / 4 x 10G breakout (pre-configured for 100G)
  • 4 Tbps non-blocking fabric, 2 Bpps throughput, 256 Mb packet buffer
  • 32K MAC addresses, 4,093 VLANs, 32K IPv4 and 24K IPv6 routes
  • Layer 3: static and dynamic routing with VRRP, OSPF, BGP, VRF-Lite and PIM-SM/SSM
  • MLAG (63 groups), 64 LAGs; NETGEAR IGMP Plus, Auto-LAG and Auto-Trunk
  • 2 x APS750W modular PSUs (1+1) and 6 x AFT402 fan trays (4+2) pre-installed
  • Out-of-band 1G management port, RJ45 RS232 console port and USB storage port on the front
  • 1U, 440 x 508 x 43.2 mm, 9.73 kg; 394 W maximum; 68 dB at 25 °C
  • NETGEAR Enterprise Lifetime Warranty with 3 years of Sprint support

General

  • Ports: 48 ports
  • Product type: Fully managed 25G/100G switch (Layer 2 / Layer 3)
  • Model name: M4500-48XF8C (model number XSM4556)
  • Part number: XSM4556-100EUS
  • Brand: Netgear
  • EAN: 606449145694

Ports

  • Ethernet ports: 48 x 1G/10G/25GBASE-X SFP28 (speed configurable by multiples of 4 ports; 10G default mode)
  • Uplink ports: 8 x 40G/50G/100GBASE-X QSFP28 (1 x 100G, 1 x 50G, 1 x 40G, 4 x 25G or 4 x 10G breakout; 100G default mode)
  • Management ports: Out-of-band 1G Ethernet (RJ45, front); console: RJ45 RS232 (front); 1 x USB storage (front)
  • Power over Ethernet: None (no PoE ports)

Performance

  • Switching capacity: 4 Tbps (line-rate, non-blocking fabric)
  • Forwarding rate: 2 Bpps
  • MAC address table: 32K entries
  • Packet buffer: 256 Mb
  • Jumbo frames: Up to 9 KB packet size
  • VLANs: 4,093 (802.1Q) simultaneously
  • Link aggregation: 64 LAGs with up to 32 ports per LAG; 63 MLAG groups with up to 32 ports per MLAG
  • Multicast groups: 4K total (2,048 IPv4 and 2,048 IPv6)
  • Routing table: 32K IPv4 and 24K IPv6 unicast routes; 128 static routes
  • Processor and memory: Intel Atom C3558 CPU, 8 GB DDR3 ECC RAM, 128 GB SSD (dual firmware image)
  • MTBF: 289,052 hours at 25 °C

Management

  • Management: CLI, SSH, SNMP, sFlow; NETGEAR AV user interface and Engage Controller via the out-of-band port
  • Layer: Layer 2 and Layer 3 (static and dynamic routing)
  • Layer 2 features: 4,093 VLANs, LAG and Multi-chassis Link Aggregation (MLAG), Auto-LAG and Auto-Trunk, NETGEAR IGMP Plus
  • Layer 3 features: Static and dynamic routing with VRRP, OSPF, BGP, VRF-Lite and PIM-SM/SSM
  • AV features: Pre-configured profiles for Dante, Q-SYS, AES67, NVX, AMX, NDI, SDVoE and others; certified SDVoE-ready

Power

  • Power supply: 2 x APS750W modular PSUs pre-installed (1+1 redundancy), C14 connectors, front-to-back airflow
  • Maximum power consumption: 394 W (all ports used, line-rate traffic)
  • Heat dissipation: 1,344.4 BTU/hr

Physical

  • Dimensions (W x D x H): 440 x 508 x 43.2 mm (1U)
  • Weight: 9.73 kg
  • Mounting: 1U 19-inch rack (two front mounting ears and one rear rail kit included)
  • Cooling: 6 x AFT402 modular fan trays pre-installed (4+2 redundancy), front-to-back airflow, fan speed control
  • Acoustic noise: 68 dB at 25 °C

Environment

  • Operating temperature: 0 to 50 °C
  • Operating humidity: 90% maximum relative humidity, non-condensing
  • Storage temperature: -20 to 70 °C
  • Operating altitude: 3,000 m (10,000 ft) maximum

Compatibility

  • Spare modules: APS750W power supply and AFT402 fan tray (spares sold separately)

Warranty

  • Manufacturer warranty: NETGEAR Enterprise Lifetime Warranty (hardware; product registration required within 90 days of purchase)
  • Included support: 90 days of complimentary technical support; 3 years of Sprint support (24/5 technical support and advance RMA replacement)
  • Switch with two APS750W power supplies and six AFT402 fan trays installed
  • Console cable (DB9 female to RJ-45 serial)
  • Power cord(s)
  • Two mounting ears and screws for rack mounting (front)
  • One set of rail kits for rack mounting (back)
  • Installation guide

UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.

NETGEAR M4500-48XF8C 48-Port 10G/25G SFP28 Fully Managed Switch, 8 x 100G QSFP28 (XSM4556-100EUS)
NETGEAR M4500-48XF8C 48-Port 10G/25G SFP28 Fully Managed Switch, 8 x 100G QSFP28 (XSM4556-100EUS) £17,170.00 Exc VAT · Low stock
Trade pricing availableNext-day UK dispatchGenuine UK stockProject quote supportSecure checkoutExpert pre-sales advice

Customer reviews

★ We're on Trustpilot Bought from us? An honest review helps other installers and IT teams choose. Review us on Trustpilot

Built for B2B buying

From product selection to deployment, this is made for real projects.

Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.

1Check compatibility
2Choose fulfilment
3Deploy with support
Trade quote ready Send your basket for quantity pricing and project supply checks.
Same basket support Add licences, mounts, switches, storage or accessories with confidence.
NETGEAR M4500-48XF8C 48-Port 10G/25G SFP28 Fully Managed Switch, 8 x 100G QSFP28 (XSM4556-100EUS)
Need fit advice? Ask before checkout and avoid wrong-spec purchases.

Why choose us

Procurement that feels fast, clear and trade-ready.

Every product page is designed to help you move from shortlist to checkout with fewer unknowns.

Genuine UK stock New, boxed products sourced through official UK distribution.
Project help Ask for fit checks, renewal advice and quantity pricing.
Fast dispatch Choose UK delivery options for urgent deployments.
Secure checkout Order online or speak to the team for larger baskets.

Common questions

Product and order FAQs

Can I request trade or bulk pricing?

Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.

How quickly can this be delivered?

Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.

Can you help confirm compatibility?

Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.

Do you supply renewals and supporting accessories?

CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.