TP-Link
SX3832TP-Link Omada SX3832 24-Port 10GBASE-T L2+ Managed Switch, 8 x 10G SFP+ Slots (SX3832)
The TP-Link Omada SX3832 24-Port 10GBASE-T L2+ Managed Switch, 8 x 10G SFP+ Slots (SX3832) is a genuine TP-Link product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.
The TP-Link Omada SX3832 is a 24-port 10GBASE-T L2+ managed switch with eight SFP+ slots, for aggregation and high-speed access in business networks. It links servers, NAS storage, other switches and Wi-Fi 6 or Wi-Fi 7 access points over copper and fibre.
It has twenty-four multi-gigabit RJ45 ports that run at 100 Mbps, 1, 2.5, 5 or 10 Gbps and eight 1/10G SFP+ slots, with a 640 Gbps switching capacity, a 240 Mpps forwarding rate and a 32K MAC address table. L2+ features include static routing, VLANs, ACLs, QoS, IGMP Snooping, ERPS, 802.1X and IP-MAC-port binding.
The switch can be run standalone through web, CLI, SNMP and RMON, or adopted by an Omada hardware, software or cloud-based controller. It has no PoE and is cooled by two fans. SFP+ modules are not listed in the package contents, and TP-Link supports no more than two 10G RJ45 SFP+ modules (SM5310-T). The figures cover hardware V1 and V1.20.
What the TP-Link SX3832 is used for
- Aggregation and high-speed access in a business network, as a 24-port 10Gb switch with eight SFP+ slots
- Linking servers, NAS storage and other switches at up to 10 Gbps over copper RJ45 or fibre
- Connecting Wi-Fi 6 or Wi-Fi 7 access points to multi-gigabit ports that also run at 2.5 or 5 Gbps
- L2+ managed switching with static routing, VLANs, ACLs and ERPS, standalone or under an Omada controller
TP-Link SX3832: common questions
What speeds do the SX3832 RJ45 ports support?
The 24 RJ45 ports run at 100 Mbps, 1, 2.5, 5 or 10 Gbps. There are also eight 1/10G SFP+ slots.
How many 10G RJ45 SFP+ modules can the SX3832 take?
No more than two SM5310-T 10G RJ45 SFP+ modules are supported, and TP-Link recommends leaving one column between them. SFP+ modules are not listed in the package contents.
Does this 10G switch supply PoE?
No. It has no PoE; the RJ45 ports and SFP+ slots carry data only.
How noisy is the switch?
It is cooled by two fans. The V1.20 data sheet gives 31.3 dBA minimum, 43.2 dBA typical at 25 °C and 52.0 dBA maximum at 50 °C, measured at 1 m.
Is a console cable included?
Yes. A console cable is in the box with the power cord, rackmount kit and rubber feet. The switch has RJ45 and USB Type-C console ports.
See all TP-Link products or network switches from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 24 x 100 Mbps / 1 / 2.5 / 5 / 10 Gbps RJ45 ports (10GBASE-T)
- 8 x 1/10G SFP+ slots
- 640 Gbps switching capacity, 240 Mpps forwarding rate, 32K MAC address table
- L2+ features: static routing (48 routes), DHCP server/relay, 4K VLANs, LACP, STP/RSTP/MSTP, ERPS
- Security: ACLs, 802.1X, RADIUS/TACACS+, IP-MAC-port binding, DHCP snooping, port security
- Standalone management by web, CLI, SNMP and RMON, or central management with Omada controllers
- RJ45 and USB Type-C console ports; console cable included
- Rack mountable, 440 x 220 x 44 mm, 2 fans; rackmount kit included
- Operating temperature -5 to 50 °C; maximum power consumption 106.5 W at 220 V
General
- Ports: 24 ports
- USB: USB-C
- Product type: L2+ managed 10G multi-gigabit switch with SFP+ slots
- Series: Omada Access Max
- Management type: L2+ managed (standalone or Omada SDN controller)
- Hardware version: V1 / V1.20 (same published specifications except where noted)
- Standards: IEEE 802.3u, 802.3ab, 802.3an, 802.3bz, 802.3z, 802.3ae, 802.3x
- Licensing: No licence needed for standalone management (web, CLI, SNMP); controller functions need an Omada hardware or software controller, or the Omada cloud-based controller
- Certifications: CE, FCC
- Part number: SX3832
- Brand: TP-Link
- EAN: 8885020622652
Ports
- Ethernet ports: 24 x 100 Mbps / 1 / 2.5 / 5 / 10 Gbps RJ45 (TP-Link also lists 10 Mbps for V1.20)
- Uplink ports: 8 x 1/10G SFP+ slots
- Console ports: 1 x RJ45 console port, 1 x USB Type-C console port
Performance
- Switching capacity: 640 Gbps
- Packet forwarding rate: 240 Mpps
- MAC address table: 32K
- Packet buffer memory: 24 Mbit
- Jumbo frame: 9 KB
- Transmission method: Store and forward
Switching and Routing
- Layer 3 features: 128 IPv4/IPv6 interfaces, static routing (48 static routes), 128 static ARP entries, 510 ARP entries, proxy ARP, gratuitous ARP, DHCP server, DHCP relay, DHCP L2 relay
- VLAN: Max 4K VLAN groups, 802.1Q tagged VLAN, MAC VLAN, protocol VLAN, private VLAN, GVRP, VLAN VPN (QinQ), voice VLAN
- Link aggregation: Static link aggregation and 802.3ad LACP; up to 8 aggregation groups, up to 8 ports per group
- Spanning tree: 802.1d STP, 802.1w RSTP, 802.1s MSTP; STP security: TC Protect, BPDU Filter, BPDU Protect, Root Protect, Loop Protect
- Multicast: Up to 4,000 IGMP groups; IGMP Snooping v1/v2/v3 with fast leave, querier and IGMP authentication; MVR; MLD Snooping v1/v2; multicast filtering
- Quality of service: 8 priority queues, 802.1p CoS/DSCP priority, SP / WRR / SP+WRR scheduling, port- and flow-based rate limiting, QoS remark (802.1p, DSCP)
- IPv6: Dual IPv4/IPv6, IPv6 interface, static IPv6 routing, IPv6 neighbour discovery, path MTU discovery, ICMPv6, MLD Snooping, IPv6 ACL, DHCPv6 client, IPv6 SNMP/SSH/SSL/TFTP
- ISP features: L2PT, DLDP, PPPoE ID insertion, ERPS, 802.3ah Ethernet link OAM, DDM
Security
- Access control lists: MAC ACL, IP ACL, combined ACL, IPv6 ACL, packet content ACL, time-based ACL; policies: mirroring, redirect, rate limit, QoS remark; applied to port or VLAN
- Network access control: 802.1X port-based and MAC-based authentication, MAB, guest VLAN, VLAN assignment, RADIUS authentication and accounting, AAA including TACACS+
- Network protection: IP-MAC-port binding (512 entries), DHCP snooping, ARP inspection, IPv4/IPv6 source guard, DHCPv6 snooping, ND detection, DoS defend, DHCP filter
- Port security: Static/dynamic port security (up to 64 MAC addresses per port), broadcast/multicast/unicast storm control, port isolation
- Secure management: HTTPS (SSLv3/TLS 1.2), SSHv1/SSHv2, IP/port/MAC-based access control
Management
- Management options: Web-based GUI, CLI through console port and Telnet, SSH, SNMP v1/v2c/v3 with Trap/Inform, RMON (groups 1, 2, 3, 9), 802.1ab LLDP/LLDP-MED, SNTP, system log
- Maintenance: Dual image, dual configuration, SDM template, DHCP/BOOTP client, DHCP AutoInstall, CPU monitoring, cable diagnostics, EEE, password recovery
- Centralised management: Omada Cloud-Based Controller, Omada Hardware Controller or Omada Software Controller
- Controller features: With an Omada controller: automatic device discovery, batch configuration, batch firmware upgrading, intelligent network monitoring, abnormal event warnings, unified configuration, reboot schedule
- Zero-touch provisioning: Yes, with the Omada Cloud-Based Controller
Power
- Power supply: 100-240 V AC, 50/60 Hz (mains powered; power cord supplied)
- Maximum power consumption: 104.9 W at 110 V / 60 Hz; 106.5 W at 220 V / 50 Hz
- Maximum heat dissipation: 357.81 BTU/h at 110 V / 60 Hz; 363.23 BTU/h at 220 V / 50 Hz
Physical
- Dimensions (W x D x H): 440 x 220 x 44 mm
- Weight: 3.31 kg net (figure from the V1.20 data sheet)
- Cooling: 2 fans
- Acoustic noise: 31.3 dBA minimum, 43.2 dBA typical at 25 °C, 52.0 dBA maximum at 50 °C, measured at 1 m (V1.20 data sheet)
- Mounting: Rack mountable (rackmount kit included)
- Security lock slot: Yes
Environment
- Operating temperature: -5 to 50 °C
- Storage temperature: -40 to 70 °C
- Operating humidity: 10% to 90% RH non-condensing
- Storage humidity: 5% to 90% RH non-condensing
- MTBF: 568,258 hours at 25 °C (V1.20 data sheet)
Compatibility
- SFP / SFP+ modules: TP-Link modules listed in the data sheet: SM311LS, SM311LM, SM321A/B (Gigabit SFP); SM5110-SR, SM5110-LR, SM5110LSA-10, SM5110LSB-10 (10G SFP+); SM331T, SM5310-T (RJ45); SM5220-1M/3M (10G DAC)
- Module note: No more than 2 x 10G RJ45 SFP+ modules (SM5310-T) are supported; TP-Link recommends leaving one column between them
Warranty
- Manufacturer warranty: Limited lifetime warranty (TP-Link UK warranty policy for SMB products; terms and conditions apply)
- SX3832 switch
- Power cord
- Console cable
- Quick installation guide
- Rackmount kit
- Rubber feet
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
