TP-Link
TL-SG1005P-PDTP-Link TL-SG1005P-PD 5-Port Gigabit PoE-Powered Switch, 1 x PoE++ In, 4 x PoE+ Out (TL-SG1005P-PD)
The TP-Link TL-SG1005P-PD 5-Port Gigabit PoE-Powered Switch, 1 x PoE++ In, 4 x PoE+ Out (TL-SG1005P-PD) is a genuine TP-Link product, supplied new and boxed through official UK distribution. It provides the wired network that phones, cameras, access points and computers connect to.
The TP-Link TL-SG1005P-PD is a five-port Gigabit desktop switch that takes its own power from a PoE switch or injector and passes PoE on to up to four devices. It is intended for places with no mains socket, for example a cluster of IP cameras, access points or IP phones at the end of a single cable run.
Port 5 is the PoE input (IEEE 802.3af/at/bt Type 3/Type 4) and ports 1 to 4 are 802.3af/at PoE+ outputs. The output budget depends on the input: 66 W from 802.3bt Type 4 (90 W), 47 W from 802.3bt Type 3 (60 W), 21 W from 802.3at and 9 W from 802.3af. Extend Mode on ports 1 and 2 reaches up to 250 m at 10 Mbps, and PoE Auto Recovery restarts unresponsive devices on ports 1 to 4.
The switch is unmanaged, fanless and metal-cased, and is rated for -30 to 70 °C. It can only be powered over PoE: there is no AC or DC input and no power adapter in the box, so a PoE++ switch or injector is needed to reach the full 66 W budget.
What the TP-Link TL-SG1005P-PD is used for
- Powering up to four IP cameras, access points or IP phones clustered at the far end of one cable run, where there is no mains socket
- A five-port PoE switch that is itself powered over PoE: port 5 takes power in and ports 1 to 4 pass PoE+ on, from a budget of up to 66 W
- Extending PoE and data up to 250 m at 10 Mbps on ports 1 and 2 with Extend Mode
- Cold or hot locations, with a fanless metal case rated for -30 to 70 °C
TP-Link TL-SG1005P-PD: common questions
Does the TL-SG1005P-PD come with a power adapter?
No. Power comes only over PoE through port 5; it has no AC or DC input, and the box contains just the switch and an installation guide. Reaching the full 66 W budget takes a PoE++ switch or injector.
How much PoE power can the TL-SG1005P-PD pass on?
That depends on what feeds it: 66 W with an 802.3bt Type 4 (90 W) input, 47 W with 802.3bt Type 3 (60 W), 21 W with 802.3at and 9 W with 802.3af.
Which ports are PoE in and which are PoE out?
PoE comes in on port 5 (IEEE 802.3af/at/bt Type 3/Type 4) and goes out on ports 1 to 4 as 802.3af/at PoE+.
How far can Extend Mode carry PoE and data?
Up to 250 m on ports 1 and 2, with the port speed dropping to 10 Mbps.
Is this a managed or unmanaged switch?
Unmanaged. It is plug and play, with 802.1p/DSCP QoS and IGMP Snooping. PoE Auto Recovery on ports 1 to 4 reboots powered devices that stop responding.
See all TP-Link products or network switches from every brand.
Need help choosing or pricing a full system? Call 0333 242 1314 or email sales@clisecure.com.
- 5 x 10/100/1000 Mbps RJ45 ports: 1 x PoE In (port 5), 4 x PoE+ Out (ports 1 to 4)
- PoE input IEEE 802.3af/at/bt Type 3/Type 4; PoE output IEEE 802.3af/at
- PoE budget 66 W / 47 W / 21 W / 9 W with 802.3bt Type 4 / bt Type 3 / at / af input
- Powered by PoE only: no AC or DC power input
- Extend Mode (ports 1 and 2): PoE and data up to 250 m at 10 Mbps
- PoE Auto Recovery (ports 1 to 4) reboots dropped or unresponsive powered devices
- 802.1p/DSCP QoS, IGMP Snooping and IEEE 802.3x flow control
- Fanless metal case for desktop or wall mounting, 158 x 101 x 25 mm
- Operating temperature -30 to 70 °C
General
- Ports: 5 ports
- Power over Ethernet: PoE++ (802.3bt)
- Ethernet: Gigabit
- Product type: Unmanaged Gigabit PoE-powered (PoE passthrough) desktop switch
- Management type: Unmanaged (plug and play)
- Hardware version: V1
- Standards: IEEE 802.3i, 802.3u, 802.3ab, 802.3af, 802.3at, 802.3bt, 802.3x, 802.1p
- Certifications: CE, FCC
- Part number: TL-SG1005P-PD
- Brand: TP-Link
- EAN: 4895252501124
Ports
- Ethernet ports: 5 x 10/100/1000 Mbps RJ45 (1 x PoE In, 4 x PoE Out)
- Port features: Auto-negotiation, Auto MDI/MDIX
Power over Ethernet
- PoE standard: Output: IEEE 802.3af/at; input: IEEE 802.3af/at/bt Type 3/bt Type 4
- PoE ports: 4 x PoE Out (ports 1 to 4)
- PoE input: Port 5 (PoE In)
- PoE budget: 66 W with 802.3bt Type 4 (90 W) input; 47 W with 802.3bt Type 3 (60 W); 21 W with 802.3at (30 W); 9 W with 802.3af (15.4 W)
- PoE features: Extend Mode button (ports 1 and 2, up to 250 m, port speed drops to 10 Mbps); PoE Auto Recovery (ports 1 to 4)
Performance
- Switching capacity: 10 Gbps
- Packet forwarding rate: 7.44 Mpps
- MAC address table: 2K
- Transmission method: Store and forward
- Traffic features: IEEE 802.3x flow control, 802.1p/DSCP QoS, IGMP Snooping, MAC address auto-learning and auto-ageing
Power
- Power supply: Powered by a PoE device only (no AC or DC input)
- Maximum power consumption: 2.68 W (90 W PoE in, no PD connected); 68.59 W (90 W PoE in, 66 W PD connected)
- Maximum heat dissipation: 9.112 BTU/h (no PD connected); 233.206 BTU/h (66 W PD connected)
Physical
- Dimensions (W x D x H): 158 x 101 x 25 mm
- Cooling: Fanless
- Casing: Metal
- Mounting: Desktop or wall mounting
Environment
- Operating temperature: -30 to 70 °C
- Storage temperature: -40 to 70 °C
- Operating humidity: 10% to 90% RH non-condensing
- Storage humidity: 5% to 90% RH non-condensing
- TL-SG1005P-PD
- Installation guide
UK shipping options are shown at checkout. For timed delivery, project fulfilment or larger trade orders, contact CLI Secure before placing your order.
Customer reviews
Built for B2B buying
From product selection to deployment, this is made for real projects.
Get the hardware, licences and supporting kit you need without chasing multiple suppliers. CLI Secure helps trade buyers confirm fit, stock, delivery and project pricing before checkout.
Why choose us
Procurement that feels fast, clear and trade-ready.
Every product page is designed to help you move from shortlist to checkout with fewer unknowns.
Common questions
Product and order FAQs
Can I request trade or bulk pricing?
Yes. For multi-unit, reseller or project orders, contact CLI Secure and our team can review the basket for trade pricing.
How quickly can this be delivered?
Available delivery options are shown at checkout. Many in-stock products support next-day or timed UK delivery.
Can you help confirm compatibility?
Yes. Share the existing setup, model numbers or project requirement and we can help confirm suitable hardware, licences or accessories.
Do you supply renewals and supporting accessories?
CLI Secure supplies hardware, renewals, licences and related accessories across networking, CCTV, VoIP and IT support categories.
